Page 1 of 1
shifter leds
Posted: Mon May 19, 2008 8:33 pm
by Ntyvirus1
i know there are write ups on the cluster and the HVAC but how would i go about changing the light in the shifter ( i have an ATX) or just what sizr LEDs do i need and ill just tinker around down there until it gets done
Posted: Mon May 19, 2008 8:41 pm
by 2001Neon_LX
Same size led that goes into the cluster, just take you center console out and then you can pull the bulb out of the bottom side of the shifter bezel.
Posted: Mon May 19, 2008 9:00 pm
by jetas
There is no LED. Its 1 small bulb. I dont know the size though
Posted: Mon May 19, 2008 9:01 pm
by 2001Neon_LX
Its a 194 bulb, i didn't mean an led.
Posted: Mon May 19, 2008 9:18 pm
by Ntyvirus1
thnx
Posted: Sun May 25, 2008 5:08 pm
by bdmski
Take out the armrest and everything. You will see the base of it under the shifter. Don't be afraid to get some plyers and yank it out. It takes some force to get it out.
Posted: Thu Dec 18, 2008 5:23 pm
by sidepipe87
sorry to bring up an old thread, but I figured there was no need to start a new one. I was just curious what type of 194 LED people have used in the gear selector with good success? WLED? Inverted cone?
also, what type of LED would work for the defroster button?
thanks.