Cookout on the southside of Indianapolis August 6th

For Clubs and Events in: IL,IN,MI,MN,MO,OH,WI
runs with scissors
2GN Member
Posts: 45
Joined: Sun Dec 27, 2009 11:59 pm
Location: Indianapolis, IN

Cookout on the southside of Indianapolis August 6th

Post by runs with scissors » Thu May 19, 2011 2:57 am

There is a cookout in Greenwood on August 6th. Park will be decided when it gets closer to the date and we have a good idea how many people are coming. All you have to bring is your neon. Nothing special, just an excuse to get together and have a cookout. Time will also be decided when the park is chosen, more than likely around the 12pm to 2pm range and last until everyone is gone.
Interest so far:

Me (coming for sure)
99indiana (unless he has to work)
newlitemotorist (maybe)
Gramps (coming for sure)
Ianguilly (if he doesn't have to work)
Neon4life (shows interest, won't know until last minute)
Drifterz73 (if he gets his mtx swap done by then)
DOHC5sp2dr (trying to make arrangements to show up)
1stgentwofour (says he will come)
FAC3L3SS (pending solid size group, 4 hour drive)
custom95neon (coming for sure)
Jimbo in MI (too early for him to say for sure)
Last edited by runs with scissors on Thu Jul 07, 2011 2:46 am, edited 5 times in total.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, Indy +1mm stainless valves, AEM 3-bolt cam gear almost ready to bolt on

Midnight_Rider
Spam Avenger!
Posts: 9007
Joined: Wed Aug 02, 2006 2:49 am
Location: Kokomo, IN

Post by Midnight_Rider » Thu May 19, 2011 3:15 am

July 16th is the last day of my summer vacation so I'll still be basking in the afterglow of Carlisle. :D I can get someone to cover for me at work on August 6th also so I'm flexible.
Official "I'm Going To Drive My Neon 'til It Dies" Club #10

runs with scissors
2GN Member
Posts: 45
Joined: Sun Dec 27, 2009 11:59 pm
Location: Indianapolis, IN

Post by runs with scissors » Sat May 21, 2011 3:58 pm

Local guys are showing no interest in a meet so plans may be changing.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, Indy +1mm stainless valves, AEM 3-bolt cam gear almost ready to bolt on

Midnight_Rider
Spam Avenger!
Posts: 9007
Joined: Wed Aug 02, 2006 2:49 am
Location: Kokomo, IN

Post by Midnight_Rider » Sat May 21, 2011 11:17 pm

runs with scissors wrote:Local guys are showing no interest in a meet so plans may be changing.
Deja vu- sounds like the meet FAC3L3SS tried to set up a couple of years ago but we made it fun! :lol:

If we can't get anything set up here, eljclide (Eric) is trying to organize another Dayton, OH meet. :thumbup:
Official "I'm Going To Drive My Neon 'til It Dies" Club #10

FAC3L3SS
2GN Veteran
Posts: 6517
Joined: Thu Apr 12, 2007 8:58 pm
Location: NIN

Post by FAC3L3SS » Sun May 22, 2011 1:34 am

Hell I BOUGHT this Neon in Greenwood. Weird interest is generated but turnouts are typically weak. I'd be interested pending a solid sized group. Four hour drive here.
el. oh. el.

runs with scissors
2GN Member
Posts: 45
Joined: Sun Dec 27, 2009 11:59 pm
Location: Indianapolis, IN

Post by runs with scissors » Sun May 22, 2011 6:13 am

The last years in row were complete failures but I thought I would try again. If there isnt any interest soon I will put my efforts towards helping Eric with another dayton meet. I just dont feel like renting another shelter house and buying a buttload of food and no one show up, again. I am not giving up just yet, but pms to locals have been read with no replies. I know the neon scene is pretty much non-existent around here but I am still trying. I try to make it worth the trip with free food but that doesnt even work. Stay tuned, we will figure something out.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, Indy +1mm stainless valves, AEM 3-bolt cam gear almost ready to bolt on

