Is this lifter tick or what? *NEW VIDEOS*

Have a video that you threw together of your Neon? Post them here. Videos not Neon related should be placed in the Off-Topic Media board.
Post Reply
supertrick_05
2GN Member
Posts: 4225
Joined: Thu Jul 21, 2005 9:09 pm
Location: Duluth, MN
Contact:

Is this lifter tick or what? *NEW VIDEOS*

Post by supertrick_05 » Fri Jun 15, 2012 11:51 pm

Hey guys, I'm back...with an '01 R/T with lots of miles (194K). I made a lil video of how the engine sounds. I guess I'm not real familiar on how Neons sound when they're not in PERFECT RUNNING shape like my old one, but it seems to run good...just has that "tick" that makes it sound like a diesel. It actually runs very smooth, but it sounds like crap. I don't really know.

Image

Also, here's another video of the acceleration under WOT...it's fighting to go, but just isn't there. It's not a clogged cat (had it tested) and it's not the air filter (just changed it for a new element). I don't really know what else it could be besides a fuel issue.

Image
Last edited by supertrick_05 on Sat Jun 30, 2012 12:56 am, edited 2 times in total.
-Brodie
Image
2002 Dodge Neon ACR - Needs LOTS of love, but I'm gonna slowly get her to where she deserves to be :)

User avatar
dvon17
2GN Member
Posts: 745
Joined: Fri Apr 13, 2012 5:20 am
Location: Michigan

Post by dvon17 » Sat Jun 16, 2012 12:50 am

Where's the video?

I wanna see if it sounds like mine lol.
2003 SRT-4 :D

:glasses4:
NEON PARABOLA wrote:you deserve respect dammit! you drive a neon!
"Cause even though you left me here, I have nothing left to fear. These are only walls that hold me here..."

supertrick_05
2GN Member
Posts: 4225
Joined: Thu Jul 21, 2005 9:09 pm
Location: Duluth, MN
Contact:

Post by supertrick_05 » Sat Jun 16, 2012 1:20 am

Oops! Idiot. Edited.
-Brodie
Image
2002 Dodge Neon ACR - Needs LOTS of love, but I'm gonna slowly get her to where she deserves to be :)

User avatar
dvon17
2GN Member
Posts: 745
Joined: Fri Apr 13, 2012 5:20 am
Location: Michigan

Post by dvon17 » Sat Jun 16, 2012 2:11 am

haha. that's exactly what mine sounds like.

I keep hearing "it's normal" and "your motor sounds fine" :roll:
2003 SRT-4 :D

:glasses4:
NEON PARABOLA wrote:you deserve respect dammit! you drive a neon!
"Cause even though you left me here, I have nothing left to fear. These are only walls that hold me here..."

Kelevra
2GN Member
Posts: 1399
Joined: Sun Apr 29, 2007 2:31 pm

Post by Kelevra » Sat Jun 16, 2012 4:29 am

That's exactly what mine sounded like too!

Till I took it in, insisted that something was wrong. they dropped the oil pan, found metal shavings, got a new short block. no more sound.

It's hard to tell from a video though. Some camera mics are more sensitive to higher pitched/louder sounds. to me, it sounds REALLY loud and doesn't sound like lifters to me. sounds more like a bad case of piston slap or possible rod knockage.

User avatar
Marcel
2GN Member
Posts: 395
Joined: Sun Feb 07, 2010 10:45 am
Location: where the Dutchies roam

Post by Marcel » Sat Jun 16, 2012 5:11 am

Kelevra wrote: It's hard to tell from a video though. Some camera mics are more sensitive to higher pitched/louder sounds. to me, it sounds REALLY loud and doesn't sound like lifters to me. sounds more like a bad case of piston slap or possible rod knockage.
totally agree.
"If god hates masturbation that much, he should give me a girlfriend"
http://www.sevenstepsofdenial.com
https://www.facebook.com/7StepsOfDenial
Official "I'm Going to Drive My Neon till it's too expensive to keep driving" Club #000083
Image

User avatar
dvon17
2GN Member
Posts: 745
Joined: Fri Apr 13, 2012 5:20 am
Location: Michigan

Post by dvon17 » Sat Jun 16, 2012 6:18 am

Honestly, I think if I wasn't used to hearing this noise myself, I'd think it was something worse. However, the fact that it ticks to the exact same rhythm as my motor, I can tell that it's the same as mine. The mic from his camera just makes it sound louder than it actually is.

