srtjesse DOHC 2gn part 2: ol' blackie is gone :(
srtjesse DOHC 2gn part 2: ol' blackie is gone :(
fist of all im a still alive lol and well its ben a year since i did the DOHC swap on my car.
and all i gotta say is. that its ben running like a champ couldn't be happier.
just a quick rundown for the people that dont know what i did to the engine.
DOHC head on stock sohc block all stock minus aem true time adjustable cam gears seat a 0,0, 2.4 oem exhaust manifold, stock r/t muffler, and getto 3.0 intake tube.
I havent had any issues with the car other than little wiring bugs that im still working out. since i last updated my old project log i have done a couple things to the car
i got done.
1. bux tails and chrysler grille from marcel
2. tokico blues with goldline springs
3. map reading light rear view mirror.
4. trunk lid carpet
5. 1gn manual trunk release.
6. lsp led dome light, led lic plate light, led cubby hole light, led third brake light and im as we speak getting some custom 00 led tails done by her.
7. acr radio delete panel.
8. relocated my alpine head unit to were the cd changer goes.
9. air bag delete tray.
10. chrysler steering wheel air bag.
11. full eibach suspension bushing kit.
12. power folding mirrors
things i have planed for this year are.
1. swap in the new to me transmission mine has no third lol
2. get my srt clutch converted to work with the 2.0 trans.
3. get megasquirt.
4. 60mm mpx throttle body.
5. make custom cold air intake.
6. get mpx under drive pulley.
7. get a side exit exhaust.
8. get my avs molded.
9. get body work done.
10. get some coons retrofit them and tint the turns on them amber.
11. get wheels.
12. do 1gn strut conversion.
13. do rear disk conversion.
14. get all new wiring for a mtx i am using atx wiring and im having some issues.
here is a link to my old project log for reference ill post updated pictures later thanks for looking
viewtopic.php?t=42645&highlight=srtjesse+dohc
and all i gotta say is. that its ben running like a champ couldn't be happier.
just a quick rundown for the people that dont know what i did to the engine.
DOHC head on stock sohc block all stock minus aem true time adjustable cam gears seat a 0,0, 2.4 oem exhaust manifold, stock r/t muffler, and getto 3.0 intake tube.
I havent had any issues with the car other than little wiring bugs that im still working out. since i last updated my old project log i have done a couple things to the car
i got done.
1. bux tails and chrysler grille from marcel
2. tokico blues with goldline springs
3. map reading light rear view mirror.
4. trunk lid carpet
5. 1gn manual trunk release.
6. lsp led dome light, led lic plate light, led cubby hole light, led third brake light and im as we speak getting some custom 00 led tails done by her.
7. acr radio delete panel.
8. relocated my alpine head unit to were the cd changer goes.
9. air bag delete tray.
10. chrysler steering wheel air bag.
11. full eibach suspension bushing kit.
12. power folding mirrors
things i have planed for this year are.
1. swap in the new to me transmission mine has no third lol
2. get my srt clutch converted to work with the 2.0 trans.
3. get megasquirt.
4. 60mm mpx throttle body.
5. make custom cold air intake.
6. get mpx under drive pulley.
7. get a side exit exhaust.
8. get my avs molded.
9. get body work done.
10. get some coons retrofit them and tint the turns on them amber.
11. get wheels.
12. do 1gn strut conversion.
13. do rear disk conversion.
14. get all new wiring for a mtx i am using atx wiring and im having some issues.
here is a link to my old project log for reference ill post updated pictures later thanks for looking
viewtopic.php?t=42645&highlight=srtjesse+dohc
Last edited by srtjesse on Tue Dec 06, 2011 2:54 am, edited 7 times in total.
2004 white dodge neon 2.4 DOHC swapped
2004 red dodge neon srt-4 gone
2000 flat black plymouth neon 2.0 DOHC swapped gone
2002 silver dodge neon parts car R.I.P
2000 green dodge neon parts car R.I.P
here are the pictures sorry they are cell phone quality i need to get a camera hope you guys like them
these are before the bux tails and grille
these are after the bux tails and grille
these are before the bux tails and grille
these are after the bux tails and grille
2004 white dodge neon 2.4 DOHC swapped
2004 red dodge neon srt-4 gone
2000 flat black plymouth neon 2.0 DOHC swapped gone
2002 silver dodge neon parts car R.I.P
2000 green dodge neon parts car R.I.P
I dig the flat black, looks like a decent pai.t job. looks badass. and you can run an MTX on an ATX ECU and wiring, i did it on my 00
Modify Your Car - Modify Your Body - Modify Your Life
TheRandom1 wrote:My true opinion here is that the only time rubber should be stretched is when it's going over a penis.
ntyvirus1: yes and no i almost got some rota ikr 17x9 25et but im going to keep my eyes open to see if i find something else i like
smiley: thanks i need to redo it its starting to look sun beat
tink: yeah everything is the same the only difference is the clutch switch you have to figure out what wire to ground lol for some weird reason if i turn on my air the car will start but only if i dont press the clutch cus if i do it wont start lol so i wanna get new wiring from a mtx just to get rid of the electrical bugs i have
smiley: thanks i need to redo it its starting to look sun beat
tink: yeah everything is the same the only difference is the clutch switch you have to figure out what wire to ground lol for some weird reason if i turn on my air the car will start but only if i dont press the clutch cus if i do it wont start lol so i wanna get new wiring from a mtx just to get rid of the electrical bugs i have
2004 white dodge neon 2.4 DOHC swapped
2004 red dodge neon srt-4 gone
2000 flat black plymouth neon 2.0 DOHC swapped gone
2002 silver dodge neon parts car R.I.P
2000 green dodge neon parts car R.I.P
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
save your money and get it repainted salsa red instead of repainting it flat black... would look soo much better.
