2GN.ORG

more tubbing on the pass side.



stance will be aquired

Yes fuggin yum. I need some five spokes.

God damn yes. 2 3mm spacers up front, 2 5mm out back?

yummness.

oh god just that pic looks sexy man

glasswars wrote:God damn yes. 2 3mm spacers up front, 2 5mm out back?

2x 5mm in front, 3mm in back until i get extended studs for the rear.

those are gunna look hott! what do you think about some rota slips in a +20 15x8 on my 1gen.. Would i have to run a ton of camber to pull them off? I was thinking a 195 tire get a little stretch action need some advise from dirty low boys

i think that would be perfect. i am running a 195 45 on a 7" wheel and it has a slight stretch. you are going to have to pull the fenders if you want to turn, just rolling left me able to turn the wheel 1/4 of a turn.

my wheels are 16x7 42mm offset. with spacers they are 32mm front and 39mm rear. the rears can be pushed out probably almost 1/2 an inch with a good fender pull.

BlackRT? wrote:those are gunna look hott! what do you think about some rota slips in a +20 15x8 on my 1gen.. Would i have to run a ton of camber to pull them off? I was thinking a 195 tire get a little stretch action need some advise from dirty low boys

Run a 195/50/15 tire with them. You will probably need some camber, but not too retarded.

well the wheel setup is on and im having some issues with clearance in the rear. The inner lip of the wheel is rubbing the tension strut.

Can i add some more camber to correct the problem, or will this do anything at all? I already have a 3mm spacer on and from what i hear you can't go larger on stock studs.

You can go larger on stock studs just fine. I ran 8 or 10MM spacers with slicks on stock studs.

well problem solved. I had to run 5mm spacers in the rear and 10mm in the front.

Pictures?

not yet

im making you guys wait for quality pictures tomorrow.

Dam. The rims look sick in the teaser pic above.

Need moar content.

It's tomorrow.

Not in CA. :/

PISS.

hybrid-Srt2001 wrote:i think that would be perfect. i am running a 195 45 on a 7" wheel and it has a slight stretch. you are going to have to pull the fenders if you want to turn, just rolling left me able to turn the wheel 1/4 of a turn.

my wheels are 16x7 42mm offset. with spacers they are 32mm front and 39mm rear. the rears can be pushed out probably almost 1/2 an inch with a good fender pull.

from what i was reading i need to order those offset trailing arms from Vitor to get a 8inch wide rim to clear can anyone confirm?

dude moar pictars of wheels on car please that looks so effin hot

BlackRT? wrote:

hybrid-Srt2001 wrote:i think that would be perfect. i am running a 195 45 on a 7" wheel and it has a slight stretch. you are going to have to pull the fenders if you want to turn, just rolling left me able to turn the wheel 1/4 of a turn.

my wheels are 16x7 42mm offset. with spacers they are 32mm front and 39mm rear. the rears can be pushed out probably almost 1/2 an inch with a good fender pull.

from what i was reading i need to order those offset trailing arms from Vitor to get a 8inch wide rim to clear can anyone confirm?

Depends on the back spacing really. With the offset you're looking at, you'll probably be fine, since it has more back spacing than stock.

1010tires.com has a good offset calculator. as long as it isn't too much further inward than stock you should be fine. I think with the 20mm offset they should clear.

took some pictures today, then things went south, i hit a manhole cover while trying to get a rolling shot. The car needs a new k frame, pass control arm, and some fender work.

anyway on to the pictures

Fucking delicious. Get those fenders squared away and obviously the shit that got bent and beat to shit today. :):)

doin work son. only reason its not fixed right now is cause the junkyard was already closed lol.

Lol word. Don't change those wheels dude. I never realized how sex those wheels were until now. Keep em black. Or sell them to me. Rofl.

yeah they have grown on me. I think the offset and stretch made them look this sick. rear needs more spacers.

I thought they were gonna be white? Looks great regardless.


Sucks bout the damage tho.

they were, i had issues with the red powder from the last coating bleeding through so they went black.