parabola's project log-New oil pan

Do you have a project going or will you be starting a project here very soon and just want to keep a log of everything you and when? Share with everyone every step of the way what sort of progress you are making on your project.
User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

parabola's project log-New oil pan

Post by NEON PARABOLA » Fri Dec 30, 2011 8:45 am

My car is a black 2003 neon sxt.

I purchased her June 24th 2008 from plaza pontiac buick jmc in Omaha,nebraska with about 120,000 miles on her.

Plans for Le Future:
Radiator brackets (powder) -DONE
upper motor mount (just spray painting that gloss black)-DONE
Radiator fill cap (spray gloss black)
Radiator shroud (powder gloss black)
Oil fill cap (buying a billet one from MP, powdercoat red)
VALVE COVER (powder gloss red)-Done
rear sway bar
CORRECT front sway bar bushing kit
get a fuel rail to powder coat-DONE
paint hvac bezel same red color
POSSIBLY get lower controll arms installed-Done


Image
The day i drove her home (I only had a learners permit)

Image
This is about 6 months later, I had gotten some depo tail's and did some pin striping.

Image

Then we JUMP two years to last summer

Image

as you can see, new headlights,tail lights,markers,eyelids,stripe,srt seats and other small stuff I was able to do on my own.

Image

Image

Image

Image

about a year later the car was down due to over heating and In that time,I decided it was time to tone it down a bit and I removed the side mouldings and 99% of the stickers/stripes.

Image

It looks kinda plain.....

Image

I'm contemplating going back to how it looked in june of '10 but I wana know what you guys think 1st before I order the vinyl :P

Image

Well,
Sarah got me a eBay CAI for Xmas, and last night I had time to put it on. It was fun and took me a few hours (I clean everything I take out, and clean all parts I can get to when I remove something)

I had to go get two breather filters since the hose they included was a joke. They cost me 10 bucks each, but look kinda cool IMO.

Im glad I had that powder coated battery tray I did laying around, since that is MUCH more visible without that air box. The tray that came on the car will now be stripped and PC'd and probably given to d-railed or sold.

I am a bit nervous however that the filter will fall off and I will suck crap into my engine, I pulled on it and it seemed tight,but I worry wayyyyyy tooooooo much
_____________________________________________________
New struts were put in on Saturday with the help of Daryl (d-railed neon) and friend Rob. The day started out at noon ( it's the weekend) and with the help of some beer things got started quickly. Old struts were out and new ones in rather quickly. The plan was to replace the lower control arms as well but we decided to make that a project for another day. After the new struts I drove home and the ride was nice but I knew something was wrong as my steering was sloppy and downright scary at times ( pulled to left and right randomly) After a front end alignment the problem was still there and the mechanics suggested new tires..... ( uhhh....no) so Today I left work with the goal of tearing the front end apart and checking every bolt to make sure nothing was loose. sure enough I had loosened a bolt on the lower control arm and had thought that I hadn't loosened it. In fact I had backed it out by a 1/4" or so. After tightening that I decided to FINALLY address the motor mount issues (needed replaced) So new motor mounts and inserts later, and the car handles beautifully! as a side note, I was finally able to powder coat my cold air intake today. A nice deep red to match the battery trey.


PICS!


Image

Image
Old ones OUT!

Image
The sun makes it look orange but its realy same color as the battery trey

Image
removing sway bar bushings....
(come to find out, I got sent rear sway bark bushing kit instead of fronts.....sad day :( )

Image

strutless!


Image
on the stands

Image
realizing I had got the wrong bushing kit....fml

Image

The end of a great day! :)


Image


thanks for the help Daryl!
_____________________________________________________
Image

Image


Image


Image

Closeup-
Image

and my next project......

Image

UPDATE!

Powder coated the spare tire hold down hardware:
Image
and did an injector cover 9I do NOT like this plastic with liquid paint crap...)
Image

and color matched grille trim again. thank god!
Image

The valve cover is clean and ready to be masked and powdercoated, excited! I hope to do that tomorrow (Friday) after work!


_________________________________________________________
5/4/2012

so! do you hoes remember this!?

Image


well now it looks like this!

Image

cant wait to put it on!!!!

next plan:

possibly a coil pack cover
lower controll arms
rear sway bar



Image

Image


woohoo! was a very fun project!!!

___________________________________________________'
9-10-2012

God damn is my neck soar, I replaced the oil pan over the weekend, I was planing on doing a regular oil change, and installing an oversize drain plug rather than spending the moneys for a whole new pan and gasket. Well, I went to start the oil change and the plug nearly pulled straight out! I DODGED A HUGE bullet! thing could have easily lost grip while driving and left me with a blown engine. I thank GOD that it did not. I fudged around with the oversized drain plug and I finally said screw it, and me and dad ran to the parts store. I'm here to tell you, oil pan replacement is a breeze. I ran into no snags, and it was done within a hour from the time i got back with the new pan.

