manual locks/windows to power windo/lock swap

Questions about interior lighting, shift knobs, just anything mainly to do with modifications on the inside of the car. Ask those questions here.
Post Reply
Posts: 18
Joined: Tue May 07, 2013 11:15 pm

manual locks/windows to power windo/lock swap

Post by RTdodgeneon » Sun Sep 01, 2013 4:28 pm

How easy is swapping base model with no power locks, windows, and adding keyless entry in a 2002 neon? I found a clean one but no options and have a junkyard full of 2nnd gens
02 R/T (Silver) bone stock with leather, sunroof, and pure sexiness!

2005 Stone White ACR Stage 3 w/toys
MPx BFMIC, Mpx o2, ACT clutch,Mpx dual exit, n2mb WOT/2step, Maddog STS, Boomba catch can, Hard pipes, HKS bov, Mopar CAI, Solid mounts, Built bottom end, ACR struts with Mopar springs and sway bars, Devilsown Meth kit, Mopar pistol grip

1/4 @ 12.9@ 112 MPH

occasional demons
Junior Admin
Posts: 19247
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Tue Sep 03, 2013 9:19 am

Depends on what connectors/wires the 2002 harness has in the dash harness. You may need to swap an entire dash harness, plus add the door harnesses. And it would need to be from a 2001/2002 MY.

Otherwise you will need to swap the connectors and some wiring between the harnesses under the driver side, where the engine bay harness connects.

The connector styles may not be the same for the wires either. I know for Speed Control, they switched which connectors were used, and the actual slides in the connector are different.

The door hardware you may be able to use from any 2001 up, but the dash harness is going to be the key part.
dblsg wrote:ya'll a bunch of post whores

2001 Neon ES MTX with '02 R/T PCM
Help support 2GN!

Post Reply

Return to “Interior”