Page 5 of 16
Posted: Fri Jun 09, 2006 7:44 pm
by scneonchic
^dont you just have 2?
Posted: Fri Jun 09, 2006 11:01 pm
by dinetuner
rice_eater wrote:TNK wrote:are you gonna make any of those side marker and 3rd brake deletes? those would be hawt
yup... from making the bigger parts i end up with tons of various cloth chunks that i either keep, or throw away if they're too small, so that'd be perfect for small stuff like this.
i'm curious....
so far, the fit from the 3 A pillars i made isnt exactly perfect, because stock they fit in so close to the dash.... i was thinking of making full CF A-pillars so the fit would be flush, but that would take 3 layers, and obviously more work.... would you want to pay a little more for that or would it not be worth it? If you say NO dont worry, i'm thinking of ways around this and have a couple ideas that i'll be trying when i get back....
a little sand paper would fix that.. take the sand paper to the dash...
Posted: Sat Jun 10, 2006 2:27 pm
by rice_eater
teamliviD wrote:
I just want to buy these parts already
that's why i'm here kicking it in the sun and relaxing for a couple weeks, so i can dive head first into this when i come back
the last few months for me had been crazy busy, and doing this stuff on the side didnt help one bit... i really needed some time away from it all
dinetuner wrote:rice_eater wrote:
i'm curious....
so far, the fit from the 3 A pillars i made isnt exactly perfect, because stock they fit in so close to the dash.... i was thinking of making full CF A-pillars so the fit would be flush, but that would take 3 layers, and obviously more work.... would you want to pay a little more for that or would it not be worth it? If you say NO dont worry, i'm thinking of ways around this and have a couple ideas that i'll be trying when i get back....
a little sand paper would fix that.. take the sand paper to the dash...
hahaha, that was one of the options i was considering
but i find it very hard to tell people that they would have to do that in order to make them fit. i would definately have second thoughts about buying something like that, and i'm sure all of you work just as hard for your money as me, and would probably think the same way... dont worry, i'll have something good for you guys by the end... till then, hopefully i can keep you interested with other cool stuff
Posted: Tue Jun 20, 2006 10:31 pm
by rice_eater
UPDATE:
-made the first set of sidemarker deletes and they turned out great... right now i'm working on making molds in order to start true mass production of these suckers... INFO: 6layers fiberglass, 2 layers CF, 2-3 coats of clear gell... this makes them almost the exact width of the stockers, and therefor they fit flush on the bumper (aprox retail 40-50 shipped anywhere)
-finished making a fiberglass mold for the wrap around chin for the SRT front bumper (2 layers S2 fiberglass, one layer CF, aprox 125-150) .... will start work on a few sets for local SRT guys and then they'll be up for sale for the rest of the world... since i'm having a hard time getting more cf, i will make something almost identical to the kaminary lip out of S2 fiberglass, that people can paint... it'll cost more, but it'll be functional
http://www.modernperformance.com/dcx/ka ... t_lip5.jpg
-foglight surrounds >>starting work on them tonight as i have LOTS of requests locally, but will definately start making them, and they'll be aprox 60-70 shipped
-my clear resin and gel should arrive this week, so i will also work on finishing off the C pillar covers i started.... this means, one more layer of CF to the current layer, this time with clear epoxy and gel... i have about 8 sets (4 definately spoken for).... $100
NO NEW PICTURES UNTIL I HAVE FINISHED PRODUCTS... NEXT TIME YOU SEE A PICTURE, THE ITEM WILL BE FOR SALE
keep on looking, other updates to come
Posted: Tue Jun 20, 2006 11:34 pm
by rice_eater
i want to make a chin for the SX as well... ideas and designs are welcome
Posted: Tue Jun 20, 2006 11:35 pm
by MyNeonSaysHi
Wooooo!!!!!! Can't wait!
Posted: Wed Jun 21, 2006 2:49 am
by dinetuner
i meant before you start laying it...do some mathematics... i dont know how much your are adding but then sub tract that.. you know? then sand it off...lol if you know what i mean?
Posted: Wed Jun 21, 2006 3:25 am
by rice_eater
no need too... i'm making outer and inner molds for my big stuff like front chin, trunk replacement and fenders, so once done all i have to do is lay the fiber between them and squish the layers together.... there's no way that they wont fit perfect after that, as all the extra material will be on the inside, while on the outside it will line up perfect...
Posted: Wed Jun 21, 2006 11:52 am
by Canada
Make something similar to the "Aerospoiler" for the 03+ SX guys, and try to make sure it fits the SRT-D as well, I want an SRT-D fascia, but hate the lack of a lip...
Posted: Wed Jun 21, 2006 12:28 pm
by OB
man I REALLY want some CF window visors. I wish I knew someway of getting u something to mold after. theres no way u can come up with some w/o something to directly copy?
Posted: Wed Jun 21, 2006 12:37 pm
by rice_eater
i saw some of those fugly things on a neon a couple weeks back... not impressed at all
Posted: Wed Jun 21, 2006 12:41 pm
by OB
thats why i want custom ones that dont stick out 3". Just some almost flat ones. Theyre very functional as well, allowing the window to be opened while its raining (believe it or not, this is very beneficial IMO). Also, with the right design, they could have aero properties as well, allowing air to flow over the visors instead if being pulled into the open window, which we know to create a drag effect. just a few ideas.
Posted: Wed Jun 21, 2006 12:44 pm
by rice_eater
EclecticBlue wrote:Make something similar to the "Aerospoiler" for the 03+ SX guys, and try to make sure it fits the SRT-D as well, I want an SRT-D fascia, but hate the lack of a lip...
got a picture? i cant find one
Posted: Wed Jun 21, 2006 12:53 pm
by OB
http://cgi.ebay.com/ebaymotors/Dodge-Ne ... enameZWD1V
check that out, those actually look pretty cool and are much better looking than the thick ones.