Midnight_Rider
Spam Avenger!
Posts: 9007
Joined: Wed Aug 02, 2006 2:49 am
Location: Kokomo, IN

Post by Midnight_Rider » Sun May 22, 2011 11:02 am

runs with scissors wrote:I am not giving up just yet, but pms to locals have been read with no replies. I know the neon scene is pretty much non-existent around here but I am still trying. I try to make it worth the trip with free food but that doesnt even work. Stay tuned, we will figure something out.
My .02 worth- your effort is appreciated. :thumbup:
Official "I'm Going To Drive My Neon 'til It Dies" Club #10

runs with scissors
2GN Member
Posts: 45
Joined: Sun Dec 27, 2009 11:59 pm
Location: Indianapolis, IN

Post by runs with scissors » Tue May 24, 2011 4:02 pm

First post has been updated a some new info
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, Indy +1mm stainless valves, AEM 3-bolt cam gear almost ready to bolt on

stdlystdmufn
2GN Member
Posts: 1019
Joined: Sun Feb 19, 2006 7:29 pm
Location: Indianapolis, IN
Contact:

Post by stdlystdmufn » Tue May 24, 2011 8:17 pm

I would love doing a meet in greenwood, but i don't get out of work till 3 on sat. which means 3:30-3:45 before i can get to Gwood from the north side...somaybe a 2-4pm meet??? as long as some people will stay past 3 i'd make it. (also this is asuming they don't change my drill dates)
Image
in the middle of a DOHC and MTX swap and going with an ASP kit pwered by the S259 batmowheel

runs with scissors
2GN Member
Posts: 45
Joined: Sun Dec 27, 2009 11:59 pm
Location: Indianapolis, IN

Post by runs with scissors » Tue May 24, 2011 9:06 pm

The time is still up for negotiation. I personally dont care what time and the people helping me dont really have a preference either, that they have mentioned anyway. I think a couple people in ohio are interested in coming and they probably would like a later time as well. Whatever time you guys want to meet is cool with me. The shelter rentals are all day until dark I believe so anytime.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, Indy +1mm stainless valves, AEM 3-bolt cam gear almost ready to bolt on

User avatar
Neon4Life
2009 Silver Contributor
Posts: 4251
Joined: Tue Sep 16, 2008 1:56 pm
Location: Indiana

Post by Neon4Life » Tue May 24, 2011 9:28 pm

Someone PM me when a date is set for this. Id be up to meet wit everyone. Tho I wouldn't be able to say for sure till like the night before the meet.
Official "I'm Going to Drive My Neon till it Dies" Club #000048

Midnight_Rider
Spam Avenger!
Posts: 9007
Joined: Wed Aug 02, 2006 2:49 am
Location: Kokomo, IN

Post by Midnight_Rider » Wed May 25, 2011 12:52 am

Neon4Life wrote:Someone PM me when a date is set for this. Id be up to meet wit everyone.
runs with scissors wrote:There is a cookout on the southside of Indianapolis in Greenwood on August 6th.
Official "I'm Going To Drive My Neon 'til It Dies" Club #10

User avatar
Neon4Life
2009 Silver Contributor
Posts: 4251
Joined: Tue Sep 16, 2008 1:56 pm
Location: Indiana

Post by Neon4Life » Wed May 25, 2011 12:58 am

Do'h. That's really far away from rite now. Someone remidn me in august again. Lol.
Official "I'm Going to Drive My Neon till it Dies" Club #000048

runs with scissors
2GN Member
Posts: 45
Joined: Sun Dec 27, 2009 11:59 pm
Location: Indianapolis, IN

