2GN.ORG

Posted: **Thu May 21, 2009 6:42 pm**

TheRandom1 wrote:That's because you aren't cool enough to have lost explorers...

looking great!!!!

Corbeau FTW!!!!

Posted: **Thu May 21, 2009 10:10 pm**

love the seats, and hey, I say soda. It drives me crazy that my whole town is too lazy to say a two syllable word......

Posted: **Fri May 22, 2009 9:50 am**

Thanks guys...

They are getting nicer and nicer every day

They sit lower in the car so my knees don't hit the steering wheel AS much as before. Oh and actual back support is great.

Posted: **Fri May 22, 2009 10:06 am**

They look awesome man!

I wish I could find some SRT Viper seats for a reasonable price in good shape... I guess I'm dreaming.

Posted: **Fri May 22, 2009 11:28 am**

Nice seats!

Posted: **Sat May 23, 2009 3:33 am**

OMG I finally found the perfect adjustment and ooooooooooooooooooooooooooooooooooooooooooooooooooooh sooooooooooooooooooooooooo nice....

Driving is exciting again.

Posted: **Sat May 23, 2009 3:15 pm**

hansken_yo wrote:We throw tree huggers and hippies into ours...

hahaha troof right ther.

seats look great man,love the all black,not a fan of multi colored seats so yours looks fantastic

Posted: **Sat May 23, 2009 4:15 pm**

Seats look awesome ^^

Posted: **Mon May 25, 2009 3:55 pm**

the corbeaus look, amazazing.

Posted: **Tue Nov 10, 2009 2:32 pm**

Its been a while since I've done anything to/for Audry, but recently I've taken the first step towards a new and exciting long term project. The purchase of:

No, I'm not installing this hood on my car.

This hood is going to be the starting point for the plug I will be using in an attempt to create my own custom carbon fiber hood. I want some very specific things in a CFH that I can't seem to get or people won't make out there in the market. So I am going to attempt to do this myself (with help of course).

The Idea:
- I want to keep the car clean and questionably a sleeper. One thing the SRT hood does is draw too much attention with the hood scoop.
- I will be addressing the issue of the SRT hood and gappage on SXTs

That is the immediate goal.

Oh! Please, if you have information that will help me please DO!!!

I've looked in to trying a Silver Carbon Fiber, but my research has proven that to be very impractical due to fading, yellowing, or the time limitations of the resin needed for a quality job (5 mins to set a whole hood?? nah i don't think so).

So we are most likely going to be using regular black carbon fiber and are looking into paint alternatives that will show the carbon fiber but also appear silver, but that is a long way off and first we need to make the molds.

Hudson Neon was nice enough to let me use some photos to help conceptualize the hood which I think will be very clean

Standard SRT

Modified

Closer look:

Standard SRT

Modified

And again, this will be in CF because that is what I want.

I do not have a time table on this, and I still have a lot of research to do, so if you have information on HOW TO or Materials, SHARE THEM PLEASE.

Posted: **Tue Nov 10, 2009 2:36 pm**

Ohh, I like that idea John. That will look great!

I'm looking forward to your progress.

Posted: **Tue Nov 10, 2009 2:38 pm**

Awesome. I love the SRT bulge on the hood. It's gonna look tits.

Posted: **Tue Nov 10, 2009 2:44 pm**

This is gonna be a nice project! Finally something new and different!

I agree, the SRT bulge is nice, but the hood draws attention, and the stock hood is too flat / plain.

Maybe ask z3roneo about how to do this. He has worked on his fiberglass hood lots of times before.

Posted: **Tue Nov 10, 2009 2:54 pm**

so you are going to design a hood like this or are you going to take srt hoods and do this to them?

Posted: **Tue Nov 10, 2009 3:05 pm**

srtjesse wrote:so you are going to design a hood like this or are you going to take srt hoods and do this to them?

I'm using the SRT hood to help create the mold. I have to do some work to it to get the shape that I want, but it has the overall shape to start from.

