Page 15 of 15

Posted: Sun May 01, 2011 1:14 pm
by Neon4Life
Ok. Thanks for the info.

Posted: Sun May 01, 2011 10:44 pm
by occasional demons
Only need '03 up hubs/bearings. The bearings/hubs changed in '02 at some point. So later '02's may also work. (The bearings/hubs are wider.)

Dante just posted this recently in another thread. So Manny, you are good to go. :D

Posted: Wed May 18, 2011 12:23 am
by NiteHawk
OD bro, i REALLY hate to tell you this man.....but he doesnt need new hubs to use SRT axles...

it's for a long time been a common misconception that the SRT and Neon axles wont fit the same hub.......

but i tell you, here, and now, they will, without ANY doubt fit in the exact same hub.

First off, there's ONLY ONE part number listed for 03/04/05 neon and SRT front hubs... two different bearings, yes, but the hubs are identicle...

Next... If they didnt mix, then please explain to me why I have "SRT" front hubs and my original factory installed axles (non srt) and have zero issues what so ever...

so please, lets all understand this together... front AND rear hubs are interchangable between SRT and nonSRT.

Posted: Wed May 18, 2011 12:26 am
by Neon4Life
^


yeah he posted that because we got to talking and now i realize i dont need my hubs i have that i spent money on and bought from rock auto so idk if i can return them. o well. i might just end up installing them anyways i guess.

Posted: Wed May 18, 2011 8:27 am
by Danteneon
Here's the deal...

All 2nd gen Neons (incl SRTs) have the same hub spline size and count.

2000-mid 2002 Neons have 33mm wide bearings. Mid 2002-2005 Neons and SRTs have 39mm wide bearings. The knuckle, hub and bearings are different beacause of the width difference.

The SRT axle shaft will fit on either hub size.

There is NO difference in the rear hub and bearing in any year/model (2000-2005)

All better? :D

Posted: Wed May 18, 2011 9:02 am
by heydockyle
I said you may need them but wasn't sure. Hence find out for sure because I don't know.

OD said you DIDN'T need them, because you have an 03+...
I'm pretty sure he was just saying you need 03+ hubs, not 03+ srt hubs, because that would be retarded to say it like that because they only made 03+ srt's...

Posted: Wed May 18, 2011 9:32 am
by Neon4Life
true.

guess i got confused from trying to understand what he was trying to say.. idk. so if i wanted to install these hubs then they should work fine correct..? i see all 03 any model neon has same part numbers on bearings and hubs.. reason for using them and not returning them well cause my car has 140k miles and why not just change em out as idk if they have ever been changed before.

Posted: Wed May 18, 2011 9:44 am
by occasional demons
My thinking was if the hubs are wider, the spline length may also be longer, so they might not have let the axle nut tighten correctly if used with the narrower bearing/hub. But I guess the splines are short enough to use with either. I had no doubt they would slide into either hub.

Posted: Tue Aug 09, 2011 11:37 am
by Jillustre
Can I use the manual transmission from my 05 sxt on the srt engine?

Posted: Tue Aug 09, 2011 11:47 am
by Danteneon
Yes. This has been covered quite a bit.

Posted: Wed Oct 19, 2011 9:43 pm
by srtjesse
awesome info on here thanks guys

Posted: Sat Apr 21, 2012 10:27 pm
by speed127
maybe this was asked in the 15 or so previous pages but I just want to be sure.... Can I use a stock hood on my SRT swap? or do I need the srt hood as well. My thinking is that I can just use the stock hood but will need to cut out some bracing.

Posted: Sun Apr 22, 2012 2:20 pm
by Neon4Life
stock hood works just fine.

Posted: Sun Aug 25, 2013 12:22 am
by srt4eh
I noticed earlier it was mentioned that the 2000 neon's didn't come with SKIM but mine did? I'm having an issue with my swap but I don't want to garbage up this thread. Thanks

viewtopic.php?t=66517

Posted: Wed Sep 11, 2013 2:33 pm
by slickneon19
What you got goin on?? if you want you can pm me. I will probably respond quicker.

Re: SRT-4 Engine Swap

Posted: Sun Jul 01, 2018 1:49 pm
by Dairydew019
Would you need all the same to swap the srt4 engine in a 2001 neon