Now I need to find the source of this damn vibration. Only does it in the mornings after it's sat all night. does it when i accelerate, and at stop lights it has a real choppy idle. Goes away completely in neutral. after it has been driven, it goes away and it wont do it on the way home from work. My upper and lower torque struts are torqued to spec. I'm not sure what to make of it.

:banghead:
Last edited by NEON PARABOLA on Mon Sep 10, 2012 10:32 am, edited 13 times in total.
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Fri Dec 30, 2011 9:47 am

:twisted:
Last edited by NEON PARABOLA on Thu Apr 26, 2012 9:26 am, edited 1 time in total.
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

ianguilly
2GN Member
Posts: 465
Joined: Wed Dec 02, 2009 6:35 pm
Location: Cincinnati, OH

Post by ianguilly » Fri Dec 30, 2011 9:53 am

I liked the red graphics, I think it would look good lowered aswell.
-Neon #3 1999 Neon R/T coupe,DOHC MTX
-Neon #4 1998 Neon Alpine green coupe SOHC MTX -daily shit box

Official "I'm gonna drive my Neon until it dies" Club Member #110

DodgeEvo
2GN Member
Posts: 879
Joined: Mon Apr 18, 2011 2:33 pm
Location: Cape Cod, Ma

Post by DodgeEvo » Fri Dec 30, 2011 5:46 pm

Looking good and keep taking pics.
Patrick

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Fri Dec 30, 2011 6:35 pm

Thinking of going to home depot and buying a nice shiny black hose to connect where the breathers are. is there any benefit to one of the other?
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Sat Dec 31, 2011 12:55 pm

So I think I need to focus on the front end 1st,the bumper is cracked to hell,I'm missing the grille inserts and a badge and my eyelids are craacked.......it makes me sad. I wana do the 02 swap real bad but geting a new 03 bumper is cheaper......idk
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

User avatar
sidepipe87
2009 Silver Contributor
Posts: 9494
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Post by sidepipe87 » Sat Dec 31, 2011 2:38 pm

should have put a vacuum cap over that nipple on the pipe between the filter and the throttle body instead of a breather filter... leave the breather filter on the valve cover

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

new struts!!!!

Post by NEON PARABOLA » Mon Mar 12, 2012 11:25 pm

:rockon:
Last edited by NEON PARABOLA on Thu Apr 26, 2012 9:27 am, edited 2 times in total.
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

User avatar
D-Railed_Neon
2011 Bronze Contributor
Posts: 723
Joined: Sun Oct 23, 2011 8:39 pm
Location: Bellevue, NE

Post by D-Railed_Neon » Tue Mar 13, 2012 12:43 pm

you are quite welcome sir :thumbup: However, MOOOOAAAARRRR PICS! :twisted:
MY PROJECT LOG My Old 2002 ES AND My 2003 SXT

It is not that we cannot be friends, it's that you are a zombie, and I am almost out of ammo. -Someone

User avatar
Public Disturbance
2GN Member
Posts: 877
Joined: Mon Aug 22, 2011 1:38 pm
Location: Rapid City, SD

Post by Public Disturbance » Tue Mar 13, 2012 1:05 pm

Looking good sir looking good

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Fuel rail

Post by NEON PARABOLA » Thu Mar 29, 2012 10:28 am

:thefinger:
Last edited by NEON PARABOLA on Thu Apr 26, 2012 9:28 am, edited 1 time in total.
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

User avatar
D-Railed_Neon
2011 Bronze Contributor
Posts: 723
Joined: Sun Oct 23, 2011 8:39 pm
Location: Bellevue, NE

Post by D-Railed_Neon » Thu Mar 29, 2012 4:33 pm

Looking sharp!. That pic honestly doesn't do that fuel rail justice. I saw it firsthand last night and its absolutely gorgeous. Thing freaking pops!. Somebody help this guy out with getting a magnum high output injector cover. Those wires drive me crazy, and the natural black and red would finish that area up imho. Otherwise, nice work brother! :rockon:
MY PROJECT LOG My Old 2002 ES AND My 2003 SXT

It is not that we cannot be friends, it's that you are a zombie, and I am almost out of ammo. -Someone

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Thu Mar 29, 2012 4:35 pm

I found a rattle can from rust-olium, and the red is nearly a exact match for the powder, so i THINK if I can get my hands on a injector cover, i will paint the entire thing and do the letters black....

I'm posting better pics tonight hopefully :rockon:
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

User avatar
MyNeonSaysHi
2GN Veteran
Posts: 11801
Joined: Mon May 23, 2005 8:46 pm
Location: Kansas

Post by MyNeonSaysHi » Fri Mar 30, 2012 12:35 am

AWesome work, that engine bay is coming together nicely. Its also good to see active 2gners near me! Check your local junk yards! I am sure you can find a 2.0 injector cover from a 2gn.. PRetty common, then paint the lettering red.

