2GN.ORG

When are you going to throw that mag VC on there? Are you painting/powdercoating it first?

Yea I am painting it. And I am doing the design and color the same way for the valve cover as on the injector cover. I have already started the mag cover but I messed up a little bit, so I am just waiting to get some free time so I can sand some of it down and then I can repaint it again...

So far, so good

Ummm...you really need this though...

Part #4891410AB...MSRP $19.95 (hint-H.O. injector cover )

^^^ lol Idk I felt weird putting a High output one on there being that I don't have a mag head or for that matter any components that make up an r/t besides the IM. That is why I chose that injector cover.

Ah, gotya. Well I can't fault you there. The IM does look good sitting there though!

Thanks man! I would consider doing it again, on someone elses car

Ahh its good being back from school and having a good break. So since I am home I decided to give my car a really good wash and wax since I haven't done it in a while. So here are some shots of my car in the driveway.









And here is a close-up of the rear discs that I promised!

Looks good man. Glad to see the rear disc on, did you have any issues at all??? Keep it up car looks clean.

Hey thanks man. The only issue I believe we came across during the install was putting the new ebrake cables in. We forgot to put something through that gear shaped looking thing on the ebrake to make sure that the cable can reach the clip thing that holds the cables if you know what I am talking about. But other than that everything was straight-forward.

Where did you source the parts for the rear disc convertion

This is a definite mod you should all do if you haven't already. I saw this done on OB's neon so I decided to try it. It is the TB wire relocation, where you just tuck the wires under the IM. It makes the engine bay look a lot cleaner and it is super easy, just some food for thought if your looking for some easy mod to do if your bored, I personally think it looks ten times better


Speeder- I actually got them from a guy on ebay. He lived close enough for me to come pick them up. He claimed for them to have 28,000 or so miles on the parts. They were the entire rear suspension assembly from and srt. I just had the rotors machined and cleaned up all the other parts.

clean car man.. white FTW!

Thanks Sullivan!

i like the painted IM it dress up the otherwise black engine bay

Thanks, since the stock color on the IM was a dull silver, I wanted it to stand out a little more so I used some enamel paint. I have a couple more stuff to dress up the engine bay, such as a magnum valve cover that I will be painting the same color as the fuel injector cover, just have to find some time to do it.

Good call on the throttle cable relocate. I did that to mine as well. Not only does it look so much better, it removes that last bend before the TB. The straighter the path, the smoother the cable will move

Thanks Dante, yea that bend was bothering me every time I opened up the hood. And on top of that that stupid clip that holds it on the radiator hose and the fact that it was rubbing and removing the paint on my brand new IM. So that definitely had to get taken care of. But thanks again for the props!

Try having the cable run across the manifold from the factory. My manifold runner had a groove in it from the cable

Damn, that really sucks! The outside part protecting the cable started wearing away before any serious blemishes could be seen on the IM...Thank goodness

Speaking of manifolds, when will you get yours finished?? I'm still waiting to be dazzled

Check out my latest post in my project log

Latest Update:

Here is one of my latest projects coming up. Mag valve cover from ZeroChad and AGP solid MM. I am not finished with the valve cover yet, as I will have it color matched to the injector cover that you can view on the previous page.


As for the other upcoming projects that may be going into effect are the valve cover of course, and with that I will be eliminating the vac line going to the intake and placing a breather on the VC and capping off the intake. But my next project is a retrofit. That will go down as soon as I get the money for it. I will be using E46 bmw projectors with the D2s HID kit. Also I am considering test fitting the stock srt intercooler on the car just to have it done.

Why did you paint the bushing on the solid mounts? They pop right out. Or did you tape them or put something on them that I just can't see? They'll look really sweet once you get them in the car, but if you didn't tape the bushing off, it will flake on you

Retrofits rock

I actually did not know that I figured they were in there solid lol. Yea I did paint them, oh well. Is it still possible to take them out still so I can I just chip off some of the paint so it won't flake?

What kind of retrofits are you doing lsp?

Well its all good now, I took the bushings out and chipped off the paint. I might just spray the mounts themselves one more time cuz I chipped some paint off them while I was removing the bushings...

Lookin good dude! I do suggest you get the CLK tails...they would look SOOOO good on your car! Not a big fan of those current ones.

Thanks! I couldn't find the ones that you are talking about but I personally did these tails because they are different not a lot of people have them or like them, but I personally favor them over the others.

Had a lil fun last nite in otown. Met up with dbesade.

Cars side to side


Dave showin off lol


Front end shots with turns sigs on


Car's back to back, this one is fresh


And bottom shot, showing the body design

nice pic

I want this project up and moving again! All the way on page 5 lmfao.


I love white neons. I want this one to do big things!

lol I hate you. bumping it up from the grave, i'm not ready yet hahaha. Only update I got is I'm waiting for a new radiator