Page 1 of 2

Firebird Tip Side Exit Exhaust??? Yay or Nay??

Posted: Sun Mar 11, 2007 8:33 pm
by z3roneo
Gotta a Firebird Tip from a friend today and we wanted to see how it would look as a side exit.... (excuse the roll of tape that's holding it up)

Image
Image
Image
Image
Image


If I do use this tip, I'm gonna notch the pinch weld just a bit so the tip sits flush to the r/t sides...

So whatcha peeps think?? Should I get'er done or look for another tip??

Posted: Sun Mar 11, 2007 8:39 pm
by 702Neon
not my cup of tea. plus all the exhaust dust is gonna end up on ur wheels.
________
Water bongs

Posted: Sun Mar 11, 2007 8:42 pm
by quicksilvr
I think the style and location looks great. Will the tip clean up any better than that though? Looks kinds corroded, but maybe it's just dirt. Anyway, I give it a :thumbup:

Posted: Sun Mar 11, 2007 8:42 pm
by GTS
Same here I really dont like how that looks I'd much rather have the dual out back with either twin tip off to one side or the two RT style ones.

Posted: Sun Mar 11, 2007 8:47 pm
by racer12306
looks good to me.

maybe do dual side exit, one on each side. might be too much though.

i dont think the carbon will be much of a problem because the entire car including the wheels are black.

:thumbright:

Posted: Sun Mar 11, 2007 8:53 pm
by scneonchic
I think it looks okay. But i like traditional rear setups better.

Posted: Sun Mar 11, 2007 9:01 pm
by flhmfd
i just bought piping to do this on mine. yours looks sweeter tho

Posted: Sun Mar 11, 2007 10:41 pm
by z3roneo
Hmmm... yea the tip will get cleaned up if i decide to use it or not.... not worried bout carbon... Like the side exit cuz it's pretty much the old school look...

I also like the dual slash tip on the side like so....
Image
Image

You guys will see when its all finished and painted...

Posted: Sun Mar 11, 2007 10:44 pm
by supertrick_05
^^Not diggin those tips at all...the Pontiac tips DO polish nice...I did that on my friend Brandon's Grand Prix...basically the same tips. I say go for it!

Posted: Sun Mar 11, 2007 11:02 pm
by TNK
i liek both ideas. but the firebird tip is my favored choice.

Posted: Mon Mar 12, 2007 12:16 am
by Paralyzer
not digging the tip, but also I never have digged a side exit exhaust on a sedan car....

Posted: Mon Mar 12, 2007 1:02 am
by hansken_yo
my thoughts are eh....but it is something that most people don't have and not over the top.

Posted: Mon Mar 12, 2007 1:07 am
by LaidNeon
:slap:

Posted: Mon Mar 12, 2007 3:32 am
by neonpla
racer12306 wrote:looks good to me.

maybe do dual side exit, one on each side. might be too much though.

i dont think the carbon will be much of a problem because the entire car including the wheels are black.

:thumbright:
the fuel lines run along the other side of the car, wouldnt be a good idea to run exhaust pipe over them, lol

Posted: Mon Mar 12, 2007 4:45 am
by OB
Unless it has a cutout to house the pipe, im not a fan of that style. I know, im one to talk, but I dont wanna cut my fascia up so I have an excuse haha. Non visible Dump pipe FTMFW.

Posted: Mon Mar 12, 2007 6:19 am
by welchspro
I like the tip, i say go for it

Posted: Mon Mar 12, 2007 10:14 am
by racer12306
neonpla wrote:
racer12306 wrote:looks good to me.

maybe do dual side exit, one on each side. might be too much though.

i dont think the carbon will be much of a problem because the entire car including the wheels are black.

:thumbright:
the fuel lines run along the other side of the car, wouldnt be a good idea to run exhaust pipe over them, lol
forgot about those pesky fuel lines.

maybe some heat wrap would keep the temps under control.

Posted: Mon Mar 12, 2007 10:24 am
by Mr Josh Zombie
Nay

I hate the looks of SEE on sedans

Posted: Mon Mar 12, 2007 12:08 pm
by z3roneo
damn.... no love peeps.... :cry:

if most you don't know.... I have a dump right now...

Image

Posted: Mon Mar 12, 2007 1:07 pm
by NeonOn19s
nay

Posted: Mon Mar 12, 2007 5:29 pm
by kevo
i like it, find another and go dual.

There is a guy with a ghetto'd up side exhaust on an srt in my area. You just have to learn to do it right.

Posted: Mon Mar 12, 2007 6:43 pm
by neon_ert3
i say yay!

Posted: Mon Mar 12, 2007 11:25 pm
by kc2005ptgt
meh - it has to be done right - I am not sure if that tip works.... I like the dual slashed cut ones, those look good.

Posted: Tue Mar 13, 2007 12:06 am
by TNK
i wnat side exit. but it woudl HAVE to be dual. had the design laid out in my head for the white car... but haven't put any thogth into it for the blue car... til now... :lol:

Posted: Tue Mar 13, 2007 12:57 am
by OB
z3roneo wrote:damn.... no love peeps.... :cry:

if most you don't know.... I have a dump right now...

Image
keep it that way! dump>all

Posted: Tue Mar 13, 2007 2:13 am
by outkast
i say do it i did and i love it thinking about changing my tip thoughImage

Posted: Tue Mar 13, 2007 8:03 am
by caustic neon
just doit ehh

Posted: Wed Mar 14, 2007 2:45 pm
by 00element10
i was thinking about doin something like this with my 1st gen. I think it looks awesome. But my car sits too low, and with 3" piping coming out from under the side of the car...i dont know if it would work too well..

anyways...i say go for it.

Posted: Wed Mar 14, 2007 5:43 pm
by neon2ner
i think it looks good man. it's your call in the end though. just make sure it's aligned right, if it's not it would definitely take away from the look. although i do like the dump too.

p.s, i see you're running the CLK style tails...did you have any fitment issues? do they fit nice and flush? i'm thinking about getting some for the R/T this summer to finish off the back end. thanks dude.

happy modding.

scott.

Posted: Wed Mar 14, 2007 6:22 pm
by MoxHair
Image

How 'bout no tips at all? lol