NGCturbo project log: finally a video

Do you have a project going or will you be starting a project here very soon and just want to keep a log of everything you and when? Share with everyone every step of the way what sort of progress you are making on your project.
ThatKevin
2GN Member
Posts: 1176
Joined: Wed Aug 03, 2011 12:48 pm
Location: Brampton, ON

Post by ThatKevin » Wed Aug 01, 2012 9:52 pm

NGCnoproblem wrote:Y can't you decide? Eric at asp really thinks highly of the bullseye s256net
check your pm's
Image
'02 Chrysler Neon RT - SOHC 50trim+Crane 007 ---DEAD---
'05 Dodge Neon SRT4 - DSP & bolt ons ---SOLD---
'08 Dodge Caliber SRT4 - MS1Kv3
Progress Log

stdlystdmufn
2GN Member
Posts: 1019
Joined: Sun Feb 19, 2006 7:29 pm
Location: Indianapolis, IN
Contact:

Post by stdlystdmufn » Wed Aug 01, 2012 9:59 pm

the polished mag is looking good.
Image
in the middle of a DOHC and MTX swap and going with an ASP kit pwered by the S259 batmowheel

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Wed Aug 01, 2012 11:08 pm

^thanks! Next time I get to go to inlaws I will finish it
Sorry for Party Rockin
Image

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Mon Aug 13, 2012 11:57 pm

Somethin came in the mail today :D

Image
Sorry for Party Rockin
Image

stdlystdmufn
2GN Member
Posts: 1019
Joined: Sun Feb 19, 2006 7:29 pm
Location: Indianapolis, IN
Contact:

Post by stdlystdmufn » Tue Aug 14, 2012 12:01 am

^
the link is bad BOOO!
Image
in the middle of a DOHC and MTX swap and going with an ASP kit pwered by the S259 batmowheel

adxavier06
2GN Member
Posts: 74
Joined: Tue Oct 04, 2011 2:27 pm
Location: houston tx

Post by adxavier06 » Tue Aug 14, 2012 12:49 am

Aww Snap!!!
Image

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Tue Aug 14, 2012 1:03 am

Are you sure? It's working for me
Sorry for Party Rockin
Image

User avatar
D-Railed_Neon
2011 Bronze Contributor
Posts: 723
Joined: Sun Oct 23, 2011 8:39 pm
Location: Bellevue, NE

Post by D-Railed_Neon » Tue Aug 14, 2012 2:03 pm

Dude that shoe is AMAZING!! where the hell did you get it?!? oh,.....and whats the shiny snail looking thing next to it? :rofl:


seriously props on the snail. What type is iit and did you get it from ASP?
MY PROJECT LOG My Old 2002 ES AND My 2003 SXT

It is not that we cannot be friends, it's that you are a zombie, and I am almost out of ammo. -Someone

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Tue Aug 14, 2012 2:21 pm

Lol!

And thanks. It's S256net from Eric
Sorry for Party Rockin
Image

User avatar
D-Railed_Neon
2011 Bronze Contributor
Posts: 723
Joined: Sun Oct 23, 2011 8:39 pm
Location: Bellevue, NE

Post by D-Railed_Neon » Tue Aug 14, 2012 2:24 pm

Good choice. I know a couple of guys on here are running that snail and Eric is the man! I will be buying a s252 from him here in the coming months. Props and congratulations bro! :thumbup:
MY PROJECT LOG My Old 2002 ES AND My 2003 SXT

It is not that we cannot be friends, it's that you are a zombie, and I am almost out of ammo. -Someone

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Tue Aug 14, 2012 2:34 pm

Thanks man

Wat made u go with the 252
Sorry for Party Rockin
Image

User avatar
D-Railed_Neon
2011 Bronze Contributor
Posts: 723
Joined: Sun Oct 23, 2011 8:39 pm
Location: Bellevue, NE

Post by D-Railed_Neon » Tue Aug 14, 2012 2:42 pm

My overall HP goal and DD status. building in stages so the top end of the motor will be all built while the bottom half of the motor will remain stock.....stage 1 will only b 5-8 Psi and sub 250HP the next stage some time down the road will be overbored low comp forged and probably 13-17 psi but don't really have any interest in 400HP+ Im hoping for around 330 or so on a DD stable platform. The s252 was recommended by eric over the s256 for my application. Will be recieving a PnP Mag head with gasket matched mag manifold with butterflys removed and 1mm oversized valves and a comp 400. S252 on an STR log :)
MY PROJECT LOG My Old 2002 ES AND My 2003 SXT

It is not that we cannot be friends, it's that you are a zombie, and I am almost out of ammo. -Someone

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Tue Aug 14, 2012 4:36 pm

Your goals are a lot like mine. Hopefully I picked the right turbo.
Sorry for Party Rockin
Image

ThatKevin
2GN Member
Posts: 1176
Joined: Wed Aug 03, 2011 12:48 pm
Location: Brampton, ON

Post by ThatKevin » Tue Aug 14, 2012 4:55 pm

NGCnoproblem wrote:Your goals are a lot like mine. Hopefully I picked the right turbo.
I do too.. I'm probably going with the same one :p

unless I can find something else used

together we can almost build ONE turbo car!
Image
'02 Chrysler Neon RT - SOHC 50trim+Crane 007 ---DEAD---
'05 Dodge Neon SRT4 - DSP & bolt ons ---SOLD---
'08 Dodge Caliber SRT4 - MS1Kv3
Progress Log

User avatar
D-Railed_Neon
2011 Bronze Contributor
Posts: 723
Joined: Sun Oct 23, 2011 8:39 pm
Location: Bellevue, NE

Post by D-Railed_Neon » Tue Aug 14, 2012 4:56 pm

No don't worry about it lol. The S256 is a great turbo it just has a bit more top end potential than the 252. I want more midrange pull than top end balls out speed so it fits into my build a little better than the folks wanting to go super fast or push the limits on horespower. The 256 is just as capable as the 252 in midrange but from what I understand is geared towards top end......quite a bit more to it but you get the idea lol
MY PROJECT LOG My Old 2002 ES AND My 2003 SXT

It is not that we cannot be friends, it's that you are a zombie, and I am almost out of ammo. -Someone

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Tue Aug 14, 2012 4:57 pm

Kevin: Well Eric said its the right one for my goals so we will see. Lol that's a good point

Derailed: ok cool good to hear.

