Page 20 of 23
Posted: Wed Feb 04, 2009 9:24 am
by dbesade
Bumper Looks good although the Single Exit has never quite been my taste but if it suites you thats all that matters.
-Dave
Posted: Wed Feb 04, 2009 3:05 pm
by contagious18
i hate u but congrats
Posted: Mon Feb 16, 2009 4:01 pm
by yellowpatrol
Update
Installing the BFMIC right now.
Posted: Mon Feb 16, 2009 11:30 pm
by MyNeonSaysHi
Nice! You get a aftermarket crash bar or not? Polish up the endtanks?
Posted: Mon Feb 16, 2009 11:32 pm
by yellowpatrol
No crash bar yet, but I still might get one. No polishing. I got tired of messing with it so it's not done yet. I got all but the hot side hose.
Posted: Mon Feb 16, 2009 11:45 pm
by MyNeonSaysHi
Nice, no JDM tilt right? Let me know if you notice any difference. You are on stock boost like me right?
Posted: Mon Feb 16, 2009 11:49 pm
by INVUJerry
If I had an SRT, that's the exhaust I'd run. Maybe if I ever swap my 05, I'll run one.
Posted: Thu Feb 19, 2009 1:17 pm
by yellowpatrol
SRT is still under the knife for the BFMIC install, I decided to do the BOV at the same time so I only have to mess with IC piping once, but I didn't realize I don't yet have a short ram intake, block off plate, catch can, or crash bar. Or the tools to install the BOV to the hard pipe.
So if anyone local has some ring pliers, sealant, and a 10mm ratcheting wrench and wants to lend a hand that would be super.

Posted: Fri Feb 20, 2009 11:25 am
by yellowpatrol
I've been thinking of taking advantage of the fact that the block hasn't been bored correctly, and sleeving it, but I can't find anyone who has done this is the past for reference. Any reason why it wouldn't work?
Posted: Sat Feb 21, 2009 2:34 pm
by yellowpatrol
I bought a Bwoody catch can and a Weapon short ram intake.
Posted: Sat Feb 21, 2009 5:09 pm
by LilSparkPlug
Your sig makes me dizzy. If I were you I'd buy a 10mm racheting wrench....SRTs love them.
Posted: Sat Feb 21, 2009 5:19 pm
by yellowpatrol
LilSparkPlug wrote:Your sig makes me dizzy. If I were you I'd buy a 10mm racheting wrench....SRTs love them.
Oh true- I remember there was something I needed that for... but what was it?.... Something on the turbo....
Posted: Sat Feb 21, 2009 7:46 pm
by MyNeonSaysHi
yellowpatrol wrote:LilSparkPlug wrote:Your sig makes me dizzy. If I were you I'd buy a 10mm racheting wrench....SRTs love them.
Oh true- I remember there was something I needed that for... but what was it?.... Something on the turbo....
surge valve
Posted: Sat Feb 21, 2009 7:52 pm
by MoxHair
just about everything on the SRT can be taken apart with a 10mm ratcheting wrench.
Posted: Sat Feb 21, 2009 7:58 pm
by yellowpatrol
MoxHair wrote:just about everything on the SRT can be taken apart with a 10mm ratcheting wrench.
lol true true, but Stephen got it right, I was thinking back to when I was wanting to install the block off plate.
Posted: Sat Feb 21, 2009 8:04 pm
by acr2002
good choice on the exhaust, did you get a catted or catless dp?
Posted: Sat Feb 21, 2009 8:06 pm
by yellowpatrol
acr2002 wrote:good choice on the exhaust, did you get a catted or catless dp?
catted
Posted: Sun Feb 22, 2009 12:16 am
by welchspro
bah....bahbahbah i want an srt, garrrrrrr
Posted: Tue Feb 24, 2009 12:31 pm
by yellowpatrol
Finally got the hose situation sorted out last night. Soapy water helped a lot. I re-used the OEM hose clamps on the hot side as opposed to the wider ones that MPx sent because I couldn't tuck the wide ones up in there. I am keeping them for down the road when I do the swap though. I figure I'll have some more stuff out of the way so I should be able to get them on easier.
BOV is in the flange and the uppipe is installed too. I still have to do the lines, short ram intake and block off plate, but I don't have the last 2 yet. Pics of the stuff will follow shortly.
Still unemployed...... so money sucks right now. I've applied at no less than 15 places and nothing yet. Today I'm going to walk around the shopping centers with a stack of resumes so cross your fingers for me please.
With all of the free time I had a chance to clean up my garage and organize it, check it out:

Posted: Sat Feb 28, 2009 12:36 pm
by yellowpatrol
Damn, no comments on how clean my garage is?

I worked hard.
Oh well, I enjoy it and
they say that is all that matters
I made some progress- not on the car though. I got the rest of my makeshift wall up so you can no longer see the insulation! W00t.
Oh, I received my SRI, it's a Weapon-R, as well as my Bwoody catch can. I'm still waiting for the block off plate, and then I can sew this car back shut. I've got a little something special planned in the way of grill inserts to protect the BFMIC from rocks and bugs..... you'll see

Posted: Sat Feb 28, 2009 12:50 pm
by glasswars
do you live alone?
Posted: Sat Feb 28, 2009 12:52 pm
by yellowpatrol
glasswars wrote:do you live alone?
Why, you want to move in?
No I live with my GF and our dogs.
There is an extra bed room though if you want

Posted: Sat Feb 28, 2009 12:53 pm
by NeonOn19s
The garage looks good. I hope that you find a job. ... If you want you can help me out on organizing mine.

Posted: Sat Feb 28, 2009 1:04 pm
by glasswars
yellowpatrol wrote:glasswars wrote:do you live alone?
Why, you want to move in?
No I live with my GF and our dogs.
There is an extra bed room though if you want

pics of gf first

Posted: Sat Feb 28, 2009 1:08 pm
by yellowpatrol
haha she'd kill me if I posted anything
Posted: Sat Feb 28, 2009 1:47 pm
by NeonOn19s
awwww
Posted: Sat Feb 28, 2009 5:33 pm
by Speeder
yellowpatrol wrote:glasswars wrote:do you live alone?
Why, you want to move in?
No I live with my GF and our dogs.
There is an extra bed room though if you want

i hate livin' in an apt

Posted: Sun Mar 01, 2009 12:00 am
by MyNeonSaysHi
Great picts man, garage looks great.
Weather sucked balls today, I take it Nsyder came by and helped you out?
Hope you get a job soon man! If you need a job as is, UPS will take yah in!

Posted: Sun Mar 01, 2009 8:17 am
by yellowpatrol
MyNeonSaysHi wrote:Great picts man, garage looks great.
Weather sucked balls today, I take it Nsyder came by and helped you out?
Hope you get a job soon man! If you need a job as is, UPS will take yah in!

No he didn't come and I don't blame him. I couldn't even get out of my driveway due to like 5 inches of snow. I'll check out UPS though, thanks man.
Posted: Sun Mar 01, 2009 8:19 am
by LilSparkPlug
I'm envious of your garage, while we have one here I can't park in it. All it needs now....is a lift