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus
it only cost me 15 bucks to spray it lol but yeah im debating salsa red or prowler orange?? only time will tell lol
2004 white dodge neon 2.4 DOHC swapped
2004 red dodge neon srt-4 gone
2000 flat black plymouth neon 2.0 DOHC swapped gone
2002 silver dodge neon parts car R.I.P
2000 green dodge neon parts car R.I.P
- Haganracing
- 2GN Member
- Posts: 4168
- Joined: Tue Jan 30, 2007 11:23 pm
- Location: Mount Airy, Maryland
- Contact:
If you do orange, it might take away from your euro tail lights look.
occasional demons wrote:So maybe a FuzzyDanteHagan sammich might just beat a FuzzyHagan.
Danteneon wrote:My advice is to fight those urges and enjoy the fact that you have both X and Y chromosomes. And an SRT. And your hand. You don't need a girl.
Do it with vinyl like window tint, don't spray em.srtjesse wrote:you are going to say that im super crazy but im going to super lightly tint them
So many neons so little time.
https://www.youtube.com/user/invujerry/videos
www.instagram.com/invujerry
- ThrIsNoSpork
- 2GN Member
- Posts: 700
- Joined: Fri Oct 12, 2007 10:04 am
- Location: Antioch, CA
-
- 2GN Member
- Posts: 1659
- Joined: Sat Jun 19, 2004 1:38 pm
- Location: EL Laaaay, CA.
I used spray tint on just the amber portion of one of my sets of export tails. *shrugs*
(pics are old, pre-export rear bumper, pre- a lot of things. I currently have stock exports in the car, these tinted ones are boxed up in storage.)
(pics are old, pre-export rear bumper, pre- a lot of things. I currently have stock exports in the car, these tinted ones are boxed up in storage.)
He is unworthy of the name of man who is ignorant of the fact that the diagonal of a square is incommensurable with its side.
-brian
2007 F-150
2006 Mitsubishi Outlander
2004 F-350
2000 Dodge Neon
1957 Chevy truck
1989 Chevy 1500
-brian
2007 F-150
2006 Mitsubishi Outlander
2004 F-350
2000 Dodge Neon
1957 Chevy truck
1989 Chevy 1500
that looks good man im leaning more towards tinting everything but the back up lights with vinyl tho that way if i want to go back i can just peal it off
2004 white dodge neon 2.4 DOHC swapped
2004 red dodge neon srt-4 gone
2000 flat black plymouth neon 2.0 DOHC swapped gone
2002 silver dodge neon parts car R.I.P
2000 green dodge neon parts car R.I.P
well two days ago leaving work pulled off the lot and when i was shifting from first to second the transmission did a really loud thump and it seemed as if the car died but it keept driving normal and guess what i got third again yay lol the car self fixed it self lol it grinds bad going into third but before i wouldnt even let me get into that gear.
im not going into third but i feel a lil better that now i can at least go into the gear
im not going into third but i feel a lil better that now i can at least go into the gear
2004 white dodge neon 2.4 DOHC swapped
2004 red dodge neon srt-4 gone
2000 flat black plymouth neon 2.0 DOHC swapped gone
2002 silver dodge neon parts car R.I.P
2000 green dodge neon parts car R.I.P
yeah i figured that if i want to go back to stock look i can just peel it off and be done with it you know
2004 white dodge neon 2.4 DOHC swapped
2004 red dodge neon srt-4 gone
2000 flat black plymouth neon 2.0 DOHC swapped gone
2002 silver dodge neon parts car R.I.P
2000 green dodge neon parts car R.I.P
son dood i get my tax returns on the 18th and im going to do a couple things from my list to the car right away
2004 white dodge neon 2.4 DOHC swapped
2004 red dodge neon srt-4 gone
2000 flat black plymouth neon 2.0 DOHC swapped gone
2002 silver dodge neon parts car R.I.P
2000 green dodge neon parts car R.I.P
well i went to the pick apart and scored a sunroofless headliner with o poop handles i will be painting it black along with my pillars and isntalling it all will have pictures soon.
i also got a set of rear headrest seats i got the front and rears from a fully loaded es i still dont know if i should put them in my car since i have all the bux and rare parts in mine or just put them in the wifes neon
i also got my srt clutch im going to send it out to get ground down and im going to start my side exit exhaust soon ill post pictures soon thanks for looking
i also got a set of rear headrest seats i got the front and rears from a fully loaded es i still dont know if i should put them in my car since i have all the bux and rare parts in mine or just put them in the wifes neon
i also got my srt clutch im going to send it out to get ground down and im going to start my side exit exhaust soon ill post pictures soon thanks for looking
2004 white dodge neon 2.4 DOHC swapped
2004 red dodge neon srt-4 gone
2000 flat black plymouth neon 2.0 DOHC swapped gone
2002 silver dodge neon parts car R.I.P
2000 green dodge neon parts car R.I.P
"o poop handles"??
let me know how painting your headliner/pillars go, because if all
goes well you get to help me put mine together next
looking forward to the side exit exhaust!
let me know how painting your headliner/pillars go, because if all
goes well you get to help me put mine together next
looking forward to the side exit exhaust!
My Progress Log
Official "I'm Going to Drive My Neon till it Dies" Club #000104
WHAT ???srtjesse wrote:pictures like i promised
the wife got cut off today so needles to say it might be totaled
- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009