Erebuni rear lip is on woot woot

INVUJerry · Post by **INVUJerry** » Fri Apr 27, 2012 10:03 pm

I think I would have done coilovers before a cage. Just my thought.

dtjackten · Post by **dtjackten** » Fri Apr 27, 2012 10:10 pm

also. . you may as well pull that back seat out..... with the design of the cage... no one is going to fit..

everything looks good though!

NeonNick925 · Post by **NeonNick925** » Fri Apr 27, 2012 10:54 pm

dtjackten wrote: also. . you may as well pull that back seat out..... with the design of the cage... no one is going to fit..

everything looks good though!

I just put the backseats back in to quite the interior exhaust note. And yes I need c/o's hecka bad. Got the cage first because the deal was to sweet to pass up.

I want to get NRG CF fixed back seats and coilovers.

dtjackten · Post by **dtjackten** » Sat Apr 28, 2012 10:41 am

ahh. i agree with installing the seat to quiet exhaust.... lol... hence why my car has a back seat again.

NEON PARABOLA · Post by **NEON PARABOLA** » Sat Apr 28, 2012 10:49 am

want your car......looks awesome man

NeonNick925 · Post by **NeonNick925** » Sun Apr 29, 2012 8:39 pm

NEON PARABOLA wrote:want your car......looks awesome man

thanks man!

NeonNick925 · Post by **NeonNick925** » Sun May 06, 2012 2:10 pm

got the rollbar mount for the GoPro. played with it today. Need to adjust the angle so you can see out the winshield. dont mind the baller PJ's

http://www.youtube.com/watch?v=8uySj7KD ... ature=plcp

NeonNick925 · Post by **NeonNick925** » Tue May 15, 2012 6:31 pm

Ordered new raccoon headlights last week,should be here tomorrow. Also ordered a mpx coilpack heat shield

NeonNick925 · Post by **NeonNick925** » Thu Jun 21, 2012 8:37 pm

Raccoons arrived and installed

MPX Coilpack sheild installed

Catch Can

Carbon Fiber Cluster Surround installed.

folding side mirrors will be here tomorrow

ordering my Chrysler grill and Euro tails tomorrow

FAC3L3SS · Post by **FAC3L3SS** » Thu Jun 21, 2012 9:05 pm

What happened to your carbon fiber-ed grey Neon? That fucker was titties.

NeonNick925 · Post by **NeonNick925** » Thu Jun 21, 2012 10:02 pm

It's sitting on the front lawn lol. Need to figure out what I fucked up on it. Either exhaust valve broken/bent or piston rings blew. My 16yr old neice is gettin that car in about 6 months. I'll take my CF fenders off,other then thatshe get it as it sits. Only has 62,xxx on it.

NeonNick925 · Post by **NeonNick925** » Wed Jun 27, 2012 4:06 pm

Got some goodies over the past week

score a SRT rear bumper that is color matched to my grey Neon so ima put it on there and take the black SRT bumper n possibly put it on the purple one. Folding side mirrors are @ the bodyshop getting the folding section color matched to the car. Picking up a set of SRT rear brakes for the grey neon on friday. Got SRT pedal covers for the purple neon but need to grind down brake & clutch pedal to fit and need 2 grab a SRT gas pedal...didnt know they were different

Waitin on Chrysler grill and Euro Tails to come in. Also have a stock TB coming Thanks 2 Caraudioholic24!! the spring on mine is weak and very finicky.

there reason i said i might use the SRT rear bumper is im gonna be usin the Euro Tails

,so gonna see if the bodyshop can heat the bumper n mold it to fit like stock with the 00-02 style tails....im sure they can,just not sure if its in my budget lo

NeonNick925 · Post by **NeonNick925** » Sat Jun 30, 2012 9:19 pm

Speaking of the CF'ed Grey Neon...

Got a SRT rear bumper for it that is dam near color matched...off by a shade and the metallics dont match 100% but for 100 bucks im HAPPY

Also picked up a SRT rear brake swap for it.

Picture of the Rear Bumper installed

Will look better when theres rotors behind the wheels lol

Picture of the Brake swap,also scored a SRT shift boot for it too

==============================================================

Put the Black SRT rear bumper from the grey neon on the purple one...

Also put the CF fuel door...Waitin on the Euro tails to come in. gonna take them 2 the body shop and see what theyre gonna charge to make it happen

While i was stripping parts from the SRT i snagged the pedal for the purple neon

Need 2 cut off about 1/4inch on the brake pedal to get the cover to fit right.i already did the clutch pedal,that was time consuming without a cutoff wheel

so ill be swing by harbor freight for one to finish the job lol...