So I'll be filling the hood scoop and smoothing it out towards the front and then I'll also be addressing the gap issues at the front (if any exist).

Posted: **Tue Nov 10, 2009 3:28 pm**

It'll exist. I've noticed a HUGE gap on 00-02 and still a prevelant gap on 03-05. I'm stoked to see this done. There were more chops of this somewhere...

Posted: **Tue Nov 10, 2009 3:34 pm**

If you're going to make this from scratch, then I'm guessing the end product will be a single piece of fiberglass instead of having those braces and support things on the underside of the hood.

And also, if you're making it, I'm sure you'll make the hood longer in the front to fill the gap.

Posted: **Tue Nov 10, 2009 3:50 pm**

There will be an outside mold and an inside mold for bracing. The bracing may be different from the SRT hood's bracing due to the lack of the scoop and some other ideas I may have that just haven't been planned out yet.

Posted: **Tue Nov 10, 2009 4:05 pm**

Yummy in my tummy. Can't wait to see progress on this.

Posted: **Tue Nov 10, 2009 4:38 pm**

heres a great web sight for materials. there shit is top notch alot of guys use it on srt forums

www.pyspeed.com

Posted: **Tue Nov 10, 2009 4:43 pm**

mattern248 wrote:heres a great web sight for materials. there shit is top notch alot of guys use it on srt forums

www.pyspeed.com

yeah, that isn't real carbon fiber that they are selling, but rather a fabric that resembles carbon fiber. Interesting though some of the things they have. Thanks!

Posted: **Tue Nov 10, 2009 5:31 pm**

yeah no prob i have another sight that sells actual cf fabrics but i cant seem to find it just at the moment but as soon as i do i will give it too you.

here it is
www.selectproducts.com
you have to go thru there catalog to find it but i was curtain they sold actual cf clothe.

Posted: **Tue Nov 10, 2009 5:38 pm**

In looking at my hood I have found that if the leading edge of the hood could be bent down slightly, it would eliminate the gap and match the 00-02 headlamp lines perfectly.

While it sounds simple enough, the area to be bent is where the extra bracing for the hood striker is. Just bending the outer most edge wouldn't be a smooth enough transistion IMO.

I have plenty of pics you can use as reference if you like.

Posted: **Tue Nov 10, 2009 7:52 pm**

My idea is someone needs to just make a CF SRT hood with the front edge lining up with 03+ neon bumpers. As far as I know it doesn't exist, and that's really odd to me.

Posted: **Tue Nov 10, 2009 9:12 pm**

sidepipe87 wrote:My idea is someone needs to just make a CF SRT hood with the front edge lining up with 03+ neon bumpers. As far as I know it doesn't exist, and that's really odd to me.

... maybe if i'm good at this ...

Posted: **Tue Nov 10, 2009 9:26 pm**

Wow, that's quite the project! Those seats are sweet; I missed em before.

Posted: **Sun Nov 22, 2009 11:27 pm**

gooing to look sweet

Posted: **Mon Nov 23, 2009 2:40 pm**

Very interesting. Never realized how big the bulge was on my hood. So the simple idea is to keep that bulge but no scoop?.. Very curious on how this turns out.

Posted: **Mon Nov 23, 2009 2:56 pm**

MyNeonSaysHi wrote:Very interesting. Never realized how big the bulge was on my hood. So the simple idea is to keep that bulge but no scoop?.. Very curious on how this turns out.

Yeah, that is the simple idea. Going to also do hidden/key'd hood pins and hydrolic lifts for the hood as well.

Got the exterior part figure out, but I'm also having to figure out the underside and proper bracing and ventilation. I want the bulge portion to be vented when it comes up to the firewall, but I'm not sure how I'm going to do that yet.

Found a decent forum that deals with composites and working them so I've found my place for research and development.

Posted: **Mon Nov 23, 2009 11:17 pm**

As this is a cool idea, I find it to be somewhat pointless for SRT-4 owners/swaps. As it restricts airflow for "cooling" purposes.

2GN.ORG

Hansken_Yo: Back to the drawing board... :(