Some pics on a nice day
Some pics on a nice day
It's been a while since I put up pics. I sold my gold rims and am using the snowflakes now. I can't stand rubber band wheels anymore.
Hood scoop wrapped in CF wrap I had laying around.
Messy engine bay. Most of the mess is from the HID wiring harness. I recently good NGK plugs, and new wires and coilpack, so I decided to paint the VC. I really need a mag intake in there to tie it all together. lol
Hood scoop wrapped in CF wrap I had laying around.
Messy engine bay. Most of the mess is from the HID wiring harness. I recently good NGK plugs, and new wires and coilpack, so I decided to paint the VC. I really need a mag intake in there to tie it all together. lol
- Haganracing
- 2GN Member
- Posts: 4169
- Joined: Tue Jan 30, 2007 11:23 pm
- Location: Mount Airy, Maryland
- Contact:
love it!
how hard was it for 03+ steerin wheel swap?
how hard was it for 03+ steerin wheel swap?
occasional demons wrote:So maybe a FuzzyDanteHagan sammich might just beat a FuzzyHagan.
Danteneon wrote:My advice is to fight those urges and enjoy the fact that you have both X and Y chromosomes. And an SRT. And your hand. You don't need a girl.
-
- Spam Avenger!
- Posts: 9003
- Joined: Wed Aug 02, 2006 2:49 am
- Location: Kokomo, IN
Chris, like Adam said, it's super easy. You should really go for it. The only hard part about it, is that if your steering wheel was never removed before, be prepared to use alot of strenght to pull your ~10 year old steering wheel off.
Adam, thanks mang. I really wish I could afford a real paint job, but I'm digging the flat blue color to be honest. haha.
David, Yeah, those are power window switches, and I think that location is great for them!
Adam, thanks mang. I really wish I could afford a real paint job, but I'm digging the flat blue color to be honest. haha.
David, Yeah, those are power window switches, and I think that location is great for them!
I'm not sure what it is, but I'm not digging the flakes on your car. Could be that they seem too tucked in compaired to your old wheels. Maybe if they were spaced out it would look better to me.
Magnum intake. Do it meow
If I could just figure out how to meld the Outback and the Neon into one car...
-
- 2011 Silver Contributor
- Posts: 4829
- Joined: Mon Jul 14, 2008 6:09 pm
- Location: Uniontown, Pennsylvania
- Haganracing
- 2GN Member
- Posts: 4169
- Joined: Tue Jan 30, 2007 11:23 pm
- Location: Mount Airy, Maryland
- Contact:
Ahh ok, I just freak out when I am messing with an airbag LOL
occasional demons wrote:So maybe a FuzzyDanteHagan sammich might just beat a FuzzyHagan.
Danteneon wrote:My advice is to fight those urges and enjoy the fact that you have both X and Y chromosomes. And an SRT. And your hand. You don't need a girl.
- DetergentCandy
- 2GN Member
- Posts: 1197
- Joined: Sun Sep 27, 2009 8:13 pm
- Location: Phoenix
1: Love the flat blue. Very unique. Beautiful shade.
2: Rear window switches look great. What system are you using? I've been wanting to install electric rear windows for a while...
3: Since I first saw your car, i've wanted to add a year lip to my 02 rear. Love the look.
2: Rear window switches look great. What system are you using? I've been wanting to install electric rear windows for a while...
3: Since I first saw your car, i've wanted to add a year lip to my 02 rear. Love the look.
02 Neon R/T(Blackula) - Old and busted
05 SRT-4(Serenity) - Sold
20th Anniversary Golf GTI - Sold
05 SRT-4 - New hotness
05 SRT-4(Serenity) - Sold
20th Anniversary Golf GTI - Sold
05 SRT-4 - New hotness
LilSparkPlug wrote:Mmmm beefy
Dante and Kyle, I also think so too. I might get spacers, but I think I might just get 16"s with 50 series tires somewhere down the road.
Detergent, thank you! I'm using a SPAL window kit. They sell them on ebay, and as well as here: Window Kit
And here are the switches that I used with it: Switches
And you should do the rear lip idea if you can't afford an SRT rear bumper like I can't. hahaha
Dan, as I said in the original post, those are HID wires. I might clean it up later, but I'm too lazy.
Detergent, thank you! I'm using a SPAL window kit. They sell them on ebay, and as well as here: Window Kit
And here are the switches that I used with it: Switches
And you should do the rear lip idea if you can't afford an SRT rear bumper like I can't. hahaha
Dan, as I said in the original post, those are HID wires. I might clean it up later, but I'm too lazy.
Ahhhhhhhh love it. Idk why I like it so much but I've always liked the look of your car. Maybe cause it just looks clean. When it comes to the engine bay.. yeah mine used to be messy too but then one day I cleaned it up & now it looks like I did a wire tuck whe I didn't. Lol. It also heled that I removed my cruise control so I don't got that box anyore and I plan to find a aftermarket coolant can to get rid of the stock one & make it look more cleaner.
Official "I'm Going to Drive My Neon till it Dies" Club #000048
-
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
- DroopDaddy408
- 2GN Member
- Posts: 609
- Joined: Wed Feb 11, 2009 2:53 pm
- Location: Tulare,Ca
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Looking good, but what do you have hooked to the Mustang TB inlet with the black elbow/tubing?
If that is the one that goes behind/under the brake booster, and was connected near the IAC? It needs to be connected to a vacuum source. Or you may get the random twice a year incorrect purge flow CEL/code. I finally plumbed mine back into the manifold vacuum, and haven't had the CEL come on since.
Oh, and nice TB BTW...
If that is the one that goes behind/under the brake booster, and was connected near the IAC? It needs to be connected to a vacuum source. Or you may get the random twice a year incorrect purge flow CEL/code. I finally plumbed mine back into the manifold vacuum, and haven't had the CEL come on since.
Oh, and nice TB BTW...
They did on the Lebaron GTS coupes, but then those didn't have rear doors.Midnight_Rider wrote:Your console is the bomb. DCX should have had rear window switches like that factory.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
But the convertibles did have power 1/4 windows. Just saying.occasional demons wrote:They did on the Lebaron GTS coupes, but then those didn't have rear doors.Midnight_Rider wrote:Your console is the bomb. DCX should have had rear window switches like that factory.
Last edited by Danteneon on Mon Apr 04, 2011 12:28 pm, edited 1 time in total.
If I could just figure out how to meld the Outback and the Neon into one car...