Posted: Wed Jun 21, 2006 3:58 pm
by dinetuner
not a fan of those wind thingys... but i just thought of something do they have a spoiler for thetop of the rear window? kinda like a cavy lip spoiler? that would be cool i think... then again maybe not lol
Posted: Wed Jun 21, 2006 4:31 pm
by marakka
Posted: Wed Jun 21, 2006 5:06 pm
by dinetuner
hmmm there alright but not really my cup of tea... owelll
Posted: Thu Jun 22, 2006 12:04 am
by Canada
rice_eater wrote:EclecticBlue wrote:Make something similar to the "Aerospoiler" for the 03+ SX guys, and try to make sure it fits the SRT-D as well, I want an SRT-D fascia, but hate the lack of a lip...
got a picture? i cant find one
Picture of what? An SRT-D Fascia, or the Aerospoiler? Look in the Nedor/Group Buy area for the Spoiler...
Posted: Thu Jun 22, 2006 8:46 am
by SolarYNeon
n00b question:
Could you carbon wrap an srt hood for me ?
Im more than willing to pay for shipping to and from, but first off I just have to know if its possible.
Danke!
Posted: Thu Jun 22, 2006 9:32 am
by 2k2patriotblueneon
SolarYNeon wrote:n00b question:
Could you carbon wrap an srt hood for me ?
Im more than willing to pay for shipping to and from, but first off I just have to know if its possible.
Danke!
Yes, it would be possible.....but retarted.
Posted: Thu Jun 22, 2006 10:16 am
by SolarYNeon
2k2patriotblueneon wrote:SolarYNeon wrote:n00b question:
Could you carbon wrap an srt hood for me ?
Im more than willing to pay for shipping to and from, but first off I just have to know if its possible.
Danke!
Yes, it would be possible.....but retarted.
Yeah, but I'm just looking for whatevers cheaper
Have it repainted to my car color, or get it wrapped lol
Posted: Thu Jun 22, 2006 8:21 pm
by TNK
i want a rear window wing, like the instigator wing, or the other one that isnt sold nemore.... i beli9eve marakka has one. there was another SRT front lip, dunno who mkaes it, adn ive only seen 1 pic of it, that is much better lookign thatn the kaminari one.... you shoudl make one of those
Posted: Fri Jun 23, 2006 10:32 am
by rice_eater
EclecticBlue wrote:rice_eater wrote:EclecticBlue wrote:Make something similar to the "Aerospoiler" for the 03+ SX guys, and try to make sure it fits the SRT-D as well, I want an SRT-D fascia, but hate the lack of a lip...
got a picture? i cant find one
Picture of what? An SRT-D Fascia, or the Aerospoiler? Look in the Nedor/Group Buy area for the Spoiler...
found it... i dont know, i think i can do better than that
Posted: Fri Jun 23, 2006 2:27 pm
by Mopar00Neon
rice_eater wrote:2003silverneonsxt wrote:i said something bout it in another thread,, but i want a piece that might be someting like 1/4" mdf wrapped in cf on both sides, that i can mount in place of my soon roof glass, let me know if u can try this, pm me or respond here
i have though about it for a long time.... i wanna find a way to use the stock brackets without needing cores though, otherwise the actual skin of the roof glass is VERY easy to do; i'll have something for you by the end of summer
I was going to say this also. Ive mentioned a sunroof glass delete pannel for years now to everyone who has made CF peices. I like your idea of using stock mounting/frames without taking cores. Id be willing to pay $$ for one.
Though, if I happend to come across a core any time soon. I will buy it and send it to you for R&D and such.
Posted: Fri Jun 23, 2006 2:43 pm
by dinetuner
Mopar00Neon wrote:rice_eater wrote:2003silverneonsxt wrote:i said something bout it in another thread,, but i want a piece that might be someting like 1/4" mdf wrapped in cf on both sides, that i can mount in place of my soon roof glass, let me know if u can try this, pm me or respond here
i have though about it for a long time.... i wanna find a way to use the stock brackets without needing cores though, otherwise the actual skin of the roof glass is VERY easy to do; i'll have something for you by the end of summer
I was going to say this also. Ive mentioned a sunroof glass delete pannel for years now to everyone who has made CF peices. I like your idea of using stock mounting/frames without taking cores. Id be willing to pay $$ for one.
Though, if I happend to come across a core any time soon. I will buy it and send it to you for R&D and such.
http://forum.2gn.org/viewtopic.php?t=9098
Posted: Sun Jun 25, 2006 9:44 pm
by rice_eater
Posted: Sun Jun 25, 2006 9:51 pm
by 03sxt
Wow! That looks good!
Posted: Sun Jun 25, 2006 10:23 pm
by rice_eater
$200 canadian, or roughly $180 american, when done... i cant make them out of cf yet since there's such a shortage of it right now, but i've put in 2 large orders with 2 suppliers, so as soon as one comes through i'll be able to make them out of cf too, for about $300 canadian, which is roughly $260-270 US right now... i know that at the moment these trunks are mostly for draggers, and i know that only a few people here are at the point where 20lbs saved is a big thing for them, but i wanted more to let you know that cheap cf trunks, and even cheaper cf overlay skinns are actually in the near future, and have the potential to come out really good
Posted: Sun Jun 25, 2006 11:26 pm
by rice_eater
Posted: Mon Jun 26, 2006 8:04 am
by teamliviD
man that look way better than my shitty ass VIS trunk lid! I might just see what happens when you get the cf in! ive got a lot of money sitting here for you!