I have a turbo boner and it won't go away. It's like I took viagra hahaha
Sorry for Party Rockin
Image

User avatar
D-Railed_Neon
2011 Bronze Contributor
Posts: 723
Joined: Sun Oct 23, 2011 8:39 pm
Location: Bellevue, NE

Post by D-Railed_Neon » Tue Aug 14, 2012 5:05 pm

I call it boost wood :rofl:
MY PROJECT LOG My Old 2002 ES AND My 2003 SXT

It is not that we cannot be friends, it's that you are a zombie, and I am almost out of ammo. -Someone

stdlystdmufn
2GN Member
Posts: 1019
Joined: Sun Feb 19, 2006 7:29 pm
Location: Indianapolis, IN
Contact:

Post by stdlystdmufn » Tue Aug 14, 2012 6:09 pm

i dont know why the pic wasnt working for me earlier but it is now and SWEET. mine should be here sometime this week! can't wait
D-Railed_Neon wrote:I call it boost wood :rofl:

i call mine batmo-wood
Image
in the middle of a DOHC and MTX swap and going with an ASP kit pwered by the S259 batmowheel

ThatKevin
2GN Member
Posts: 1176
Joined: Wed Aug 03, 2011 12:48 pm
Location: Brampton, ON

Post by ThatKevin » Tue Aug 14, 2012 6:14 pm

what wastegate are you going with?
Image
'02 Chrysler Neon RT - SOHC 50trim+Crane 007 ---DEAD---
'05 Dodge Neon SRT4 - DSP & bolt ons ---SOLD---
'08 Dodge Caliber SRT4 - MS1Kv3
Progress Log

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Tue Aug 14, 2012 9:36 pm

I'm runnin a tial 38mm


BTW: I have 3 more items coming in the mail :)
Sorry for Party Rockin
Image

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Wed Aug 29, 2012 9:31 pm

Another item is here!

Image

So fricken sexy :P''''

Also got a 3" ss moroso spiral flow a few weeks ago.


More comin including one very important part
Sorry for Party Rockin
Image

User avatar
D-Railed_Neon
2011 Bronze Contributor
Posts: 723
Joined: Sun Oct 23, 2011 8:39 pm
Location: Bellevue, NE

Post by D-Railed_Neon » Fri Aug 31, 2012 4:04 pm

I love tial :thumbup: can't wait to see this come together. Im actually planning on running the same valve and gate but both will be in standard JDM rice purple LOL
MY PROJECT LOG My Old 2002 ES AND My 2003 SXT

It is not that we cannot be friends, it's that you are a zombie, and I am almost out of ammo. -Someone

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Fri Aug 31, 2012 4:10 pm

I think tial is the shit. I'm excited too. I'm so close but so far away lol. I wanna see wat you build.
Sorry for Party Rockin
Image

User avatar
D-Railed_Neon
2011 Bronze Contributor
Posts: 723
Joined: Sun Oct 23, 2011 8:39 pm
Location: Bellevue, NE

Post by D-Railed_Neon » Fri Aug 31, 2012 4:19 pm

well youll have to just come down to NE when I start getting everything together for it and giive me a hand lol
MY PROJECT LOG My Old 2002 ES AND My 2003 SXT

It is not that we cannot be friends, it's that you are a zombie, and I am almost out of ammo. -Someone

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Fri Aug 31, 2012 4:33 pm

I wish lol. Nebraska is way to far away
Sorry for Party Rockin
Image

User avatar
D-Railed_Neon
2011 Bronze Contributor
Posts: 723
Joined: Sun Oct 23, 2011 8:39 pm
Location: Bellevue, NE

Post by D-Railed_Neon » Fri Aug 31, 2012 4:39 pm

its only as far away as you want it to be now you on the other hand are way too far away! :rofl:
MY PROJECT LOG My Old 2002 ES AND My 2003 SXT

It is not that we cannot be friends, it's that you are a zombie, and I am almost out of ammo. -Someone

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Fri Aug 31, 2012 5:11 pm

We will just have to represent the neons in or own time zones lol
Sorry for Party Rockin
Image

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Mon Sep 03, 2012 1:24 pm

I forgot to also mention I got a innovate lc-1 wideband with a led blue digital gauge :)
Sorry for Party Rockin
Image

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Mon Sep 03, 2012 10:11 pm

Actually installed somethin today ha. Gotta thank turboduty and quicksilvr for the good pics from their project.

Here's how it turned out.

Image

But wen I took off bumper I noticed a sensor hanging in front of the radiator. I kept it there on the install. Idk wat it is lol. Looks like this

Image



Any idea wat it is?
Sorry for Party Rockin
Image

User avatar
fargo59
2GN Member
Posts: 118
Joined: Sat Nov 19, 2011 9:05 pm
Location: niagara falls ON.

Post by fargo59 » Mon Sep 03, 2012 10:37 pm

ambient air temp sensor.

Post Reply

Return to “Progress/Project Log”