Part Number Request: Valve Cover Gasket Set

latief · Post by **latief** » Sat Feb 10, 2007 9:53 am

off course for the valve cover and the spark plug seals and whatever else is needed ......how much ?

thanks,

scneonchic · Post by **scneonchic** » Sat Feb 10, 2007 7:59 pm

its cheaper to get it from advance auto, or autozone. I paid about $25 for mine from advance auto and it came w/ the gasket, valve stem seals, and seals for the bolts.

BlackRoseRacing · Post by **BlackRoseRacing** » Wed Feb 14, 2007 6:08 am

5018789AC - R/T gasket package engine upper - $107msrp
5093991AA - Non-R/T gasket package engine upper - $110 msrp

Individual pieces:
4777626AA - Valve cover gasket - $12.95
4777042AB - Spark plug tube seals - $6.00 each (4 needed)
4777086 - Cam seal - $7.60
4884111AA - Cam sensor seal - $4.10
4648623AB - R/T manifold to head gasket - $4.35
4777895AA - Non-R/T manifold to head gasket - $4.25 each (4 needed)
4884089AB - R/T exhaust manifold gasket - $8.50
4667492 - Non-R/T exhaust manifold gasket - $8.60
4648619 - Valve seals - $3.25 each (16 needed)
5096212AA - Headgasket package (includes valve cover gasket) - $54.60

Wenuden · Post by **Wenuden** » Sat Mar 08, 2008 1:49 am

Is there a separate part number for a valve cover gasket set for the srt-4 carbon fiber valve cover?

Post by **Canada** » Sat Mar 08, 2008 9:52 am

I imagine it uses the stock SRT valve cover gasket and seals.

Post by **Diablo0** » Sat Mar 08, 2008 12:38 pm

If its anything like my 2.0L CF cover it uses the stock gasket but the not the tube seals as they are built into the cover.

krc21 · Post by **krc21** » Wed Apr 23, 2008 5:05 pm

post resurection... ok i just want to get my valve cover powdercoated.. the guy mentioned a might want a new gasket.. im so confused... 110$$$ for a gasket.. he said the srt ones are around 25$... i correct myself..

4777626AA - Valve cover gasket - $12.95

this is all i need right?

Danteneon · Post by **Danteneon** » Wed Apr 23, 2008 5:18 pm

And the tube seals.

4777042AB - Spark plug tube seals - $6.00 each (4 needed)

I would change them unless you did those recently.

nerox · Post by **nerox** » Sun Oct 31, 2010 5:46 am

can someone provide the part number for the spark plug tubes ?

Thanks

Post by **occasional demons** » Sun Oct 31, 2010 6:28 pm

nerox wrote:can someone provide the part number for the spark plug tubes ?

4648604 Spark Plug Tube $5.95 each.

Also fits 3.2, 3.5, and 4.0 V6 engines, so they should be available for some time to come.

IDK if they come with the recommended loc-tite to install them tho.

INSTALLATION
(1) Clean area around spark plug with Mopart
parts cleaner or equivalent.
(2) Apply Mopart Stud and Bearing Mount or
equivalent to a new tube approximately 1 mm (0.039
in.) from the end in a 3 mm (0.118 in.) wide area.
(3) Install sealer end of tube into the cylinder
head. Then carefully install the tube using a hardwood
block and mallet until the tube is seated into
the bottom of the bore.
(4) Install the cylinder head cover.

Possibly this might work for you.
http://www.onlinebearings.co.uk/loctite ... 16191.html

nerox · Post by **nerox** » Mon Nov 01, 2010 2:42 am

Thats great. thanks.

we use that loctite at work so its all good

quicksilvr · Post by **quicksilvr** » Thu Apr 28, 2011 5:30 pm

Are spark plug tube seals still a separate part number? I searched for 4777042AB, and didn't get anything.

Post by **occasional demons** » Mon May 02, 2011 7:57 pm

Still comes up at http://www.moparone.com/mopar-parts-catalog.html

They list them as sparkplug tubes, but they also list the tubes as sparkplug tubes, too.

List price is now $7.00

Post by **racer12306** » Mon May 02, 2011 8:09 pm

The Felpro set from RockAuto (includes the VC gasket, tube seals and grommets for the bolts) costs $19.75

Fel-pro Part #: VS50507R

Post by **occasional demons** » Tue May 03, 2011 9:46 am

racer12306 wrote:The Felpro set from RockAuto (includes the VC gasket, tube seals and grommets for the bolts) costs $19.75

Fel-pro Part #: VS50507R

This.

Even if you don't need the other parts, just mail them to me.

But it may still be cheaper getting them local, depends on shipping/coupons-with RA you may have.

Post by **racer12306** » Tue May 03, 2011 10:47 am

Looks like it's $5 to ship it on it's own.

I included it with my 100,000 parts so I paid ~$17 to ship all belts and hoses, WP, TB, etc, etc.