germany: where all the neons will maybe go
looking better and better!
http://www.sevenstepsofdenial.com"If god hates masturbation that much, he should give me a girlfriend"
https://www.facebook.com/7StepsOfDenial
Official "I'm Going to Drive My Neon till it's too expensive to keep driving" Club #000083
Though she´s got not one wheel back on the road I got my next toy today - essential part for autostick mod
Should direct fit, has been sold out of a neon...
Anyone any suggestions belonging the wiring ?
I checked out the diagram and think at least the shift up and down-cables are one thing, the wiring at the ignition another.
Should direct fit, has been sold out of a neon...
Anyone any suggestions belonging the wiring ?
I checked out the diagram and think at least the shift up and down-cables are one thing, the wiring at the ignition another.
Unfortunatelly the engine has not yet been installed - but nethertheless I got some new toys for future installation
cruise-control-kit >2003
Sidemarkers smoke
Camshaftsensor x2
Auto-dimming rearview-mirror 300C.
The mounting should fit directly but the plug is different and it has no reading-lamps.
cruise-control-kit >2003
Sidemarkers smoke
Camshaftsensor x2
Auto-dimming rearview-mirror 300C.
The mounting should fit directly but the plug is different and it has no reading-lamps.
nice build looks good but where did you find that shifter bezel i have ben looking for one for the longest time with no luck i want the silver one tho
2004 white dodge neon 2.4 DOHC swapped
2004 red dodge neon srt-4 gone
2000 flat black plymouth neon 2.0 DOHC swapped gone
2002 silver dodge neon parts car R.I.P
2000 green dodge neon parts car R.I.P
Found it on ebay here called as original Neon - I will see.
Here are some to get out of PT Cruisers - it is said, they should fit with a little work on them.
http://cgi.ebay.de/Chrysler-PT-Cruiser- ... 20b2d47b66
If you need some assistance ...
***
Intermediately the engine is getting its new timing belt
Here are some to get out of PT Cruisers - it is said, they should fit with a little work on them.
http://cgi.ebay.de/Chrysler-PT-Cruiser- ... 20b2d47b66
If you need some assistance ...
***
Intermediately the engine is getting its new timing belt
sweet man thanks here in the states they have a similar one that comes on the pt cruiser gt on the newer ones but they are hard to come across
2004 white dodge neon 2.4 DOHC swapped
2004 red dodge neon srt-4 gone
2000 flat black plymouth neon 2.0 DOHC swapped gone
2002 silver dodge neon parts car R.I.P
2000 green dodge neon parts car R.I.P
- Forest Green 2k
- 2GN Member
- Posts: 760
- Joined: Sun Feb 14, 2010 8:56 pm
- Location: Buffalo, NY
yeah - I do hope that I could get it functioning at the end.
Today I spent with disassembling a rear left knuckle and control arm at the junkyard for a buddy and by the way ripped off the ABS-wiring from rear to front.
Back home I have been rewiring the cabletree at the SXT.
Hopefully it won´t last too long now to get the engine running again soon.
As soon as everything is in stock condition and still working I begin modding her
Today I spent with disassembling a rear left knuckle and control arm at the junkyard for a buddy and by the way ripped off the ABS-wiring from rear to front.
Back home I have been rewiring the cabletree at the SXT.
Hopefully it won´t last too long now to get the engine running again soon.
As soon as everything is in stock condition and still working I begin modding her
progress today
fixed some rust at the a-pillar and looked where to install the wiring for the additonal side turnlights
installed the BUX-fenders with the side turnlights - pretty cool if you have a Bux-Cabletree with the needed wires
and noticed that the plug for horn1 is the same as for the side turnlights
it really is - if somelike to let his horn "blink"
headlight and crashbar
have to adjust hodd, fenders and headlights next time
if someone likes to know how the third brakelight is mounted
Next time I really solder the turnlight-wires.
