cluster bulbs?

neon angel · Post by **neon angel** » Sun Oct 28, 2007 4:06 am

ok do he have 194 bulbs ? cuz i want to put purple in so would these work http://autolumination.com/srt4.htm ? and how many would i need

jT · Post by jT » Sun Oct 28, 2007 8:34 pm

any 194 wedge type will work, i think it was 6 for the main cluster

NiteHawk · Post by **NiteHawk** » Sun Oct 28, 2007 9:51 pm

just as a suggestion.... try www.superbrightleds.com instead

the bulbs from autolumination are known to burn out quickly

Paul56 · Post by **Paul56** » Mon Oct 29, 2007 8:02 am

neon angel wrote:ok do he have 194 bulbs ? cuz i want to put purple in so would these work http://autolumination.com/srt4.htm ? and how many would i need

I just did mine recently, but for the life of me I cannot remember if it was 6 or 8. My excuse is old age.

When doing this I also removed the circuit board protector from the rear of the cluster to have easier access... it comes off with a few screws. I also needed to use the pliers on a couple of the bulb sockets as gentle persuasion to get them twisted out.

I went with the clear long life 194s.

Post by **jonnymopar** » Tue Oct 30, 2007 9:24 am

Be careful doing purple.

The overlay on the cluster is tinted a bluish-green already. Blue will shine through, red will not. Purple consists of blue and red, so you may only get a dull blue showing through because the red has been filtered out.

Whatever color you choose, you'll need 6 of the 194-based bulbs for the cluster.

2GN.ORG

cluster bulbs?

cluster bulbs?

Re: cluster bulbs?