Ah, it doesn't have the lip anymore? If not then I don't need it, sorry.Turbo2300 wrote:I shouldn't need a bumper in return. It had the mopar rear lip on it tho, so it has the mounting holes tho
2001/2003 neon race car builds
2001 Neon Bagged, 17" Drag DR31, SRT4 Hood & Bumpers, R/T side skirts, dipped
2008 Lincoln Navigator family hauler
1984 Monte Carlo SS bagged, 18/20, shaved, worked 350sbc, 700r4
2008 Lincoln Navigator family hauler
1984 Monte Carlo SS bagged, 18/20, shaved, worked 350sbc, 700r4
Girlfriends dad fabbed me up a dash out of sheet metal leftovers
Traced the windshield to a piece of cardboard when I removed it, I just traced the lexan to the cardboard cutout
Painted the front roll bars so we could install the lexan
And got my window net mounted and her dad made a door sill so I don't bend the door up getting in and out this year
Traced the windshield to a piece of cardboard when I removed it, I just traced the lexan to the cardboard cutout
Painted the front roll bars so we could install the lexan
And got my window net mounted and her dad made a door sill so I don't bend the door up getting in and out this year
LMAO "SR/T4"
Justin
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823
-
- 2GN Member
- Posts: 185
- Joined: Thu May 19, 2011 3:35 am
- Location: Olympia, WA
Uhhhh ohhhh! Over class rules!!
Comp 400 cam raises compression to roughly 210psi. Stock '01 cam runs around 180psi, only a little over the limit. It should loosen up a little after a few trips around at rev limiter. Pulled the motor and then the head off, cleaned all the valves up. All the cylinders crank fairly close to the same pressures now.
Left side rub rail made as well
Coming together!!
Opened the right rear wheel opening up with Ryan's fender roller
Had a special set of wheels made this year. Hoping to stop breaking front rotors
And I found this pic from last years car, relocated the ecu from heat/getting smashed
This is what it's going to look like. I think I'm gonna lean towards the top design
Comp 400 cam raises compression to roughly 210psi. Stock '01 cam runs around 180psi, only a little over the limit. It should loosen up a little after a few trips around at rev limiter. Pulled the motor and then the head off, cleaned all the valves up. All the cylinders crank fairly close to the same pressures now.
Left side rub rail made as well
Coming together!!
Opened the right rear wheel opening up with Ryan's fender roller
Had a special set of wheels made this year. Hoping to stop breaking front rotors
And I found this pic from last years car, relocated the ecu from heat/getting smashed
This is what it's going to look like. I think I'm gonna lean towards the top design
top design
Justin
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823
-
- 2GN Member
- Posts: 542
- Joined: Mon Jul 28, 2008 6:38 pm
- Location: Scio, NY
- a23dranger
- 2GN Member
- Posts: 1059
- Joined: Sat Sep 05, 2009 11:07 pm
- Location: Lehigh Valley PA
Haha I'll get some more pics this weekend for you, as it's a Saturday/Sunday practice. I got some stuff to tidy up yet, then throw it on the dyno for shits, and then blast a few laps. It's gonna look good all assembled, but I have to wait till next week for it to get lettered.
Best part is, I'm fairly sure secret hasn't gotten out it's an R/T lol
Best part is, I'm fairly sure secret hasn't gotten out it's an R/T lol
they'll figure it out when they cant catch you
Justin
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823
- a23dranger
- 2GN Member
- Posts: 1059
- Joined: Sat Sep 05, 2009 11:07 pm
- Location: Lehigh Valley PA
- a23dranger
- 2GN Member
- Posts: 1059
- Joined: Sat Sep 05, 2009 11:07 pm
- Location: Lehigh Valley PA
- a23dranger
- 2GN Member
- Posts: 1059
- Joined: Sat Sep 05, 2009 11:07 pm
- Location: Lehigh Valley PA
stance done right
Justin
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823