Nice to take a ride in the garden
fixed some rust at the a-pillar and looked where to install the wiring for the additonal side turnlights
installed the BUX-fenders with the side turnlights - pretty cool if you have a Bux-Cabletree with the needed wires
and noticed that the plug for horn1 is the same as for the side turnlights
it really is - if somelike to let his horn "blink"
headlight and crashbar
have to adjust hodd, fenders and headlights next time
if someone likes to know how the third brakelight is mounted
Next time I really solder the turnlight-wires.
Nice to take a ride in the garden
Last edited by Gnuserup on Sat May 28, 2011 2:58 pm, edited 1 time in total.
Have installed the rearfoglight and moved the reverselight to an ugly cube temporarily for having space for the rear turn-signals.
Today I spent with changing the control arm bushings.
Not really nice to do the work on the street, but it works
even if the bushings fall out by themselves.
But never thought the control arms could be as rusty as the were...
Else I have been collecting a kicker subwoofer and a SRT-leather-steering wheel for putting them on next time
Not an U.F.O.
but a steering wheel
Today I spent with changing the control arm bushings.
Not really nice to do the work on the street, but it works
even if the bushings fall out by themselves.
But never thought the control arms could be as rusty as the were...
Else I have been collecting a kicker subwoofer and a SRT-leather-steering wheel for putting them on next time
Not an U.F.O.
but a steering wheel
Latest work has been the installing of cruise control kit and the leather steering wheel ...
viewtopic.php?p=867439#867439
viewtopic.php?p=867439#867439
damn looks good i like the autostick how is that conversion?? is that an option down there?
2003 neon se crashed
1998 neon highline Sold
2005 neon sxtSold
2017 Volkswagen CC Rline Exec. 2.0t
"Sorry you are so scared of a possible mechanical problem that you will drive an ugly transportation appliance. I'll keep living a colorful life." -some guy about a camry
Yes - it has been an option on the latest sold Neons here about 2003. Like some guys on this forum had done this mod and if I studied the wiring manual correctly it should not be the biggest problem. The TCM (Plug C3) has on PIN 26 the downshift signal, on 27 the upshift.
If I am not absolutely wrong it could be possible to get the autostick-function without the stick itself, but maybe with a switch at the steering wheel like the cruise control switch on the <03s
If I anytime had finished this mod I will post some pictures for sure.
If I am not absolutely wrong it could be possible to get the autostick-function without the stick itself, but maybe with a switch at the steering wheel like the cruise control switch on the <03s
If I anytime had finished this mod I will post some pictures for sure.
wait so all of the auto trans' after 03 had the capability to be autostick????!!!
2003 neon se crashed
1998 neon highline Sold
2005 neon sxtSold
2017 Volkswagen CC Rline Exec. 2.0t
"Sorry you are so scared of a possible mechanical problem that you will drive an ugly transportation appliance. I'll keep living a colorful life." -some guy about a camry
I think all electronically controlled tranys should - so the 40TE and 41TE. On the NGC the TCM is included in the PCM and you´ll find the PINs for the up- and downshift there, but don´t really know if that will be directly working.
Unfortunatelly I only have a servicemanual incl. wiring for the 2000 and for 2002. The 2002 is just for NGC and the 2000 is for the 31TH so I don´t know whether the seperated TCMs on the 2001 41TEs will have that PINS or not.
Maybe anyone else have a wiring for those ?
Unfortunatelly I only have a servicemanual incl. wiring for the 2000 and for 2002. The 2002 is just for NGC and the 2000 is for the 31TH so I don´t know whether the seperated TCMs on the 2001 41TEs will have that PINS or not.
Maybe anyone else have a wiring for those ?
-
- Spam Avenger!
- Posts: 9003
- Joined: Wed Aug 02, 2006 2:49 am
- Location: Kokomo, IN
Slightly off-topic but the build sheet for my '02 SXT had a space that said "Autostick" but it wasn't highlighted. I would assume that it would have been an option for all BUX 2GNs.blueneo03 wrote:wait so all of the auto trans' after 03 had the capability to be autostick????!!!
