Part Number Request: Magnum intake manifold parts

Post Reply
TwistedTunerz
2GN Member
Posts: 250
Joined: Fri Oct 01, 2004 12:26 am
Location: St.Cloud,MN

Part Number Request: Magnum intake manifold parts

Post by TwistedTunerz » Wed Apr 22, 2009 12:19 pm

As the title said, bought an R/T kid thought it would get better performance by taking the butterfly plates out of the manifold, need to know if you can get the butterfly plates and screws and if so part numbers, still has everything else just no plates or screws. Thanks in advance
TwistedTunerz

occasional demons
Junior Admin
Posts: 19110
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Wed Apr 22, 2009 12:39 pm

Part Number: 4884065AE List Price $388.00 Fuel system - Fuel induction - Intake - Intake manifold Intake manifold, neon, sohc, all 2002


Part Number: 5018787AC List Price $266.00 Fuel system - Fuel induction - Intake - Intake manifold Intake manifold, neon, sohc, all, 2.0l, w/high output 2003 - 2005


Part Number: 4884094AB List Price $166.00 MOTOR MANIFOLD TUNIN


Part Number: 4884067AB List Price $12.10 GASKET INTAKE PLENUM


Part Number: 4648623AB List Price $4.65 Fuel system - Fuel induction - Intake - Manifold gasket Manifold gasket, neon, sohc, w/rt 2001 - 2005



Part Number: 6102041AA List Price $0.35 SCREW


Part Number: 6506575AA List Price $2.00 SCREW
IDK if the plates/screws are available seperately. Someone on here made their own. There is a post with pics/info, so with the right key words, a search might turn it up.
PM BRR or Dante, they may be able to get that info. And post that in here for future reference if you do obtain some info. :thumbup:
Bill
dblsg wrote:ya'll a bunch of post whores
epic

2001 Neon ES MTX with '02 R/T PCM
Help support 2GN!

User avatar
BlackRoseRacing
2009 Platinum Contributor
Posts: 12667
Joined: Sat Dec 25, 2004 8:58 am
Location: WNY
Contact:

Post by BlackRoseRacing » Sat May 02, 2009 5:31 am

butterfly plates and shaft are serviced with the lower manifold only :thumbup:
Image
Official "I'm Going to Drive My Neon till it Dies" Club #666

ragek23
2GN Member
Posts: 2476
Joined: Wed Sep 27, 2006 9:22 am
Location: Torrington, CT

Post by ragek23 » Tue Aug 18, 2009 12:20 am

whats the PN for the actuator motor?

2002 Neon SXT Sold
2006 EVO MR Weekend Warrior
2003 SRT 4 DD
-Kevin

Image

ZeroChad
2009 Gold Contributor
Posts: 3165
Joined: Sat Sep 01, 2007 11:08 pm
Location: Austin, Tx
Contact:

Post by ZeroChad » Tue Aug 18, 2009 1:26 am

I think the first page of my project log has pics of the ones I made. There is also a post talking about the correct screw size floating around somewhere.
Old Neon Log | Feedback

2000 - Corvette Coupe
2002 - Neon SE Fully Built (scrapped)

occasional demons
Junior Admin
Posts: 19110
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Tue Aug 18, 2009 9:48 am

ragek23 wrote:whats the PN for the actuator motor?
In the post above :D
Part Number: 4884094AB List Price $166.00 MOTOR MANIFOLD TUNIN
Bill
dblsg wrote:ya'll a bunch of post whores
epic

2001 Neon ES MTX with '02 R/T PCM
Help support 2GN!

Maddog
2GN Member
Posts: 445
Joined: Wed Feb 02, 2005 11:01 am
Location: SE WI 53170

Post by Maddog » Tue Aug 18, 2009 11:00 am

If someone with access can pull a screw from their Magnum IM, and measure the threads (I believe they are M6x1.00), the thread length, and the hex, you could probably take that info to a hardware store and get the screws for half or less than half that price. I'd do it now, but all my Mag IMs are at home :roll:

Also, FelPro sells the gasket set (plenum to runners, and runners to head) for around $6 - not sure if that is any better than OEM - I'm using it, and so far, it works fine.
If you go to a dealer, and tell them what you need, most are kind enough to write the P/Ns down for you. Just make sure you tell them that it is for the "F" code motor
'02 Flame Red SXR/T

(sorry, no link on banner)
Image

Complete Short Throw Shifters sold here! Custom work available!
PM or email aclnes55@yahoo.com for more information.

occasional demons
Junior Admin
Posts: 19110
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Tue Aug 18, 2009 11:54 am

I think ZeroChad was talking about the screws that hold the butterfly plates on. IIRC it was 3mm. I must not be entering the proper search terms, because I know the thread was/is out there.
Bill
dblsg wrote:ya'll a bunch of post whores
epic

2001 Neon ES MTX with '02 R/T PCM
Help support 2GN!

Maddog
2GN Member
Posts: 445
Joined: Wed Feb 02, 2005 11:01 am
Location: SE WI 53170

