2GN.ORG

Posted: **Sun Feb 25, 2007 7:28 am**

Question???

I have a 2005 Neon SXT - Automatic

Do they make a different shifters for an automatic? I have been looking but havent seen anything. I have been wanting to change mine out but Im wondering if they even make them at this point lol.

Posted: **Sun Feb 25, 2007 2:26 pm**

I have one that a friend gave me...

I think it was from matrix racing or something like that....its gunmetal w/ cf around the middle part.

Posted: **Sun Feb 25, 2007 4:26 pm**

It looks good. The one that is in the car looks generic in a way an I want to spruce it up some lol. Thanks a lot!

Posted: **Sun Feb 25, 2007 4:32 pm**

Oh I thought you were looking for different shifters. If you want just a different shift knob, yeah, they're everywhere. Definitely doesn't have to be Neon-specific. Most aftermarket push-button knobs will work.

Posted: **Sun Feb 25, 2007 8:39 pm**

any universal push button knob will work, and i think even any shift knob for a manual will work too, just push down and shift... i love my leather atx shiftknob.. looks the same as the regular atx knob but leather obviously... dont have a pic, but can get one if needed..

Posted: **Sun Feb 25, 2007 9:47 pm**

scneonchic wrote:I have one that a friend gave me...

I think it was from matrix racing or something like that....its gunmetal w/ cf around the middle part.

i had that in my 00. my only complaint was i could never get it to stay tight. had a nice feel but i could never keep it tight.

Posted: **Mon Feb 26, 2007 4:26 am**

so any push button will work huh? even if the button is on the top an my button is more towards the front? How do you install them? I know with some you just screw them on is that the same way with this type too?

Posted: **Mon Feb 26, 2007 6:27 am**

the stock one has a little allen key screw in front of it.. the button is basiaclly a lever, so even if the button is on the front, the switch is still push down, you can see if you take off the shifter... any universal one will come with all kinds of diff size adapters, just use the one that fits yours... 99% of them will just slide on, and you'll tighten up a couple allen screws

Posted: **Mon Feb 26, 2007 6:47 am**

SWEET! Thanks a lot!

Posted: **Tue Feb 27, 2007 5:50 pm**

TNK wrote:i had that in my 00. my only complaint was i could never get it to stay tight. had a nice feel but i could never keep it tight.

same here! and i dunno why, maybe i didnt put it on properly but sometimes it won't shift smoothly
________
Health Shop

Posted: **Tue Feb 27, 2007 5:58 pm**

hmmmm....

Posted: **Tue Feb 27, 2007 7:48 pm**

yeah...im thinking that ill take mine off too, because it wont stay tightened either. I guess i just dont feel like taking out my center console

Posted: **Tue Feb 27, 2007 8:25 pm**

why would you hafta take outyour console to take the shifter off?

Posted: **Tue Feb 27, 2007 9:32 pm**

edit: i dont know LOLOLOL

I dont konw what i was thinking! hahahaha

me =

Posted: **Tue Feb 27, 2007 9:34 pm**

yeah you don't have to take out the cc to put the stock one back on, just put it in and tighten it w/ the orig. screw

...they need to make better ones for us
________
Honda Z50R history

Posted: **Tue Feb 27, 2007 9:44 pm**

yeah...i thought about that afterwards.

I dont know what i was thinking.

Posted: **Tue Feb 27, 2007 9:47 pm**

crackhead....

Posted: **Tue Feb 27, 2007 10:49 pm**

Step away from the computer...... LOLOL j/k

Posted: **Wed Feb 28, 2007 3:53 am**

i kind of like boorahdurukan's shifter from neons.org: http://i49.photobucket.com/albums/f273/ ... 0007-3.jpg

& i think it's only $20 something on ebay
________
Honda Deauville

Posted: **Thu Mar 01, 2007 3:10 pm**

That is a nice one. Thanks for posting the link.

Posted: **Thu Mar 01, 2007 3:15 pm**

aquariuskid2001 wrote:any universal push button knob will work, and i think even any shift knob for a manual will work too, just push down and shift... i love my leather atx shiftknob.. looks the same as the regular atx knob but leather obviously... dont have a pic, but can get one if needed..

Pic and where did you get it?

Thanks,

John

Posted: **Fri Mar 02, 2007 6:22 am**

EmersonHart13 wrote:Pic and where did you get it?

Thanks,

John

ebay for like 5-10$ havent seen one on there lately... i'll get a pic today and post it up later for u..

edit: i didnt realize this wasnt the original poster when i replied, so sorry for the jack.. but i'll post the pic anyway because i really like the stock leather shifter...

Posted: **Fri Mar 02, 2007 8:47 am**

Sweet thanks! I love having a leather shift know. Now all I need is a leather wrapped steering wheel. Ha!

John

Posted: **Fri Mar 02, 2007 10:59 pm**

^ yeah i agree, that's a good one , the leather is just a sleeve slipped onto the oem right?
________
FJR1300

Posted: **Fri Mar 02, 2007 11:36 pm**

scneonchic wrote:I have one that a friend gave me...

I think it was from matrix racing or something like that....its gunmetal w/ cf around the middle part.

i'm so used to seeing the picture without the knob

and you get nominated for

of the week

Posted: **Sat Mar 03, 2007 5:03 am**

^ LOL

Posted: **Sat Mar 03, 2007 5:54 pm**

I hate you sam!

LMAO

it was just taken off in that one pic you saw...stupid thiing comes loose all the time

Posted: **Thu Mar 08, 2007 2:57 am**

^ i am actually selling mine (the same cf one w/ orig. package) if anybody wants it???!
________
Buy Cannabis Seeds

Posted: **Sat Mar 10, 2007 2:07 am**

I have one on mine just like that, wierd, mine has never come loose or anything.

By the way, I thought I would mention that any console shifted automatic from Dodge/Chrysler/Jeep will bolt right onto out auto shifters.

My brother had a Chrysler Concorde and I tried it on mine, bolted right up, it was a leather knob.

I also tried my buddies Jeep Cherokee knob, it worked fine too, it was a t-handle knob.

Posted: **Sat Mar 10, 2007 2:31 pm**

when i was still rockin my 00 ATX, i wanted to get a PT shifter.. but never did

2GN.ORG

New shifter for automatics????

New shifter for automatics????