Official "I'm Going To Drive My Neon 'til It Dies" Club #10
Have been lucky to have had test drive plates for the last two days and got her to the inspecting authority with them for finishing the approval process. It seems that it would last only a few more days and I will get regular license plates for her
Cruise control works fine, but I have been a bit confused first that the cluster only would show "cruise" and not "set" if it is set as my 2000 does. But anyway.
SRT leather steering wheel feels fine and the really next thing to fix seems to be the front discs/pads as I have a terrible jiggle while braking and less but noticable while accelerating.
If this is fixed and I got a few miles back for my invest so far, I will get on the autostick-thing.
Cruise control works fine, but I have been a bit confused first that the cluster only would show "cruise" and not "set" if it is set as my 2000 does. But anyway.
SRT leather steering wheel feels fine and the really next thing to fix seems to be the front discs/pads as I have a terrible jiggle while braking and less but noticable while accelerating.
If this is fixed and I got a few miles back for my invest so far, I will get on the autostick-thing.
-
- Supporting Vendor
- Posts: 3324
- Joined: Fri Dec 09, 2005 3:40 pm
Paddle shifters... I'm having all kinds of naughty ideas right about now.Gnuserup wrote:Yes - it has been an option on the latest sold Neons here about 2003. Like some guys on this forum had done this mod and if I studied the wiring manual correctly it should not be the biggest problem. The TCM (Plug C3) has on PIN 26 the downshift signal, on 27 the upshift.
If I am not absolutely wrong it could be possible to get the autostick-function without the stick itself, but maybe with a switch at the steering wheel like the cruise control switch on the <03s
If I anytime had finished this mod I will post some pictures for sure.
ASP - First NGC SOHC in the 13s and the 12s. First SOHC neon over 500whp. First NGC Neon on MS.
Winston Churchill wrote:Yes, Madam, I am drunk, but in the morning I shall be sober and you will still be ugly.
- Forest Green 2k
- 2GN Member
- Posts: 760
- Joined: Sun Feb 14, 2010 8:56 pm
- Location: Buffalo, NY
Thanks guys
Yeah, almost every second day I see one or two (except my own ).
A few years ago the people where looking quit more than today - had my first 2nd-gen 2002 and this time the neon had been more rare than today. But maybe with this silver machine and its for german cars unusual rear plate I´ll get more views
Now it´s time to take care about the autostick soon.
According to the wiring diagramma it should be a thing of that 4 wires only- red/wt from ignition key pos.2 to the shifter, black for ground from there and two more to the pcm/tcm for up- and downshift from the shifter. OK - the shifter itself.
Hope that the bad joggle while breaking will disappear with my new front brake kit, which has to get installed very soon now, too
And if that all is finished and working properly, I hope, that I could get the ABS installed next year.
Have some smoked sidemarkers and clk-style taillights laying around, which I plan to get on anytime anyhow.
Yeah, almost every second day I see one or two (except my own ).
A few years ago the people where looking quit more than today - had my first 2nd-gen 2002 and this time the neon had been more rare than today. But maybe with this silver machine and its for german cars unusual rear plate I´ll get more views
Now it´s time to take care about the autostick soon.
According to the wiring diagramma it should be a thing of that 4 wires only- red/wt from ignition key pos.2 to the shifter, black for ground from there and two more to the pcm/tcm for up- and downshift from the shifter. OK - the shifter itself.
Hope that the bad joggle while breaking will disappear with my new front brake kit, which has to get installed very soon now, too
And if that all is finished and working properly, I hope, that I could get the ABS installed next year.
Have some smoked sidemarkers and clk-style taillights laying around, which I plan to get on anytime anyhow.
-
- 2GN Member
- Posts: 154
- Joined: Thu May 19, 2011 12:09 pm
- Location: West Branch, Michigan