Part Number Request: SRT-4 bedplate bolts
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
Part Number Request: SRT-4 bedplate bolts
I managed to misplace one of the bedplate bolts. I believe they are th ones numbered 11-20 in the FSM. They are not the ones around the crank but the outer ones. It appears as though one is thicker than the rest? That is the one I lost.
6504257 for "small" 8mm ones. All 2.4s use the same ones, 10 of them. Turbo and non-turbo, same bolts, "SRT-4" engine is nothing special.
BoogerMan
'95 Ply NYG ACR sedan 12.31 @ 111 all motor 2.4 swap - puked
'95 Ply NYG Sport Coupe 2.4 SOHC. Yes, 2.4 single cam.
'01 ACR Stone White
www.boogerbushings.com
'95 Ply NYG ACR sedan 12.31 @ 111 all motor 2.4 swap - puked
'95 Ply NYG Sport Coupe 2.4 SOHC. Yes, 2.4 single cam.
'01 ACR Stone White
www.boogerbushings.com
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
See if someone local has one laying around you can have?
BoogerMan
'95 Ply NYG ACR sedan 12.31 @ 111 all motor 2.4 swap - puked
'95 Ply NYG Sport Coupe 2.4 SOHC. Yes, 2.4 single cam.
'01 ACR Stone White
www.boogerbushings.com
'95 Ply NYG ACR sedan 12.31 @ 111 all motor 2.4 swap - puked
'95 Ply NYG Sport Coupe 2.4 SOHC. Yes, 2.4 single cam.
'01 ACR Stone White
www.boogerbushings.com
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
I already have to order an oil pickup tube from the dealer, so I'll just have my dad order me one since he works there.
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus