SRT swap
-
- 2GN Member
- Posts: 55
- Joined: Sat Oct 19, 2013 9:21 pm
SRT swap
Plannin this in the near future, anyway i was tradin the how tos in the srt forum an found a boost solenoid delete using resistors in the pigtails an it says yyou must have an aftermarket wastegate. would this eliminate the need to swap the body harness? Hopee i made sense thanks.
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Since you have an '03, the body harness should already be compatible.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
-
- 2GN Member
- Posts: 55
- Joined: Sat Oct 19, 2013 9:21 pm
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
Just to clarify, I've realized a lot of people that aren't very educated on this call the engine bay harness the body harness which I'm guessing you are too by your question. To answer it, no... that will not solve your problem.
You will need an engine bay harness as well as the engine harness. the actual body harness (under dash to back by tail lights) does not need to be swapped. The engine bay harness has more than just solenoid wiring on it. Wiring for TIP, IAT and a few other things are all different. your best bet is to find an engine bay harness on ebay. I've seen people try to cut corners and use a non SRT bay harness only to end up having to buy one and swap it out.
You will need an engine bay harness as well as the engine harness. the actual body harness (under dash to back by tail lights) does not need to be swapped. The engine bay harness has more than just solenoid wiring on it. Wiring for TIP, IAT and a few other things are all different. your best bet is to find an engine bay harness on ebay. I've seen people try to cut corners and use a non SRT bay harness only to end up having to buy one and swap it out.
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus
-
- 2GN Member
- Posts: 55
- Joined: Sat Oct 19, 2013 9:21 pm
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
No problem. Just don't want you to end up getting everything in then realizing you really do need the engine bay harness.
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus
-
- 2GN Member
- Posts: 55
- Joined: Sat Oct 19, 2013 9:21 pm
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
SKIM and keyless entry are two separate systems, but the answer is still yes you just need your VIN flashed in the SRT pcm and everything will work fine. As a matter of fact... See my signature? I can do that for you when you're ready, just PM me and we can talk.
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus
-
- 2GN Member
- Posts: 55
- Joined: Sat Oct 19, 2013 9:21 pm