08 Acura TL-S
05 Neon SRT-4

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Sat Mar 31, 2012 1:31 pm

:beatstick:
Last edited by NEON PARABOLA on Thu Apr 26, 2012 9:28 am, edited 1 time in total.
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

Spaz
n00b
Posts: 19
Joined: Thu May 20, 2010 7:58 pm
Location: Gresham, OR

Shift knob

Post by Spaz » Tue Apr 03, 2012 4:42 pm

I got a red shift knob from here. I love it and now my friend and his wife have two for there 1st gen one purlpe one blue and my younger brother has a black one.

http://www.custombilletstore.com/Billet ... /10065.htm

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Tue Apr 03, 2012 4:47 pm

Pretty sexy stuff, a little on the $$$$ side tho....
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

Spaz
n00b
Posts: 19
Joined: Thu May 20, 2010 7:58 pm
Location: Gresham, OR

Post by Spaz » Tue Apr 03, 2012 6:09 pm

yeah it is thats the only downfall.

loroku@aol.com
2GN Member
Posts: 153
Joined: Thu Aug 04, 2011 10:26 pm
Location: janesville wi

Post by loroku@aol.com » Fri Apr 06, 2012 1:44 am

what no performance parts???? the earlier vynls lookd good needs different wheels tho. the muffler looks pretty good
Sold My Soul for a Neon
pm me for all your HID retrofit needs
ASP turbo
Tunergeeks
Extreme Turbo Systems

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Sun Apr 08, 2012 2:16 pm

loroku@aol.com wrote:what no performance parts???? the earlier vynls lookd good needs different wheels tho. the muffler looks pretty good

what performance upgrades would you recommend for a daily driver with a ATX and 145,000 miles? lol
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

loroku@aol.com
2GN Member
Posts: 153
Joined: Thu Aug 04, 2011 10:26 pm
Location: janesville wi

Post by loroku@aol.com » Mon Apr 09, 2012 12:26 am

low boost turbo :rockon: 230whp :beatstick:
you could jack all the parts from an atx gt crusier :D
Sold My Soul for a Neon
pm me for all your HID retrofit needs
ASP turbo
Tunergeeks
Extreme Turbo Systems

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Fri Apr 20, 2012 10:58 am

:cussing:
Last edited by NEON PARABOLA on Thu Apr 26, 2012 9:29 am, edited 1 time in total.
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

User avatar
D-Railed_Neon
2011 Bronze Contributor
Posts: 723
Joined: Sun Oct 23, 2011 8:39 pm
Location: Bellevue, NE

Post by D-Railed_Neon » Fri Apr 20, 2012 4:16 pm

Those brackets look awesome man! And that valve cover is gonna be all sexy and what not lol. Keep up the great work man :thumbup:
MY PROJECT LOG My Old 2002 ES AND My 2003 SXT

It is not that we cannot be friends, it's that you are a zombie, and I am almost out of ammo. -Someone

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Thu Apr 26, 2012 9:58 am

bump for update in post #1
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Fri May 04, 2012 7:58 pm

friday freeky bump
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

User avatar
RobsProjectSOHC
2012 Gold Contributor
Posts: 415
Joined: Fri Aug 19, 2011 11:36 am
Location: NY

Post by RobsProjectSOHC » Sat May 05, 2012 11:16 pm

boooo, i wanted to see it on.
so far so good though, lol
Project 003. Just building a Daily Driver with some upgrades.
For Sale Thread | CarDomain | FeedBack
Official "I'm gonna drive my Neon until it dies Club" Member #119

User avatar
NeonNick925
2GN Member
Posts: 563
Joined: Sat Nov 12, 2005 10:07 pm
Location: West Pittsburg, Cali

Post by NeonNick925 » Sun May 06, 2012 2:15 pm

coming along nicely man!
2000 Plymouth Neon ACR/T hybrid 3 speed auto•now a 5 speed•




Image

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Mon May 07, 2012 9:24 am

RobsProjectSOHC wrote:boooo, i wanted to see it on.
so far so good though, lol
next weekend my friend, gasket kit is on it's way :)
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Mon May 14, 2012 10:24 am

got the valve cover installed! looks schweet!
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

User avatar
D-Railed_Neon
2011 Bronze Contributor
Posts: 723
Joined: Sun Oct 23, 2011 8:39 pm
Location: Bellevue, NE

Post by D-Railed_Neon » Mon May 14, 2012 10:54 am

looks freaking sweet indeed! nicely done sir :thumbup:
MY PROJECT LOG My Old 2002 ES AND My 2003 SXT

It is not that we cannot be friends, it's that you are a zombie, and I am almost out of ammo. -Someone

Post Reply

Return to “Progress/Project Log”