ThatKevin's Boosted '02 R/T - aaanndd it's DEAD. :'(

ThatKevin · Post by **ThatKevin** » Tue Nov 27, 2012 5:51 pm

BlackRT? wrote:whats funny that lower than a lot of peoples "lowered" cars.. lol

I know

I think for next summer, I'll be going with a 16/17, 50 series sidewall, no camber, and leave it around this height. Go for the nice "fat / flush / functional" look. My passenger axle was rubbing in four different spots

I didn't take a pic though :/

ThatKevin · Post by **ThatKevin** » Wed Nov 28, 2012 4:08 pm

SDK solid mounts!

ThatKevin · Post by **ThatKevin** » Wed Dec 05, 2012 11:34 pm

nothing special, but picked up a new AEM oil pressure gauge! I wanted digital to match, but found an analog for a good price and couldnt say no.

xbrandonx · Post by **xbrandonx** » Thu Dec 06, 2012 11:28 am

you bastard.

ThatKevin · Post by **ThatKevin** » Thu Dec 06, 2012 11:41 am

xbrandonx wrote:you bastard.

I could've gotten that wideband from the same guy cheap too

drove to Richmond hill at 10pm to get this :p

Give me MY wideband already! I want to have it so I can look at the box...

xbrandonx · Post by **xbrandonx** » Thu Dec 06, 2012 1:54 pm

ThatKevin wrote:
xbrandonx wrote:you bastard.
I could've gotten that wideband from the same guy cheap too drove to Richmond hill at 10pm to get this :p

Give me MY wideband already! I want to have it so I can look at the box...

come get it sloot

ThatKevin · Post by **ThatKevin** » Thu Dec 06, 2012 7:06 pm

xbrandonx wrote: come get it sloot

so far

ANYWAYS...

stole this from Brian Casey off of the fb page:

It's getting there! It should be finished this weekend, along with the lower cubby (mine's not pictured). Then I should get it in a week or two. Contemplating buying a double din right away or waiting until boxing day or after christmas

NGCnoproblem · Post by **NGCnoproblem** » Thu Dec 06, 2012 10:45 pm

How much was that? It's such a cool idea! But I can't afford a double din yet

ThatKevin · Post by **ThatKevin** » Thu Dec 06, 2012 10:50 pm

NGCnoproblem wrote:How much was that? It's such a cool idea! But I can't afford a double din yet

neither can I :$

FUTURESHOP CREDIT CARD FTW

NGCnoproblem · Post by **NGCnoproblem** » Thu Dec 06, 2012 10:53 pm

Hahaha how much is a double din? It would b so cool if there was a way to stream megasquirt on it lol

Leighvi424 · Post by **Leighvi424** » Thu Dec 06, 2012 11:29 pm

U can get a nice pioneer double din on ebay for 219 shiiped

ThatKevin · Post by **ThatKevin** » Fri Dec 07, 2012 2:56 pm

Leighvi424 wrote:U can get a nice pioneer double din on ebay for 219 shiiped

justt browsed ebay, didn't see anything good.

I'll just end up buying it from futureshop, will be easier xD

ThatKevin · Post by **ThatKevin** » Sun Dec 09, 2012 9:06 pm

Had to bring my skis and my buddies skis/snowboard to get tuned up and ready for the season tonight, so I threw on the roof rack

pics are pretty shitty, it was dark out SORRY!

Five pairs of skis and a snowboard, this rack holds a lot!

ThatKevin · Post by **ThatKevin** » Thu Dec 13, 2012 11:18 pm

My bezel is done, just waiting on the lower cubby to get finished up. It doesn't look as good as the other ones.. I think he's getting too busy with these and starting to rush them :/ too bad

BlackRT? · Post by **BlackRT?** » Fri Dec 14, 2012 6:06 am

just shoot it with some filler primer or etching and then whatever color you want and it will fill any inperfections

ThatKevin · Post by **ThatKevin** » Sat Dec 22, 2012 1:53 pm

He hasn't even started my lower cubby yet, this is starting to bother me. It's been just over 5 weeks, he said it would take one week to do. FUCK, I'm buying a double din next week too -_______________-

Anyways, my bottom end is finally done! Money is just sitting in the bank for it, but it's 2 hours north of me

.