Post by Maddog » Tue Aug 18, 2009 4:11 pm

occasional demons wrote:I think ZeroChad was talking about the screws that hold the butterfly plates on. IIRC it was 3mm. I must not be entering the proper search terms, because I know the thread was/is out there.
Oh! #-o

I can get that info, too.
'02 Flame Red SXR/T

(sorry, no link on banner)
Image

Complete Short Throw Shifters sold here! Custom work available!
PM or email aclnes55@yahoo.com for more information.

ragek23
2GN Member
Posts: 2476
Joined: Wed Sep 27, 2006 9:22 am
Location: Torrington, CT

Post by ragek23 » Tue Aug 18, 2009 7:41 pm

damn thats soo expensive! I better just take the butterflies out for now.

2002 Neon SXT Sold
2006 EVO MR Weekend Warrior
2003 SRT 4 DD
-Kevin

Image

occasional demons
Junior Admin
Posts: 19110
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Wed Aug 19, 2009 8:12 am

Why? Just move them to the open position, and put some duct seal (putty) on the lever. It won't move, and it is easier to revert to normal operation when you can find a motor used/cheaper. You could remove the link spring from the motor and bolt it back on to keep things clean.
Bill
dblsg wrote:ya'll a bunch of post whores
epic

2001 Neon ES MTX with '02 R/T PCM
Help support 2GN!

ragek23
2GN Member
Posts: 2476
Joined: Wed Sep 27, 2006 9:22 am
Location: Torrington, CT

Post by ragek23 » Wed Aug 19, 2009 5:08 pm

good idea^

2002 Neon SXT Sold
2006 EVO MR Weekend Warrior
2003 SRT 4 DD
-Kevin

Image

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Thu Aug 20, 2009 1:28 pm

Just for reference, the part # for the screws that attach the MTV motor is 6101221...MSRP $1.00 each.

No size specs on them though :(

As it turns out, that same screw is used in other Chrysler products. It is used to hold the lower outer timing belt cover to the block on 01 and 02 2.4 Caravans, as well as attaching the front ABS sensors on Dakota and Durangos.
If I could just figure out how to meld the Outback and the Neon into one car...

Image

occasional demons
Junior Admin
Posts: 19110
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Fri Aug 21, 2009 4:59 pm

Plenum to runner screws: M6 x 1.00 x 25mm

MTV motor attaching screws: M6 x 1.00 x 12mm
Bill
dblsg wrote:ya'll a bunch of post whores
epic

2001 Neon ES MTX with '02 R/T PCM
Help support 2GN!

NickKo
2009 Gold Contributor
Posts: 2248
Joined: Sun Jun 11, 2006 11:24 am
Location: IL./WI.border

Post by NickKo » Sun Aug 23, 2009 12:21 am

occasional demons wrote:Plenum to runner screws: M6 x 1.00 x 25mm

MTV motor attaching screws: M6 x 1.00 x 12mm
Cool, Thanks !! :thumbup:

- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm

Official "I'm Going to Drive My Neon till it Dies" Club #000009

User avatar
INVUJerry
2GN Veteran
Posts: 6472
Joined: Mon Nov 21, 2005 9:55 pm
Location: Pasadena, MD
Contact:

MTV actuator motor?

Post by INVUJerry » Sun Jun 03, 2012 5:50 pm

Might have a line on a magnum intake, but the MTV solenoid is missing. I'd like to use it correctly so is it possible to get one of these seperately??
Image
So many neons so little time.

occasional demons
Junior Admin
Posts: 19110
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Sun Jun 03, 2012 10:29 pm

Yeah, but IIRC, the last of the oem stock is about gone.

4884094AB $174.00


viewtopic.php?t=41287
Bill
dblsg wrote:ya'll a bunch of post whores
epic

2001 Neon ES MTX with '02 R/T PCM
Help support 2GN!

User avatar
INVUJerry
2GN Veteran
Posts: 6472
Joined: Mon Nov 21, 2005 9:55 pm
Location: Pasadena, MD
Contact:

Post by INVUJerry » Mon Jun 04, 2012 3:56 pm

Jesus, $174. I just pooped.
Image
So many neons so little time.

User avatar
Adam G
2GN Member
Posts: 813
Joined: Fri Jul 07, 2006 8:21 pm
Location: etters, pa

Post by Adam G » Mon Jun 04, 2012 6:34 pm

ill sell you one for 150 its still on my mag manifold
Adam

04 eblue srt4 - shes getting there
97 white ram
81 white camaro z28

owned 11 neons so far and growing

User avatar
INVUJerry
2GN Veteran
Posts: 6472
Joined: Mon Nov 21, 2005 9:55 pm
Location: Pasadena, MD
Contact:

Post by INVUJerry » Tue Jun 05, 2012 3:35 pm

We'll see what happens Adam, might just do the trade deal then sell this slightly broken one and buy yours.
Image
So many neons so little time.

Post Reply

Return to “PN Engine”