Post by runs with scissors » Wed May 25, 2011 1:12 am

Neon4Life wrote:Do'h. That's really far away from rite now. Someone remidn me in august again. Lol.
Lol. People complained last year that a month wasn't enough time to make arrangements to come. They will have to come up with a better excuse this year.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, Indy +1mm stainless valves, AEM 3-bolt cam gear almost ready to bolt on

Midnight_Rider
Spam Avenger!
Posts: 9007
Joined: Wed Aug 02, 2006 2:49 am
Location: Kokomo, IN

Post by Midnight_Rider » Fri May 27, 2011 2:23 am

I now officially have August 6th off. :D
Official "I'm Going To Drive My Neon 'til It Dies" Club #10

Midnight_Rider
Spam Avenger!
Posts: 9007
Joined: Wed Aug 02, 2006 2:49 am
Location: Kokomo, IN

Post by Midnight_Rider » Sun Jun 05, 2011 11:28 pm

BUMP for possible updates- is this still on?
Official "I'm Going To Drive My Neon 'til It Dies" Club #10

runs with scissors
2GN Member
Posts: 45
Joined: Sun Dec 27, 2009 11:59 pm
Location: Indianapolis, IN

Post by runs with scissors » Sun Jun 05, 2011 11:33 pm

It's still on or the 6th of August. No updates yet.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, Indy +1mm stainless valves, AEM 3-bolt cam gear almost ready to bolt on

Midnight_Rider
Spam Avenger!
Posts: 9007
Joined: Wed Aug 02, 2006 2:49 am
Location: Kokomo, IN

Post by Midnight_Rider » Sun Jun 05, 2011 11:43 pm

\:D/
Official "I'm Going To Drive My Neon 'til It Dies" Club #10

stdlystdmufn
2GN Member
Posts: 1019
Joined: Sun Feb 19, 2006 7:29 pm
Location: Indianapolis, IN
Contact:

Post by stdlystdmufn » Sun Jun 05, 2011 11:58 pm

just found out i have a 3 week AT this year and don't get home til the 13th of aug...only 1.5 years left
Image
in the middle of a DOHC and MTX swap and going with an ASP kit pwered by the S259 batmowheel

Midnight_Rider
Spam Avenger!
Posts: 9007
Joined: Wed Aug 02, 2006 2:49 am
Location: Kokomo, IN

Post by Midnight_Rider » Mon Jun 06, 2011 12:02 am

And we will be glad when you are finished so that you can come to meets! =D>
Official "I'm Going To Drive My Neon 'til It Dies" Club #10

ianguilly
2GN Member
Posts: 465
Joined: Wed Dec 02, 2009 6:35 pm
Location: Cincinnati, OH

Post by ianguilly » Mon Jun 06, 2011 6:46 pm

Hmmm i schedule off for work that day, but will see once August get closer...
-Neon #3 1999 Neon R/T coupe,DOHC MTX
-Neon #4 1998 Neon Alpine green coupe SOHC MTX -daily shit box

Official "I'm gonna drive my Neon until it dies" Club Member #110

Midnight_Rider
Spam Avenger!
Posts: 9007
Joined: Wed Aug 02, 2006 2:49 am
Location: Kokomo, IN

Post by Midnight_Rider » Tue Jun 07, 2011 2:02 am

You WILL be there. That is all. :salute:
Official "I'm Going To Drive My Neon 'til It Dies" Club #10

ianguilly
2GN Member
Posts: 465
Joined: Wed Dec 02, 2009 6:35 pm
Location: Cincinnati, OH

Post by ianguilly » Wed Jun 08, 2011 12:19 am

ha ha I scheduled off for the 6th so we'll see.
-Neon #3 1999 Neon R/T coupe,DOHC MTX
-Neon #4 1998 Neon Alpine green coupe SOHC MTX -daily shit box

Official "I'm gonna drive my Neon until it dies" Club Member #110

Midnight_Rider
Spam Avenger!
Posts: 9007
Joined: Wed Aug 02, 2006 2:49 am
Location: Kokomo, IN

