Part Number Request: SRT-4 bedplate bolts

Post Reply
User avatar
sidepipe87
2009 Silver Contributor
Posts: 9489
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Part Number Request: SRT-4 bedplate bolts

Post by sidepipe87 » Mon Jul 18, 2011 1:53 pm

I managed to misplace one of the bedplate bolts. I believe they are th ones numbered 11-20 in the FSM. They are not the ones around the crank but the outer ones. It appears as though one is thicker than the rest? That is the one I lost.

JeffB#2
2GN Member
Posts: 428
Joined: Sun Jun 03, 2007 6:55 pm

Post by JeffB#2 » Mon Jul 18, 2011 5:51 pm

6504257 for "small" 8mm ones. All 2.4s use the same ones, 10 of them. Turbo and non-turbo, same bolts, "SRT-4" engine is nothing special.
BoogerMan
'95 Ply NYG ACR sedan 12.31 @ 111 all motor 2.4 swap - puked
'95 Ply NYG Sport Coupe 2.4 SOHC. Yes, 2.4 single cam.
'01 ACR Stone White
www.boogerbushings.com

Image

User avatar
sidepipe87
2009 Silver Contributor
Posts: 9489
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Post by sidepipe87 » Tue Jul 19, 2011 3:14 pm

Jeff, you are the man. Thanks again. :thumbup:
PM me for your 03+ PCM SKIM/VIN flashing needs. Neon PCMs Plus

JeffB#2
2GN Member
Posts: 428
Joined: Sun Jun 03, 2007 6:55 pm

Post by JeffB#2 » Tue Jul 19, 2011 5:26 pm

See if someone local has one laying around you can have?
BoogerMan
'95 Ply NYG ACR sedan 12.31 @ 111 all motor 2.4 swap - puked
'95 Ply NYG Sport Coupe 2.4 SOHC. Yes, 2.4 single cam.
'01 ACR Stone White
www.boogerbushings.com

Image

User avatar
sidepipe87
2009 Silver Contributor
Posts: 9489
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Post by sidepipe87 » Tue Jul 19, 2011 7:15 pm

I already have to order an oil pickup tube from the dealer, so I'll just have my dad order me one since he works there.
PM me for your 03+ PCM SKIM/VIN flashing needs. Neon PCMs Plus

Post Reply

Return to “PN Engine”