NeonNick925 · Post by **NeonNick925** » Sun Jul 01, 2012 10:30 pm

My niece came over today to install the SRT rear brakes on her car...

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Still needs some work. Need to get a rear hub assembly for the driver side. Put new pads on,need to a parking brake rebuild kit.
I'm borrowin the tail lights that's why there MIA lol.
Next weekend we'll try to get the front brakes/knuckle swapped.

NeonNick925 · Post by **NeonNick925** » Mon Jul 02, 2012 10:48 pm

Well I'll be pickin up a srt4 motor in a month off the same car the bumper n brakes came from. Has 80k on it. Will still need IC & piping,ecu. Gonna order the the timing kit from MP since I'm not sure if it's been done. Will still be a long while til it gets dropped into a car but the ball is rolling in th right direction folks

speed127 · Post by **speed127** » Tue Jul 03, 2012 6:35 am

looking good!

NeonNick925 · Post by **NeonNick925** » Thu Jul 05, 2012 6:22 pm

Got the chrysler grill and euro tails in the mail today

Got the grill in. Needs a lol tlc but looks better then a big empty gap

Gotta til I get some time an money to take the the tails to the bodyshop n see what they can do about molding the srt rear to them.

NeonNick925 · Post by **NeonNick925** » Sat Jul 07, 2012 6:15 pm

the car with the folding side mirror finally painted to match

the car with the new(to me) Rota JMags 16in

The SRT hood is off and at the body shop being painted to match

======================================================

UPDATE on the grey car...

my niece pulled the front brakes off the donor SRT yesterday aswell as both the passenger side doors. Today she put the doors on...

gtownv6 · Post by **gtownv6** » Sun Jul 08, 2012 4:16 am

if they can't get the srt bumper to work with the tails would you be interested in trading it for an 01 rt bumper with factory cutouts?

NeonNick925 · Post by **NeonNick925** » Sun Jul 08, 2012 5:04 am

I'll keep you updated as to if they can or not. Hopin to kno by Monday night

FAC3L3SS · Post by **FAC3L3SS** » Sun Jul 08, 2012 9:03 am

Gosh holy fuck jmags ftw

2003se559 · Post by **2003se559** » Sun Jul 08, 2012 3:04 pm

This car is getting upgrades daily lol good job bro are u planing on going to OBs meet? How about u hand over some cf parts bro

NeonNick925 · Post by **NeonNick925** » Sun Jul 08, 2012 8:58 pm

Didn't know Derek was having a meet. Will have to see if Sean(hybrid-srt2001) knows the details on it. And I'm working on have the fenders recleared,they need I'm bad.

rammer78 · Post by **rammer78** » Sun Jul 08, 2012 9:24 pm

where did u get ur cf fenders at?

2003se559 · Post by **2003se559** » Sun Jul 08, 2012 9:28 pm

Derek does an annual BBQ is around October if I remember correctly and u should sell me the fenders and let me worry about clearing them

rammer78 · Post by **rammer78** » Sun Jul 08, 2012 9:30 pm

haha i would go but im not driveing across the us for a bbq

NeonNick925 · Post by **NeonNick925** » Sun Jul 08, 2012 11:11 pm

@rammer78 - I got the fenders from www.importfan.com back in 04'. They're a c-west prototype. I will never part with them.

@2003se559 - I will never sell the fenders theyre 1 of 10 sets. Oct huh? I should beable to make it. That's during our slow season @ work. I'll have to try to find a thread to follow to see what date. Thanks for the heads up

rammer78 · Post by **rammer78** » Sun Jul 08, 2012 11:15 pm

thanks man ill go ck it out

NeonNick925 · Post by **NeonNick925** » Sat Jul 21, 2012 2:06 pm

Bodyshop is taking a lil longer then expected with the hood but went & talk to them yesterday and check the hood out. It had been backed into by trailer hitch(that's how I got it) so they had to do some bodywork on it and sand it from my rattle can job :/ It'll be ready Monday

when I go to pick the hood up he wants me to bring the euro tails with me so he can get a better idea of what I want and give me a better guesstimate. Just bought a set of R/T side skirts today from a23dranger

will be takin them to the bodyshop ASAP 2 be painted.

Made a payment on SRT4 motor yesterday. Will have it paid off outta the next check

just got a srt ecu & bracket, aswell as 03+ body harness. Making progress,slowly but steadily.

NeonNick925 · Post by **NeonNick925** » Tue Jul 24, 2012 6:24 pm