Part Number Request: Clutch pedal bushing ?
Part Number Request: Clutch pedal bushing ?
This is for a 2005 SXT with manual 5 speed. I need the part number for the two axle seals.
And I need the part number for the bushing piece that connects the clutch pedal to the clutch master cylinder rod.. Its number 5 in the pic below I believe.. Thanks
[/img]
And I need the part number for the bushing piece that connects the clutch pedal to the clutch master cylinder rod.. Its number 5 in the pic below I believe.. Thanks
[/img]
Last edited by ltr450r on Sun Nov 21, 2010 2:01 pm, edited 1 time in total.
-Adrian
2003 SXT, MTX
2003 SXT, MTX
-
- Junior Admin
- Posts: 20312
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
4670265 BUSHING, Hydraulic Clutch Actuator $9.75
4761107 SEAL, Axle Drive Shaft
So, from the '01 parts listing:
4797334 SEAL AXLE DRIVE SHAFT $9.60
Pretty sure they are the same seal. Just verify with the parts guy. AFAIK, the t350, or axles haven't changed.
4761107 SEAL, Axle Drive Shaft
Part number 4761107 was superceded by part number CS04797334.
No Part Found $0.00
So, from the '01 parts listing:
4797334 SEAL AXLE DRIVE SHAFT $9.60
Pretty sure they are the same seal. Just verify with the parts guy. AFAIK, the t350, or axles haven't changed.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
PN Request: Clutch pedal bushin piece
I ordered number 5 in the picture but it was only the bushing. I need the piece (marked by green arrow ^^) that the bushing goes into. The screw #4 holds this piece on. Can you buy just this piece or do you have to buy the whole actuator?
THanks
-Adrian
2003 SXT, MTX
2003 SXT, MTX
-
- 2GN Member
- Posts: 393
- Joined: Fri Jan 11, 2008 3:12 pm
- Location: Quebec, Canada
-
- Junior Admin
- Posts: 20312
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Vendor on SRT forums: LCR but they may still be sold out also.
For questions or inquires feel free to email us at:
Sales@lepolesconceptsracing.com
Shop Phone: 330-221-4857
If you are sending us your parts or returning a core please ship to:
Lepoles Concepts Racing
2757 Shadley St.
Streetsboro, OH 4424
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
Gotta be careful with those. Juan bent two clutch master cylinder shafts using them, as have a lot of people on SRT forums. It is a known problem, but I don't know if they have a fix yet.
Which is sad cause I want it
*Edit* The above applies if it's the same part that MPx sells.
Which is sad cause I want it
*Edit* The above applies if it's the same part that MPx sells.
If I could just figure out how to meld the Outback and the Neon into one car...
-
- Junior Admin
- Posts: 20312
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
I believe LCR makes their own.
MPX doesn't carry them anymore.
This is what MPX used to sell:
viewtopic.php?t=43234
I can see where you may bend the master cylinder if you adjust it too far, and bottom the slave, before the master, or if the pressure plate has a heavy return force. I can't tell from the MPX pic if the centerline for the shaft is offset from the hole centerline like the stock part. I would like one too, as with the Spec, the plastic pivot flexes pretty good.
MPX doesn't carry them anymore.
This is what MPX used to sell:
viewtopic.php?t=43234
I can see where you may bend the master cylinder if you adjust it too far, and bottom the slave, before the master, or if the pressure plate has a heavy return force. I can't tell from the MPX pic if the centerline for the shaft is offset from the hole centerline like the stock part. I would like one too, as with the Spec, the plastic pivot flexes pretty good.
Last edited by occasional demons on Mon Nov 22, 2010 8:10 pm, edited 1 time in total.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
well the only other option is what? buy a new factory master cylinder? And Ragetek's is on back order until next year just so yall know. I haven't been able to get up with LCR to see if they have any.
edit: LCR is sold out for a while as well.. Looks like i'll be going back with the factory plastic
edit: LCR is sold out for a while as well.. Looks like i'll be going back with the factory plastic
-Adrian
2003 SXT, MTX
2003 SXT, MTX
-
- Junior Admin
- Posts: 20312
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Yep, you have to either source one from a JY, or buy a new master cylinder.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
-
- Junior Admin
- Posts: 20312
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Yeah, if it is going to bend the steel rod, it would have snapped the plastic end off anyways. Either way, you are buying a new MC.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
Bump.. Anyone know the pn for the little clip that sits inside of that part #5 for the srt?
www.JohnyR.net - Web development