Purple Pirahna
Posted: Mon Jul 19, 2010 9:35 pm
My current fun Neon, 1997 Magenta base coupe, paid $600 for it 3 years ago:


Brand new 2.4L Mopar short block, rebuilt head with Crower springs, milled .040", Crane 18's (Crane 12's in picture), AEM 3-bolt cam gears with Jeff's spacers (added recently), AF/X long tube, 2.5" dynomax exhaust w/cutout under driver's seat, MS2, e85.



Lawn mower battery and custom tray I made:

Fun little car, first time at track with stock PCM, kirk header, and Crane 12's:
r/t: .246
60': 2.151
330': 6.141
1/8: 9.434 @ 75.46 mph
1000': 12.259
1/4: 14.665 @ 93.83
2nd time after putting in one of my Mopar PCMs, new suspension (struts and all bushings), and the AF/X header with the 2.5" exhaust I ran a best time of:
60' : 2.205
330' : 6.183
1/8: 9.467 @ 75.96
1000' : 12.259
1/4: 14.638 @ 94.93
Last month I installed my MS2 along with the Crane 18's, adjustable cam gears, installed 37# injectors and e85, and a no-90 intake. Took it to track 2 days after getting it running. Ran a few 14.5's @ 90 mph (gained a 10th, lost almost 5 mph) with 60' times of 2.0x on street tires. Datalog showed I was running 17:1 AFR at 3500 or so, and leaned out to 22:1 at redline. Injector duty cycles were as high as 210%!
Fuel pressure drops down to 20 psi from 49 psi as soon as pump turns off, and the stock pump in the car has around 200k-210k. Walbro 255 and 2nd gen 58 psi regulator. Just pulled the header off to move the wideband down to the collector from cylinder 4 runner.
Sleeper, until I open the cutout and you hear the lope real good
Probably selling the Crane 18's to my buddy for the black ACR we're putting together for him and picking up a set of Crower stage 4's. Shooting for mid-13's on street tires, full interior.


Brand new 2.4L Mopar short block, rebuilt head with Crower springs, milled .040", Crane 18's (Crane 12's in picture), AEM 3-bolt cam gears with Jeff's spacers (added recently), AF/X long tube, 2.5" dynomax exhaust w/cutout under driver's seat, MS2, e85.



Lawn mower battery and custom tray I made:

Fun little car, first time at track with stock PCM, kirk header, and Crane 12's:
r/t: .246
60': 2.151
330': 6.141
1/8: 9.434 @ 75.46 mph
1000': 12.259
1/4: 14.665 @ 93.83
2nd time after putting in one of my Mopar PCMs, new suspension (struts and all bushings), and the AF/X header with the 2.5" exhaust I ran a best time of:
60' : 2.205
330' : 6.183
1/8: 9.467 @ 75.96
1000' : 12.259
1/4: 14.638 @ 94.93
Last month I installed my MS2 along with the Crane 18's, adjustable cam gears, installed 37# injectors and e85, and a no-90 intake. Took it to track 2 days after getting it running. Ran a few 14.5's @ 90 mph (gained a 10th, lost almost 5 mph) with 60' times of 2.0x on street tires. Datalog showed I was running 17:1 AFR at 3500 or so, and leaned out to 22:1 at redline. Injector duty cycles were as high as 210%!
Fuel pressure drops down to 20 psi from 49 psi as soon as pump turns off, and the stock pump in the car has around 200k-210k. Walbro 255 and 2nd gen 58 psi regulator. Just pulled the header off to move the wideband down to the collector from cylinder 4 runner.
Sleeper, until I open the cutout and you hear the lope real good
Probably selling the Crane 18's to my buddy for the black ACR we're putting together for him and picking up a set of Crower stage 4's. Shooting for mid-13's on street tires, full interior.