Post by Midnight_Rider » Fri Jun 17, 2011 9:30 am

BUMPITY to the top so everyone will remember to attend! :gears:
Official "I'm Going To Drive My Neon 'til It Dies" Club #10

runs with scissors
2GN Member
Posts: 45
Joined: Sun Dec 27, 2009 11:59 pm
Location: Indianapolis, IN

Post by runs with scissors » Mon Jun 20, 2011 5:19 am

My plan is to go park hunting this week. More than likely it will be at University park like last year. I liked it because parking is right next to the shelter. Plus it's pretty much right off I65 and is easy to find
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, Indy +1mm stainless valves, AEM 3-bolt cam gear almost ready to bolt on

ianguilly
2GN Member
Posts: 465
Joined: Wed Dec 02, 2009 6:35 pm
Location: Cincinnati, OH

Post by ianguilly » Mon Jun 20, 2011 11:45 pm

runs with scissors wrote:My plan is to go park hunting this week. More than likely it will be at University park like last year. I liked it because parking is right next to the shelter. Plus it's pretty much right off I65 and is easy to find
I spent 15 mins looking for the entrance, maybe we can put a sign by the entrance. :tardbang:
-Neon #3 1999 Neon R/T coupe,DOHC MTX
-Neon #4 1998 Neon Alpine green coupe SOHC MTX -daily shit box

Official "I'm gonna drive my Neon until it dies" Club Member #110

Midnight_Rider
Spam Avenger!
Posts: 9007
Joined: Wed Aug 02, 2006 2:49 am
Location: Kokomo, IN

Post by Midnight_Rider » Mon Jun 20, 2011 11:49 pm

I have no idea where that park is so someone will have to post directions.
Official "I'm Going To Drive My Neon 'til It Dies" Club #10

runs with scissors
2GN Member
Posts: 45
Joined: Sun Dec 27, 2009 11:59 pm
Location: Indianapolis, IN

Post by runs with scissors » Tue Jun 21, 2011 2:40 am

ianguilly wrote:
runs with scissors wrote:My plan is to go park hunting this week. More than likely it will be at University park like last year. I liked it because parking is right next to the shelter. Plus it's pretty much right off I65 and is easy to find
I spent 15 mins looking for the entrance, maybe we can put a sign by the entrance. :tardbang:
I drove by it I dont know how many times before I found it. It shares an entrance with a subdivision so it was hard to find. If thats where we have it I will mention the name of the subdivision or put up a sign or balloons or something.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, Indy +1mm stainless valves, AEM 3-bolt cam gear almost ready to bolt on

ianguilly
2GN Member
Posts: 465
Joined: Wed Dec 02, 2009 6:35 pm
Location: Cincinnati, OH

Post by ianguilly » Mon Jun 27, 2011 7:37 pm

Head count??? almost a whole month away!
-Neon #3 1999 Neon R/T coupe,DOHC MTX
-Neon #4 1998 Neon Alpine green coupe SOHC MTX -daily shit box

Official "I'm gonna drive my Neon until it dies" Club Member #110

runs with scissors
2GN Member
Posts: 45
Joined: Sun Dec 27, 2009 11:59 pm
Location: Indianapolis, IN

Post by runs with scissors » Mon Jun 27, 2011 8:37 pm

Still no interest from anyone. Looks like it will just be a few of us.
1995 Highline Coupe SOHC MTX.
DOHC Mopar PCM
e85, 30lb injectors, LM-1, SAFC
Custom CAI, 60mm MPx TB, AMM Box Intake, DOHC pistons, built4race UDP
PT Clutch, 3.94 FD
AF/X LTH, High Flow Cat, Spiral Flow, 2.5" piping, Flowmaster 80 series

P&P Magnum head, Crane springs, Crane 007, Indy +1mm stainless valves, AEM 3-bolt cam gear almost ready to bolt on

Post Reply

Return to “Midwest”