Part Number Request: SRT-4 Valve Cover Bolts

sidepipe87 · Post by **sidepipe87** » Mon Mar 05, 2012 12:28 pm

Ok, I have what I believe are the part numbers for the SRT-4 valve cover bolts (found info on SRT Forums) but I can't for the life of me find out how many of each I need...

6507735AA (double threaded)
4621850AB (single threaded)

I have some but not all of the bolts. I just don't know how many single and double threaded I need to have. If this is listed somewhere, or even if someone has a clear picture, I'd appreciate it.

This is for an 04 btw, if it matters.

Post by **occasional demons** » Mon Mar 05, 2012 12:40 pm

What the parts show.

4621850AB 5 required M6x1.00x33.00
4693174AA 2 required

sidepipe87 · Post by **sidepipe87** » Mon Mar 05, 2012 12:45 pm

Thanks, Bill! Sounds about right.

sidepipe87 · Post by **sidepipe87** » Thu Mar 08, 2012 8:02 pm

FYI - haven't ordered these yet, but realized the quantities are wrong. There are 2 bolts in the center of the VC that they aren't accounting for for some reason...

Post by **occasional demons** » Thu Mar 08, 2012 8:09 pm

Edited the PN post above. Sorry, I was pushed for time when I posted it. I only copied/pasted what the parts list shows.

I think the 4693174AA are the middle ones, tho I can't promise that. I have nothing to go from, and the parts drawing didn't show the center bolts. I can't see there only being 5 for the perimeter either.

Should be 6?

sidepipe87 · Post by **sidepipe87** » Thu Mar 08, 2012 8:13 pm

6 for perimeter, 2 in center

Post by **occasional demons** » Thu Mar 08, 2012 8:16 pm

If you are ordering them locally, best to ask the parts person. Better safe than sorry.