**Updated**Trunk Buildup is DONE!
Posted: Tue Aug 28, 2007 3:35 pm
Well guys it has been some time since I last posted a nice "long" thread. But I have been working on my Sub enclosure and I have been pressed on time due to the show this Saturday. I still have a lot to do before it is considered as "done" but I can only do what I can in the time I have. The enclosure is false floor setup where the floor is elevated a few inches and the tire well is used as space as well. Well here are some pictures of the progress and I will post more as we get to our deadline.
Bottom of Box elevating the false floor:
Seams filled with calk:
Fiberglass work:
test fit in car:
with 15" CVR sub sitting in it:
Decided to change the sub placement to inverted placement:
Bondo put onto enclosure which is where we stopped as of last night:
we are thinking of putting about 6 hours of work into it tonight which will get us either finished or close to being finished which can get done tomorrow. But I will keep you guys posted.
Just info for you guys:
Two amp racks will be flush mounted behind the wheelwells. The sloped down part to the sub will be white wrapped vinyl along with the dome on the back side of the sub. Everything else will be black carpet. I will have a white "M" for mopar in the very front in white vinyl. With 7 color LED's that match the flash pattern of my underbodies and my interior lights.
Updated pics:
We had issues with the heat not working with the contact cement, so the cotton backing fell off of the vinyl but we got it to work. We line the wheel wells with the carpet and got the amp rack made. Along with getting all the wiring done. We feel that will finish today and then just work on the presentatin looks. Here are the Pics:
Well we finished the box last night at about 2am. Still have lighting to do and change the wireing layout. But you get the idea of the layout now. This setup I have to say is crazy loud and I and going to keep it down on about half volume on my head unit. As soon as we turned it on last night and played for about 30 seconds the rearview mirror fell off.. I have to take out my rear deck speakers due to the sub providing so much pressure on the back side of the 6x9 speakers that they will blow in a couple of days. So on with the pics:
Bottom of Box elevating the false floor:
Seams filled with calk:
Fiberglass work:
test fit in car:
with 15" CVR sub sitting in it:
Decided to change the sub placement to inverted placement:
Bondo put onto enclosure which is where we stopped as of last night:
we are thinking of putting about 6 hours of work into it tonight which will get us either finished or close to being finished which can get done tomorrow. But I will keep you guys posted.
Just info for you guys:
Two amp racks will be flush mounted behind the wheelwells. The sloped down part to the sub will be white wrapped vinyl along with the dome on the back side of the sub. Everything else will be black carpet. I will have a white "M" for mopar in the very front in white vinyl. With 7 color LED's that match the flash pattern of my underbodies and my interior lights.
Updated pics:
We had issues with the heat not working with the contact cement, so the cotton backing fell off of the vinyl but we got it to work. We line the wheel wells with the carpet and got the amp rack made. Along with getting all the wiring done. We feel that will finish today and then just work on the presentatin looks. Here are the Pics:
Well we finished the box last night at about 2am. Still have lighting to do and change the wireing layout. But you get the idea of the layout now. This setup I have to say is crazy loud and I and going to keep it down on about half volume on my head unit. As soon as we turned it on last night and played for about 30 seconds the rearview mirror fell off.. I have to take out my rear deck speakers due to the sub providing so much pressure on the back side of the 6x9 speakers that they will blow in a couple of days. So on with the pics:
