Oh. I see what you did there.

LilSparkPlug · Post by **LilSparkPlug** » Tue Nov 11, 2008 8:23 pm

Its because you don't have the TIP sensor lines in. There is a little cap on the cold side intercooler pipe....a red line should go from the solenoid to that cap. There is a sensor in your driver's side fender.....its the TIP sensor, it needs to be plugged in and have a white vacuum line running from the solenoid to the sensor itself.

This is why that solenoid is essential, as is running proper colored lines. It makes diagnosing easier. The TIP sensor line not being hooked up means you are running off the factory wastegate...that has like a 4lb spring. You need to hook that up and see what happens.

Did the factory solenoid thing come with the car at all? If you look in the picture of my engine I posted, where the solenoid is mounted....the solenoid closest to you. On the very bottom you'll see three caps one right above the other. That is where the tip sensor lines should go on a factory setup.

You also need the rubber piece that goes on the cowl panel, that seals water off from dumping itself all over the motor during a wash, rain storm or whathaveyou. Oh and what wires are running into the engine bay from the passenger compartment? Are there gauges or an aftermarket radio?

Dude I wished I lived closer to you, I could help you out alot more.

Adionik · Post by **Adionik** » Tue Nov 11, 2008 10:43 pm

Damn...me and you are going to have to chat over PM or something because I have a zillion questions and you need to take pics of what you're talking about LMAO

Oh and

http://www.youtube.com/watch?v=QeBKxocstXI

contagious18 · Post by **contagious18** » Wed Nov 12, 2008 1:42 am

damn ur car sounds badass

INVUJerry · Post by **INVUJerry** » Wed Nov 12, 2008 4:16 pm

That sounds like my car's lope right now.

Danteneon · Post by **Danteneon** » Wed Nov 12, 2008 4:53 pm

This should help you get the lines back where they belong (providing the solenoids are still being used)

LilSparkPlug · Post by **LilSparkPlug** » Wed Nov 12, 2008 7:24 pm

Adionik, do you have AIM? I can definitely take pictures and everything/anything you need to help you get her running! No issues there!

Adionik · Post by **Adionik** » Wed Nov 12, 2008 7:54 pm

Yes, my AIM is Adionik.

Thank you so much, I will not be on till later I am going to work on the car.

LilSparkPlug · Post by **LilSparkPlug** » Wed Nov 12, 2008 8:08 pm

I added you, I'll catch you later on if I'm not in bed. Tomorrow I can take a shot of the factory vac lines on the solenoid.

Adionik · Post by **Adionik** » Wed Nov 12, 2008 11:47 pm

Well we found out what was wrong

100 150 150 150

After a boost leak test tomorrow she comes apart.

MyNeonSaysHi · Post by **MyNeonSaysHi** » Thu Nov 13, 2008 12:26 am

Gald the stock turbo isn't fubared. Since you got it so cheap, I would look into a big turbo kit for it to support those mods.

Very clean SRT.

Did you ever get that Mopar BOV installed? What kind of gasket did you use?

Are you going to sell the yellow one? Pretty badass to have two Neons and one SRT-4 at the ripe age of 19.

blue demon02 · Post by **blue demon02** » Thu Nov 13, 2008 12:32 am

LionheartedSXT · Post by **LionheartedSXT** » Thu Nov 13, 2008 12:36 am

Let's relax please...not an admin, but come on...If you want to address him do it in pm or sumthin instead of open boards where you actually have to get admins involved...just saying...

Adionik · Post by **Adionik** » Thu Nov 13, 2008 12:42 am

MyNeonSaysHi - Yes I did man, it goes off now and such. I used a gasket maker paper thingy with RTV on top. It has a good seal...i hope. Turbo is coming off anyone so i'll probably re-do it. We think one of the piston rings is fine. we had good compression all across the board except #1

Post by **racer12306** » Thu Nov 13, 2008 8:02 am

I for one am sick of the shit. I saw you post a comment, and he responded to it. I didn't realize that quote on the last page was from you.

Here is a plan: cut the shit, take it to PM's or AIM or somewhere so that I don't see it.

King Crab · Post by **King Crab** » Thu Nov 13, 2008 1:17 pm

Congratz on the SRT-4.

I'm sure once you get everything ironed out, you'll enjoy all the hard work that you've put into her.

Again, congratz!

contagious18 · Post by **contagious18** » Fri Nov 14, 2008 1:51 am

u lucky sob. i just cant accept that u got an srt