Page 1 of 1
2005 2.0 -> 2002 R/T
Posted: Sun Jun 28, 2009 9:52 pm
by Nutmeg
I'm trying to sell my engine, and someone called me today about it. He has a 2002 R/T and is wondering if my 2005 non-mag engine would work. Keep in mind he could swap the PCM and both harnesses. If that happened, would anything else be needed, wiring wise?
Posted: Sun Jun 28, 2009 9:55 pm
by hansken_yo
I believe you would run into the same wiring issues as putting the 2.4 into a 2002.
Posted: Sun Jun 28, 2009 10:18 pm
by Nutmeg
Such as?
Posted: Sun Jun 28, 2009 10:46 pm
by Fuzzyneon
Nutmeg wrote:Such as?
body harness swap i think thats what he is speaking of
Posted: Sun Jun 28, 2009 11:06 pm
by INVUJerry
Don't do it.
Posted: Mon Jun 29, 2009 12:24 pm
by hansken_yo
Nutmeg wrote:Such as?
I was referring to all the wiring differences that you have to address for the 00-02 found in this section (I don't know what they are exactly, just that they are in here for the 2.4 swap).
Posted: Mon Jun 29, 2009 12:58 pm
by Danteneon
He would have to change the PCM, Engine harness, Chassis harness, and all of the 05 emissions equipment.
It really is the same amount of work to do this swap as it is to do a SRT (wiring and support-wise)
I vote don't do it, but it's his car. Ask him if I can have his old drivetrain
Posted: Mon Jun 29, 2009 1:29 pm
by Nutmeg
Yeah, he didn't want to mess with all the wiring, and I don't blame him. Thanks anyway guys.
Posted: Mon Jun 29, 2009 1:59 pm
by Danteneon
NGC...the trump card for 00/01/02-03/04/05 swaps everywhere
