Page 1 of 1
SRT/4 Cluster in an '00 SE
Posted: Fri May 04, 2007 2:41 pm
by Arro
two questions:
1. Why does the CEL come on if you don't run an SRT/4 cluster with an SRT/4 engine swap?
2. Will an SRT/4 cluster work on a 2G SOHC? What will happen if I put the cluster in before the engine swap? More CEL's?
Posted: Fri May 04, 2007 2:59 pm
by racer12306
Posted: Fri May 04, 2007 3:08 pm
by Arro
Perfect, thank you!
Posted: Fri May 04, 2007 7:21 pm
by 2001DodgeNeonSe
I put mine in a 2001 Se. It plugs right in place of the old one. I didnt get any cel codes. The only thing you will get, which I got was the parking brake light and and security light stayed lit. Just take out the 2 bulbs behind the cluster. Everything else works fine. I even tested the speedo with another car driving down the street, speed was right on. If your car didnt come with a tach, now it has one. The mileage is stored in the cluster and the pcm. So whatever the mileage was on the car you got your cluster, that mileage will read on your cel screen. So if that cluster is the cluster from the srt motor your gonna swap in then i would wait till you swapped your motor so your mileage would be right on.
Posted: Mon May 07, 2007 7:48 pm
by stang892k5
i have an 02 se and the srt4 gauge cluster on my ride and its plug and play no problems but as 2001dodge said the only thing that comes on is your brake light and the abs light unless you have abs,but other then that it works just fine
Posted: Thu Sep 20, 2007 6:35 pm
by 01neon01
will having either the brake light, abs or alarm light on affect the car in any way? i just installed a cluster with a tach and all three of these light and i think one more stayed on.
Posted: Thu Sep 20, 2007 9:14 pm
by Wenuden
it won't cause any problems till you take it to get service work done and they superduper overfill the brake fluid reservoir like they did on mine, even though the work order clearly reads "don't touch the brake fluid, the light is on because the pinout is different than the stock cluster." damn retarded dealership.
now, on that same note, you'll never know if you actually are low on fluid or have a problem that the light comes on for.
Posted: Thu Sep 20, 2007 9:43 pm
by 01neon01
cool thanks for the info. i dont let people work on my car unless i really dont know how to do something or have the right tools.
Posted: Thu Sep 20, 2007 10:20 pm
by Wenuden
the work i was having done was warranty work, CV boot before Carlysle, they decided to be nice and top off the fluids and do an oil change...
Posted: Sun Sep 30, 2007 10:27 pm
by 01NeonSnooZer
What about neons without a tach? Mine has no tach. Would the SRT-4 cluster still work? I haven't seen anyone make any comments or suggestions on this. Also, can the dealership reflash the mileage for a cluster replacement to match the mileage on the car?
Posted: Mon Dec 03, 2007 7:38 pm
by FAC3L3SS
if you don't have a tach, you will now. a working one. i JUST put an srt one in my '00 es. NO cel codes or lights stay on. just reads different miles. and it tells me when my cruise is on, but not set like my stock one did. and the MPH and RPMS are dead on.