It's loud, but it's not as loud as a rod knock. Trust me, I KNOW rod knocks (not my own car, luckily :lol: ).

I think I should take mine in as well and have them check for the metal shavings lol


edit** Well, idk. I listened to it about 10 more times and... it sounds a little worse. I'm not too familiar with motor internals so I can't suggest what it might be and it does sound a LITTLE worse than mine. It ticks to the same rhythm as I said above, but it sounds like it ticks ... "harder"? or ...idk. Shit, now I'm worried about my car all over again smh lol. I HAVE had it "listened" to by my mechanic (a guy whose opinion I really trust) and he said it doesn't sound too bad and that he gets Neons that sound worse) so idk.

hmm...
2003 SRT-4 :D

:glasses4:
NEON PARABOLA wrote:you deserve respect dammit! you drive a neon!
"Cause even though you left me here, I have nothing left to fear. These are only walls that hold me here..."

User avatar
JeffM
2GN Member
Posts: 3588
Joined: Tue Nov 04, 2008 8:02 pm
Location: Vermont

Post by JeffM » Sat Jun 16, 2012 9:21 am

Haaaaave you changed the oil yet, Brodie?
Image

LilSparkPlug
2GN Veteran
Posts: 12206
Joined: Thu Jan 10, 2008 4:49 pm
Location: RI

Post by LilSparkPlug » Sat Jun 16, 2012 9:21 am

That sounds like a combination of injector ticking with really bad piston slap, but it could be more than that I'm not sure. Like others have said, hard to tell from a video.

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Sat Jun 16, 2012 9:38 am

JeffM wrote:Haaaaave you changed the oil yet, Brodie?
:withstupid:

Change the oil and fill it up with 5qts of oil (not the 4.5 the manual tells you). Start it and see if it sounds different. If it's lifter tick, most (if not all of it) should go away. If not, it's more than likely piston slap or rod knock (if it's really loud).
If I could just figure out how to meld the Outback and the Neon into one car...

Image

User avatar
sidepipe87
2009 Silver Contributor
Posts: 9516
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Post by sidepipe87 » Sat Jun 16, 2012 9:56 am

sounds like some piston slap going on there.
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus

r/tguy02
2GN Member
Posts: 3644
Joined: Sat Jul 07, 2007 11:42 pm
Location: carlisle, pa.

Post by r/tguy02 » Sat Jun 16, 2012 10:29 am

:withstupid:
Justin
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823

User avatar
dvon17
2GN Member
Posts: 745
Joined: Fri Apr 13, 2012 5:20 am
Location: Michigan

Post by dvon17 » Sat Jun 16, 2012 11:52 am

see, mine always stops after I get my oil changed. And it'll be gone for like a day or so. Then it comes back.

They always fill it with 4.5qts too. Didn't know it was safe to do more than that. Guess I'll give it a try.
2003 SRT-4 :D

:glasses4:
NEON PARABOLA wrote:you deserve respect dammit! you drive a neon!
"Cause even though you left me here, I have nothing left to fear. These are only walls that hold me here..."

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Sat Jun 16, 2012 12:05 pm

I have always used 5 quarts, but that's me. Some people say that using an extra qt of oil will cause oil to come past the cam seals due to a rise in oil pressure, but I have never experienced that.

And like you, the lifter tick goes away for a few days after the oil change but then it's back. I've just come to accept it :(
If I could just figure out how to meld the Outback and the Neon into one car...

Image

occasional demons
Junior Admin
Posts: 20306
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Sat Jun 16, 2012 11:10 pm

lolz, I doubt an extra half quart of oil is going to make a difference in oil pressure. And if it did it would be less, due to aeration.
Bill
Olha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
2021 Forester

supertrick_05
2GN Member
Posts: 4225
Joined: Thu Jul 21, 2005 9:09 pm
Location: Duluth, MN
Contact:

Post by supertrick_05 » Sun Jun 17, 2012 8:40 am

Ok cool, thanks guys and Cam :) I'll make another video today with my Flip and maybe it's mic will pick up the sound better. As long as its not knock and something I should be worried about, thats all I care about. Still...I should probably change the oil anyways...even tho it looks pretty fresh. Any certain oil for high mileage cars that anyone recommends? Im going to dump a can of RESTORE in it...I swear by that stuff, and I know a bunch of other people do.
-Brodie
Image
2002 Dodge Neon ACR - Needs LOTS of love, but I'm gonna slowly get her to where she deserves to be :)

