(_SxXxT_) 7/15/13. The car runs
sorry if I'm junking up your log but since I started the whole thing about the di-noc I think I should post a pic. First time using the stuff and WOW where have I been! SOOO fun to work with. I'm gona try and clear coat it to see how it looks since this is just a test piece. THANKS for sharing and turning me on to this stuff!!!!
- Custom or Nuthin -
-My SRT4 swap project log-
viewtopic.php?p=923967#923967
-My 2nd gen progress log-
viewtopic.php?t=52665&highlight=
-My 1st gen project log-
http://forums.neons.org/viewtopic.php?f ... 7#p3090897
-My SRT4 swap project log-
viewtopic.php?p=923967#923967
-My 2nd gen progress log-
viewtopic.php?t=52665&highlight=
-My 1st gen project log-
http://forums.neons.org/viewtopic.php?f ... 7#p3090897
wow man that looks really good, thats actually what im doing with my bezel... my bezel gets touched more then ne thing else in the car and im gonna cover it so it doesnt get scratched ne more.. as for clear coating it your going to need to scuff it. to were its dual or has a haz over it.. so the clear coat or w/e u put over it will stick.. also make sure the corners are down nice and secure cuz u dont want them to come up with the clear coat on cuz it will start to peel...
-
- 2GN Member
- Posts: 4137
- Joined: Sat Mar 22, 2008 1:56 am
- Location: Cumberland R.I.
its a perfect place for them.....
got couple things in the mail finally
got my bushing kit, its black when i wanted red but it took so long to get so idc bout the color ne more.... nd also go my hvac over lay from wiggy,,, its wrong color so i have to send back....have to wrap my hvac b4 i can put the over lay on ne ways
got couple things in the mail finally
got my bushing kit, its black when i wanted red but it took so long to get so idc bout the color ne more.... nd also go my hvac over lay from wiggy,,, its wrong color so i have to send back....have to wrap my hvac b4 i can put the over lay on ne ways
sweet! This is what I should have done. I don't like how my tv sits so low..... I'm guessing yours is a double din unit? How hard was it to move the heater controls? was the wiring long enough?
- Custom or Nuthin -
-My SRT4 swap project log-
viewtopic.php?p=923967#923967
-My 2nd gen progress log-
viewtopic.php?t=52665&highlight=
-My 1st gen project log-
http://forums.neons.org/viewtopic.php?f ... 7#p3090897
-My SRT4 swap project log-
viewtopic.php?p=923967#923967
-My 2nd gen progress log-
viewtopic.php?t=52665&highlight=
-My 1st gen project log-
http://forums.neons.org/viewtopic.php?f ... 7#p3090897
-
- 2GN Member
- Posts: 1006
- Joined: Mon Oct 13, 2008 8:19 pm
- Location: Akron oh
get rid of the beads!
- Custom or Nuthin -
-My SRT4 swap project log-
viewtopic.php?p=923967#923967
-My 2nd gen progress log-
viewtopic.php?t=52665&highlight=
-My 1st gen project log-
http://forums.neons.org/viewtopic.php?f ... 7#p3090897
-My SRT4 swap project log-
viewtopic.php?p=923967#923967
-My 2nd gen progress log-
viewtopic.php?t=52665&highlight=
-My 1st gen project log-
http://forums.neons.org/viewtopic.php?f ... 7#p3090897
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
ok here are some updates not much.. but some
first off im working on a spare decklid that i have... i welded the spoiler holes third braklight and key hole... once i finish body work im gonna paint it and install on my car. im gonna take off my decklid and repair all imperfections and then re-enstall and once i take this one off im going to sell it so if anyone intrested in a complete shaved decklid pm me.
also used my gf camera for interior pictures
BEST interior shot
first off im working on a spare decklid that i have... i welded the spoiler holes third braklight and key hole... once i finish body work im gonna paint it and install on my car. im gonna take off my decklid and repair all imperfections and then re-enstall and once i take this one off im going to sell it so if anyone intrested in a complete shaved decklid pm me.
also used my gf camera for interior pictures
BEST interior shot
-
- 2GN Member
- Posts: 1006
- Joined: Mon Oct 13, 2008 8:19 pm
- Location: Akron oh
lookin good, I've just started shaving my trunk too but am molding in a PVO spoiler
- Custom or Nuthin -
-My SRT4 swap project log-
viewtopic.php?p=923967#923967
-My 2nd gen progress log-
viewtopic.php?t=52665&highlight=
-My 1st gen project log-
http://forums.neons.org/viewtopic.php?f ... 7#p3090897
-My SRT4 swap project log-
viewtopic.php?p=923967#923967
-My 2nd gen progress log-
viewtopic.php?t=52665&highlight=
-My 1st gen project log-
http://forums.neons.org/viewtopic.php?f ... 7#p3090897
hahah, cant wait to see the picture... xbrandonx
ok the other day i noticed i needed some air in my front left tire.. today it was low.. so i inspected it and when i lifted the car up i noticed that the same issue superdan had i have.. and i guess mine has been like this long enough for my right tire to wear down a lot.. i make a 30 45 min drive a lot for work so i have to fix this problem asap so the tire stops balding and i also need to figure why im loosing air slowly..
ok the other day i noticed i needed some air in my front left tire.. today it was low.. so i inspected it and when i lifted the car up i noticed that the same issue superdan had i have.. and i guess mine has been like this long enough for my right tire to wear down a lot.. i make a 30 45 min drive a lot for work so i have to fix this problem asap so the tire stops balding and i also need to figure why im loosing air slowly..
well figured out what my suspension issue was...
and now for pictures
ordered a new intake cuz mine was BAD and old
since my intake was so bad i decided to protect it with stainless piece i made.
this piece is to protect the filter from water from tire and salt and debree... didnt take me long to make and made it to fit perfect....
and now for pictures
ordered a new intake cuz mine was BAD and old
since my intake was so bad i decided to protect it with stainless piece i made.
this piece is to protect the filter from water from tire and salt and debree... didnt take me long to make and made it to fit perfect....
/\ LOL SWEET I just made something like that to protect my filter also... slightly different design. I'l post pics tomorrow.
- Custom or Nuthin -
-My SRT4 swap project log-
viewtopic.php?p=923967#923967
-My 2nd gen progress log-
viewtopic.php?t=52665&highlight=
-My 1st gen project log-
http://forums.neons.org/viewtopic.php?f ... 7#p3090897
-My SRT4 swap project log-
viewtopic.php?p=923967#923967
-My 2nd gen progress log-
viewtopic.php?t=52665&highlight=
-My 1st gen project log-
http://forums.neons.org/viewtopic.php?f ... 7#p3090897