Outer C pillars... in cf of course :P

rice_eater · Post by **rice_eater** » Sat Feb 17, 2007 2:28 am

rough first trim, no sanding or clearcoating... they'll be a bank braking $45 shipped

Paralyzer · Post by **Paralyzer** » Sat Feb 17, 2007 2:29 am

looks good!

rice_eater · Post by **rice_eater** » Sat Feb 17, 2007 2:33 am

also, final versions will have the weave angled properly too, these were made out of scarp fiber as demos!!! they looked a bit odd in the pictures coz of that

hansken_yo · Post by **hansken_yo** » Sat Feb 17, 2007 2:50 am

those are nice

z3roneo · Post by **z3roneo** » Sat Feb 17, 2007 11:17 am

Put me down for some when they're ready... Are you gonna do the outside b pillars as well??

rice_eater · Post by **rice_eater** » Sat Feb 17, 2007 7:44 pm

yup, outside Bs for sure... i have to grab a couple glove box doors and arm rests for some customers, so i'll be hitting the j-yards this week and grabbing a set or two

z3roneo · Post by **z3roneo** » Sat Feb 17, 2007 7:46 pm

Sweet let us know when they're out... Cuz I'll buy all the b and c pillars..

04sxt2.0 · Post by **04sxt2.0** » Sat Feb 17, 2007 8:09 pm

hey rice eater how much are the carbon arm rest and the glove box's

rice_eater · Post by **rice_eater** » Sat Feb 17, 2007 8:20 pm

60 and 65, + cores unless you want to ship yours... i can make overlay versions for the door as well if you don't want to bother with cores, but that's entierly up to you

scneonchic · Post by **scneonchic** » Sat Feb 17, 2007 9:46 pm

wish you wouldve went into business before i bought all that cbd stuff i got

their stuff is good that i have, but im debating selling the door sills.

mztykal · Post by **mztykal** » Sat Feb 17, 2007 9:56 pm

I'm down for a set of B-Pillars (outside). LMK! Thanks!

glasswars · Post by **glasswars** » Sun Feb 18, 2007 12:23 am

FINALLY!!!!!!!!! NOW MAKE B PILLARS TOO!!!!!! PLEASE!!!!!!!!!!! I AM SO EXCITED!!!!!!!

JRM · Post by **JRM** » Sun Feb 18, 2007 12:26 am

Those are definitely on my list of things to buy from you.

NeonOn19s · Post by **NeonOn19s** » Sun Feb 18, 2007 1:09 am

I'm seriously intrested.... on the b, c and any interior parts...

playboy2k4 · Post by **playboy2k4** » Sun Feb 18, 2007 12:12 pm

You are off the freaking chain at this carbon fiber stuff. I'm going to be buying everything you supply for the interior when I get to it because thats where I want it. I have a different scheme for the outside that wouldn't look to good with carbon fiber but the inside would be perfect.

LowNSlow · Post by **LowNSlow** » Sun Feb 18, 2007 9:52 pm

No offense to you rice... but I've noticed a trend...

Everytime you make something new... you post pictures then say they are rough finishes... and that the pics are not cleared not sanded..

I'm just curious... not sure if I've seen any "final" pics..

Just my opinion.. I'd sand/clear them first.. then start advertising...

(again im not flaming just giving advice)

JRM · Post by **JRM** » Sun Feb 18, 2007 10:04 pm

Not the best picture but here is some stuff that he has made that I have picked up.

Good stuff imo

rice_eater · Post by **rice_eater** » Sun Feb 18, 2007 11:48 pm

LowNSlow wrote:No offense to you rice... but I've noticed a trend...

Everytime you make something new... you post pictures then say they are rough finishes... and that the pics are not cleared not sanded..

I'm just curious... not sure if I've seen any "final" pics..

Just my opinion.. I'd sand/clear them first.. then start advertising...

(again im not flaming just giving advice)

coz until they're finished it takes longer... i did that toilet seat close to 2 weeks ago now, and i havent got around to even trimming it because i'm working on other stuff more important... when clearcoated, the parts will look the same, except any crests or dips in the resin will have been sanded out... that's it...

in this case they were demos i made out of scrap fiber, so these Cs in the picture will never be installed... most likely they'll shop display pieces

Here are pics of FINISHED parts, from when i was using the previous resin... some NEW unfinished parts mixed in there as well..

playboy2k4 · Post by **playboy2k4** » Mon Feb 19, 2007 1:40 am

Cleeeeeeaaaaaannnnnnnn!!!!!!!! I LOVE THAT SHIT

azianmopar05 · Post by **azianmopar05** » Mon Feb 19, 2007 1:47 am

do you have any c/f center console(surrounding peace aroud the cd player and controls) peaces??

ragek23 · Post by **ragek23** » Mon Feb 19, 2007 2:33 am

rm868s
00 SRT SWAP w/ ATX- do u have an pics of those installed on your car?

Mr Josh Zombie · Post by **Mr Josh Zombie** » Mon Feb 19, 2007 9:53 am

so, whatever happened to the headliner group buy? and the package deal? and all the greatness?

Now I need to order outer dorr sills, inner pillars, headliner... STOP MAKING CRAP!!!!