User avatar
BlackRoseRacing
2009 Platinum Contributor
Posts: 12737
Joined: Sat Dec 25, 2004 8:58 am

Post by BlackRoseRacing » Wed Jun 27, 2012 5:39 am

pull the valve cover off and check the rocker arms. a new local member here in WNY had the same issue and his intake rocker arm had a collapsed lifter causing the rocker shaft to slam every time it was actuated...just a thought

supertrick_05
2GN Member
Posts: 4225
Joined: Thu Jul 21, 2005 9:09 pm
Location: Duluth, MN
Contact:

Post by supertrick_05 » Wed Jun 27, 2012 6:40 am

My ex gf listened to it and she says its definitely knocking...but I think knocking sounds different, doesnt it?
-Brodie
Image
2002 Dodge Neon ACR - Needs LOTS of love, but I'm gonna slowly get her to where she deserves to be :)

User avatar
NGCnoproblem
2GN Member
Posts: 866
Joined: Wed May 09, 2012 1:32 am
Location: Buckley, WA

Post by NGCnoproblem » Wed Jun 27, 2012 12:17 pm

Mine makes a bad ticking sound every morning till it warms up. It's been doin it for a year and everyone I've asked thinks its just a bad Lifters or lash adjuster. I've seen on here a mod where you champher the spacers to let oil circulate better. It's also a tsb
Sorry for Party Rockin
Image

supertrick_05
2GN Member
Posts: 4225
Joined: Thu Jul 21, 2005 9:09 pm
Location: Duluth, MN
Contact:

Post by supertrick_05 » Sat Jun 30, 2012 9:06 am

BUMP for new videos.
-Brodie
Image
2002 Dodge Neon ACR - Needs LOTS of love, but I'm gonna slowly get her to where she deserves to be :)

Kelevra
2GN Member
Posts: 1399
Joined: Sun Apr 29, 2007 2:31 pm

Post by Kelevra » Sun Jul 08, 2012 11:40 pm

My vote is still rod knockage.

gilly02le
2GN Member
Posts: 1423
Joined: Fri Oct 27, 2006 12:13 am
Location: Kingston, Ontario, Canada
Contact:

Post by gilly02le » Mon Jul 09, 2012 11:48 am

yeah that's in the block. a local member just swapped in a new head and internals, no change in sound. still sounds like that, only slightly quieter.
wrist pins wear, and the pistons get sloppy. Seen it twice, both r/t motors interestingly, problem solved for both, after new blocks were installed. I'd check the lifters as well since its at lot easier, to be sure you have no issues there first, since its easy. But unfortunately i think its going to need a new block/rods/pistons.
New Sig Time.

supertrick_05
2GN Member
Posts: 4225
Joined: Thu Jul 21, 2005 9:09 pm
Location: Duluth, MN
Contact:

Post by supertrick_05 » Wed Jul 11, 2012 9:17 pm

I think I'm going to look for a 1GN DOHC and swap the Mag head/other components and freshen it up a little. Should be a fun experience and make a big difference!
-Brodie
Image
2002 Dodge Neon ACR - Needs LOTS of love, but I'm gonna slowly get her to where she deserves to be :)

gilly02le
2GN Member
Posts: 1423
Joined: Fri Oct 27, 2006 12:13 am
Location: Kingston, Ontario, Canada
Contact:

Post by gilly02le » Thu Jul 12, 2012 11:01 am

good plan, the car likely just wanted the extra power, that was its way of telling you, lol.
New Sig Time.

arnonefrank
n00b
Posts: 3
Joined: Mon Dec 24, 2012 9:04 pm

Post by arnonefrank » Mon Dec 24, 2012 9:09 pm

Thats no rod knock, its your rockers or lash adjusters. i have that sound on my car after i let off throttle. ive seen my bearings and that wasnt it.

chew*
2GN Member
Posts: 655
Joined: Thu Nov 17, 2011 12:14 am
Location: Rhode island

Post by chew* » Tue May 28, 2013 7:00 pm

Ive been drag racing mine for 2 years with that noise.

Swapped head with a low mileage 32k head/rocker/cam combo.

Noise didn't go away. It's bottom end.

Sounds like a diesel at drive throughs.

Ignore it till it blows.
If the parts car is cleaner rust wise than your car, swap the inner dash panels (VIN) and use the parts car with your title.
But don't street race..!!??

Post Reply

Return to “Video Post”