Also, got a sweeeeet present from my buddy:

Two Mopar shirts, and a "Got Boost" SRT shirt... even though I have no boost

xbrandonx · Post by **xbrandonx** » Sat Dec 22, 2012 5:55 pm

ill take that one off your hands

sidepipe87 · Post by **sidepipe87** » Sat Dec 22, 2012 6:53 pm

boxing day? wtf. this is 'murica

ThatKevin · Post by **ThatKevin** » Thu Dec 27, 2012 7:28 pm

sidepipe87 wrote:boxing day? wtf. this is 'murica

wuuuuuuuut?

I'm bored, decided to update with nothing exciting.

bought a double din on tuesday, Pioneer AVH-P2400BT. I should be getting it tomorrow in the mail.

paid for the machine work on my bottom end today, might have it sometime next week.

OHHH and we FINALLY got some snow:

edit*
forgot to mention.. SOMEONE STOLE MY FOG LIGHT :'( there was a party a few doors down and some douchebag kids fucked up the paint underneath my fog light and took the fog light.. I'm assuming it's them at least, since I went to bed with a fog and woke up without one. I'm looking for some decent priced fog deletes now

BlackRT? · Post by **BlackRT?** » Fri Dec 28, 2012 4:17 am

fogs are only 40$ per.. why not buy 1

ThatKevin · Post by **ThatKevin** » Fri Dec 28, 2012 11:57 pm

BlackRT? wrote:fogs are only 40$ per.. why not buy 1

want deletes, I cut the fog wires a while ago, just never bothered to get deletes.. now I have reason :p

Winter whore!

got my double din today, was very excited and started putting it in without the bezel. Decided it was a stupid idea

I have to wait around two weeks for my bezel

now I'm even more impatient. FUUUCCKK

7654800neon · Post by **7654800neon** » Sat Dec 29, 2012 12:16 am

how do you like that dd that's the one I want

NGCnoproblem · Post by **NGCnoproblem** » Sat Dec 29, 2012 12:34 am

Dude me want lol

BlackRT? · Post by **BlackRT?** » Sat Dec 29, 2012 1:03 am

just duck tape it in there

ThatKevin · Post by **ThatKevin** » Sat Dec 29, 2012 10:48 am

7654800neon wrote:how do you like that dd that's the one I want

I have no idea yet, not wiring it until my bezel comes in.

eviltucson · Post by **eviltucson** » Sat Dec 29, 2012 2:50 pm

looks great.... I see you must have bought some parts ie: turbo, hard piping, pistons off of cutshield? I guess your staying SOHC but with turbo. You will love the difference in your car. I bought my brothers 2K neon with 2.4L stratus motor with new srt internals / 50trim /MS2 / borla exhaust etc. Nuno built the car... runs awesome is super fast after I fixed the tune. I just bought a 2L race ported head as I have a problem with smoke during start up my valve seals are gone. We all gotta get together sometime an have a meet in the spring.

xbrandonx · Post by **xbrandonx** » Sat Dec 29, 2012 3:03 pm

Updating this for you, in about 30 minutes you will have your wideband!

ThatKevin · Post by **ThatKevin** » Sat Dec 29, 2012 5:03 pm

xbrandonx wrote:Updating this for you, in about 30 minutes you will have your wideband!

THHAANNKZZZZZXXXXX

Decided to do a little general maintenance today. Bought new wipers, plugs, and another litre of oil.

A tube of adhesive opened up at one point, and I found out today when I went to grab my gapper

luckily 0.000 - .050 was clean, so I was able to use it anyways.

annnddd then I find out this:

It's only in 4, the other three are dry.

redneckmoparman · Post by **redneckmoparman** » Sun Dec 30, 2012 12:45 am

that sucks im always fighting those damn tubes to fix the problem once and for all go buy some NEW tubes and replace them with sealant on the head side and new seals in the valve cover and then you wolnt have a problem ive found out they like to come out of the head and leak in the bottom and I just like to do new seals up top to make sure its not an issue but I don't remember which sealant to use and I have factory fog deletes that are in good condition

BlackRT? · Post by **BlackRT?** » Sun Dec 30, 2012 6:43 am

just put a dohc head on it and you wont have that problem lol