cluster mod

alsey_seven · Post by **alsey_seven** » Sun Dec 16, 2012 8:43 pm

after a few month of not modding or doing anything to the car i decided to swap out lights and installed led.

I recalibrated the needles at they are near perfect 99.99 % on all gauges MPH is perfect thanks Danteneon. your how to helped alot

chris1211 · Post by **chris1211** » Sun Dec 16, 2012 9:58 pm

I like it

BlackRT? · Post by **BlackRT?** » Sun Dec 16, 2012 10:07 pm

damn white leds with the face scrapped? I like this alot

Jenni · Post by **Jenni** » Mon Dec 17, 2012 3:24 am

sweet!!

unleashedcc · Post by **unleashedcc** » Wed Dec 19, 2012 9:32 pm

How did u do it?

Paint thinner then u scraped the back off?

MyNeonSaysHi · Post by **MyNeonSaysHi** » Wed Dec 19, 2012 10:44 pm

Is that just the picture or are there "hot spots: on the 20, 80 and 5&8 on the tach? That would bother the hell out of me

Also the 200 degrees is so bright you can't see it
Does look good though! I want to do red

Jenni · Post by **Jenni** » Thu Dec 20, 2012 12:44 am

forgot to also scrape the gas symbol?

alsey_seven · Post by **alsey_seven** » Thu Dec 20, 2012 2:10 am

Jenni wrote:forgot to also scrape the gas symbol?

na wanted to leave it that way

unleashedcc wrote:How did u do it?

Paint thinner then u scraped the back off?

just wet sandpaper it off. i think it was 150 sand paper

unleashedcc · Post by **unleashedcc** » Sun Dec 23, 2012 2:32 pm

Did u have problems with the pointers after? My fuel n rpm are not moving. Did u have to glue the sheet back down?

alsey_seven · Post by **alsey_seven** » Sun Dec 23, 2012 4:22 pm

did you recalibrate the needles? i used two pieces of tape both side took a while to line it up to original spot

FormerlyREDRT_98 · Post by **FormerlyREDRT_98** » Sat Feb 02, 2013 3:11 pm

Want to do this myself, but would hate the hot spots