my new knob...

TNK · Post by **TNK** » Fri May 12, 2006 11:51 am

its a Tenzo R blue carbon fiber shift knob. i really like it. it fits nicely in the palm of my hand....

marakka · Post by **marakka** » Fri May 12, 2006 12:33 pm

My knob fits in the palm of my hand very nicely too. Gets a little slippery if I hold it for too long though.....

On a serious note.... is that real CF?

TNK · Post by **TNK** » Fri May 12, 2006 1:15 pm

they told me it was, and its got the true look, like it shimmers and shit in the light, and i figure, its Tenzo R, they make pretty reputable shit, so im guessing it is.

i need an STS though, i dont like the shaft showing so much out of the rubber.... ha ha ha ha the shaft beneath the knob is sticking out of the rubber....

grambo · Post by **grambo** » Fri May 12, 2006 2:32 pm

Man. I actually really like that shift-knob. Do they have red?and how much brother?

TNK · Post by **TNK** » Fri May 12, 2006 2:44 pm

yeah, they had red. it was kinda pricey.. i paid 45 buxx.....

OB · Post by OB » Fri May 12, 2006 2:47 pm

thats hot, its real CF i can tell. the fake shit is ghey. noice!

grambo · Post by **grambo** » Fri May 12, 2006 2:48 pm

thx TNK. I gotta' use my custom SRT knob for a while. I'd hate to do all that work and then just buy a new one. Plus I want a weighted one..

TNK · Post by **TNK** » Fri May 12, 2006 2:52 pm

i had the option to buy a weighted anodized tenzo r knob. came in red black and blue. another very nice piece. smae price too.

thanks OB!

dblsg · Post by **dblsg** » Fri May 12, 2006 3:13 pm

TNK wrote:hey dblsg.... i like your knob.

right back at ya

Nick Drake · Post by **Nick Drake** » Fri May 12, 2006 3:32 pm

looks awesome, a little crooked but awesome.

quicksilvr · Post by **quicksilvr** » Fri May 12, 2006 3:52 pm

TNK wrote:i need an STS though, i dont like the shaft showing so much out of the rubber....

Hehehe.

Seriously though, that's what hacksaws are for. Just cut an inch and a half off the shaft, and you'll be good to go. Unless you WANT to spend over a $100 on an sts....

OB · Post by OB » Fri May 12, 2006 4:11 pm

cutting the shaft actually does shorten the shift quite a bit, its a free mod, just dont F it up! im still wanting to get a shorter boot that grips the shaft insteal of my wrinkly ass stock one. my shaft is shortened and my knob is long so it causes the boot to crumple up. I used a hair tie to get it to not look like a small weenie in a big vag like yours TNK hahaha

.

03sxt · Post by **03sxt** » Fri May 12, 2006 5:31 pm

orangeblastsxt wrote:thats hot, its real CF i can tell. the fake shit is ghey. noice!

Yeah, look at his fuel door. He knows real from fake.

Sorry, I had to.

You know I love you, man.

scneonchic · Post by **scneonchic** » Fri May 12, 2006 7:38 pm

too bright of a blue for me...but it matches your car perfect

so therefore it looks great in your car !

dinetuner · Post by **dinetuner** » Fri May 12, 2006 8:09 pm

orangeblastsxt wrote:cutting the shaft actually does shorten the shift quite a bit, its a free mod, just dont F it up! im still wanting to get a shorter boot that grips the shaft insteal of my wrinkly ass stock one. my shaft is shortened and my knob is long so it causes the boot to crumple up. I used a hair tie to get it to not look like a small weenie in a big vag like yours TNK hahaha .

what happend to back in the day everyone wanted longer and thicker shafts.....now they wanna cut them with hacksaws

wats wrong with kids nowadays....

lilolneon · Post by **lilolneon** » Fri May 12, 2006 8:12 pm

now u just need a better shift boot

dblsg · Post by **dblsg** » Sat May 13, 2006 12:10 am

orangeblastsxt wrote: grips the shaft insteal of my wrinkly ass.

orangeblastsxt wrote: my shaft is shortened and my knob is long.

orangeblastsxt wrote: a small weenie in a big vagina like yours TNK .

lambostealth · Post by **lambostealth** » Sat May 13, 2006 12:50 am

TNK wrote:they told me it was, and its got the true look, like it shimmers and shit in the light, and i figure, its Tenzo R, they make pretty reputable shit, so im guessing it is.

i need an STS though, i dont like the shaft showing so much out of the rubber.... ha ha ha ha the shaft beneath the knob is sticking out of the rubber....

STS's aren't shorter, they are actually longer at the bttom between the actuating lever and the pivoting ball, go to B&M's website, it explains it in detail.

03sxt · Post by **03sxt** » Sat May 13, 2006 2:16 am

dblsg wrote:
orangeblastsxt wrote: grips the shaft insteal of my wrinkly ass.

orangeblastsxt wrote: my shaft is shortened and my knob is long.

orangeblastsxt wrote: a small weenie in a big vagina like yours TNK .

eVilcreations · Post by **eVilcreations** » Sat May 13, 2006 8:07 am

That shift knob looks REALLY good man......

just be aware that it is woven fiberglass, not carbon fiber.

You cannot dye carbon fiber any color, it is black, that's all it can be. There are Carbon Kevlar Hybrid weaves but then it would be black(carbon) and blue(dyed Kevlar) woven together.

None the less, it looks really good, and I'm sure it matches the eBlue very well.

Josh

03sxt · Post by **03sxt** » Sat May 13, 2006 8:08 am

EvilCreations wrote:just be aware that it is woven fiberglass, not carbon fiber.

You cannot dye carbon fiber any color, it is black, that's all it can be. There are Carbon Kevlar Hybrid weaves but then it would be black(carbon) and blue(dyed Kevlar) woven together.

That's some good shit to know, Josh. Good call!

Edit: WOOT! 4,000th post!

dinetuner · Post by **dinetuner** » Sat May 13, 2006 11:28 am

dblsg wrote:
orangeblastsxt wrote: grips the shaft insteal of my wrinkly ass.

orangeblastsxt wrote: my shaft is shortened and my knob is long.

orangeblastsxt wrote: a small weenie in a big vagina like yours TNK .

so does TNK have the small weenie or big vagina? and how does OB know?

LaidNeon · Post by **LaidNeon** » Sat May 13, 2006 12:20 pm

looks good, i like it

rice_eater · Post by **rice_eater** » Sat May 13, 2006 12:34 pm

a srt shift boot would fit nice... it's a lot more, shaft hugging

03sxt · Post by **03sxt** » Sat May 13, 2006 10:04 pm

rice_eater wrote:a srt shift boot would fit nice... it's a lot more, shaft hugging

Okay. We're no longer allowed to make posts about shifters and boots here at 2GN.org. Shit's getting way too weird.

TNK · Post by **TNK** » Sun May 14, 2006 12:28 am

i shortened my shaft so the rubber fits better around the knob.

i need to clean the car again... and thanks for the compliments guys and gal!

dinetuner · Post by **dinetuner** » Sun May 14, 2006 1:12 am

ooo a DIRTY shaft and knob...

LaidNeon · Post by **LaidNeon** » Sun May 14, 2006 2:44 am

i need to shorten my shaft so rubbers fit better, any ideas?

TNK · Post by **TNK** » Sun May 14, 2006 5:20 am

i hacksawed it. right above the cotter pin. or whatever you wanna call that little pin that holds the stock knob on

dinetuner · Post by **dinetuner** » Sun May 14, 2006 12:02 pm

CrucialNeon wrote:i need to shorten my shaft so rubbers fit better, any ideas?

quit using viagra