Stage 3 PCM and aftermarket turbo?

BillyMike · Post by **BillyMike** » Sun Mar 31, 2013 3:09 pm

Ok boys and girls heres my deal:
I have an 05 Stage 2 with toys SRT-4 that I want to upgrade to a Stage 3.
I have collected the S3 PCM and fuel rail but cant seem to find the S3 turbofold or fuel pump/canister.
So my question is can i use an aftermarket turbo (20g, t3/t4, ect...) and the S3 PCM to control it?

I know yall are going to say ask this on SRTFourms, buy a SCT/DSP and aftermarket turbo ect... you'll make more power...
Thats not what I want to do I would like to build as close to a "MOPAR" car that I can.

Thanks again.
BillyMike

Jenni · Post by **Jenni** » Sun Mar 31, 2013 6:52 pm

you will not need the S3 pcm. sell it and you will earn a good price!
you've seen the right way. w/o the right turbo the S3 pcm makes no sense.
the pcm "knows" only the stage 3 turbo and nothing else.
you also have the correct injectors?
(not sure but could be that S2 and S3 are the same...)

Neon4Life · Post by **Neon4Life** » Sun Mar 31, 2013 7:12 pm

if you want to keep it MOPAR theme then theres no other way then to get the Mopar stage 3 turbo anything else and it would be stupid and like JENNI said it would be dumb to try and use the stage 3 pcm with another turbo.

theres a guy on srt forums selling a Mopar stage 3 with tial wheel
650cc injectors,Maxx Fab o2 housing,Manifold is ported for $1600. if you want me to send u the link LMK but unless u are registered there i dont think youll be able to see the thread.