2GN.ORG

Posted: **Tue Oct 25, 2011 1:52 pm**

isn't that the normal steering wheel and airbag?

Posted: **Tue Oct 25, 2011 1:55 pm**

Dante has one in his ACR... I think it was from the Mexican market. PM him.

Posted: **Tue Oct 25, 2011 1:56 pm**

kevin, instead of an impression there's normally a badge there

Posted: **Tue Oct 25, 2011 1:56 pm**

Yep. It's the same one in my car.

It is a Mexican market non-airbag steering wheel cover.

Posted: **Tue Oct 25, 2011 2:01 pm**

it looks the one in my 2003 Stratus

Posted: **Tue Oct 25, 2011 2:05 pm**

Might explain why this SRT is in Mexico. Haha.

Posted: **Tue Oct 25, 2011 2:11 pm**

Yep

Posted: **Tue Oct 25, 2011 2:41 pm**

theColonel wrote:it looks the one in my 2003 Stratus

Yup.. I seen those and the one with the Chrysler badge at the jyards all the time..

Kinda cool..

Posted: **Tue Oct 25, 2011 2:52 pm**

is it possible to put that cover on a steering wheel with an air bag??

Posted: **Tue Oct 25, 2011 3:04 pm**

Nope. That cover dosn't have the mounting provisions nor the special breakaway in the material needed for an airbag.

Posted: **Tue Oct 25, 2011 10:58 pm**

this is an SRT of mexico, air bags were optional here, at a higher price

most of the neon in Mexico, do not have airbags, and no ABS

crazy no?

the only models available were airbags, LX, RT and SRT in all was an optional extra money.....

by the way .... is fun to drive on a track day without ABS

Posted: **Wed Oct 26, 2011 12:36 am**

iThane wrote:is it possible to put that cover on a steering wheel with an air bag??

Danteneon wrote:Nope. That cover dosn't have the mounting provisions nor the special breakaway in the material needed for an airbag.

That's too bad- it is much better looking than the airbag/badge ones we have. Of course, I wish that DCX had gone ahead with the Viper-inspired one that was on the 2003 SRT prototype (with the cruise, of course).

allpar.com wrote:

Posted: **Wed Oct 26, 2011 12:59 am**

http://www.allpar.com/neon/srt/srt-4-panel.jpg

WHOA!

Posted: **Thu Oct 27, 2011 10:51 am**

My Stratus R/T had that wheel although it did have an airbag in it.

Posted: **Thu Oct 27, 2011 10:53 am**

IIRC, the Stratus cover and the Neon cover were slightly different in shape near the spokes. Enough so that they didn't interchange, although I can't recall if anyone tried it or not.

Posted: **Thu Oct 27, 2011 11:30 am**

LilSparkPlug wrote:My Stratus R/T had that wheel although it did have an airbag in it.

I don't want to find out if my Stratus SE has the airbag in there

Posted: **Thu Oct 27, 2011 11:52 am**

Probably should've specified mine was a coupe. The 03-04 coupes look similar to the 03+ SRT-4 wheel and the SXT wheel only they're leather:

The 01/02 (also leather) reminds me of what you have Dante:

Posted: **Thu Oct 27, 2011 11:57 am**

The coupe wheel does look a lot like the pad I have.

Then again, mine doesn't have that pesky "SRS" logo either

Posted: **Thu Oct 27, 2011 12:35 pm**

Cause Chtear is fancy pants

Posted: **Thu Oct 27, 2011 12:42 pm**

More of a naughty girl. What, with her lack of federal mandated safety equipment and all

Posted: **Fri Oct 28, 2011 9:54 pm**

the stratus airbag will fit on the wheel. I have one I swapped a 2nd gen wheel in a 1st gen neon. while at the salvage yard that was the only airbag they had that was good and fit the wheel

Posted: **Sat Oct 29, 2011 7:26 am**

Excellent! Now we know. I was looking at the wheels in the junkyard one day saying to myself I really dig this and it looks like it would fit.

Posted: **Sat Oct 29, 2011 11:02 am**

aaviator1 wrote:the stratus airbag will fit on the wheel. I have one I swapped a 2nd gen wheel in a 1st gen neon. while at the salvage yard that was the only airbag they had that was good and fit the wheel

Exactly.. I played around with one last weekend and it bolted in fine but the edges kinda stuck out a bit..

2GN.ORG

Anyone ever seen this style airbag on a SRT?

Anyone ever seen this style airbag on a SRT?