Part Number Request: Srt-4 rear Disc parts

Post Reply
Caraudioholic24
2GN Member
Posts: 4137
Joined: Sat Mar 22, 2008 1:56 am
Location: Cumberland R.I.

Part Number Request: Srt-4 rear Disc parts

Post by Caraudioholic24 » Thu Feb 11, 2010 12:31 pm

Ok so I am trying to put together an 05 Srt-4 rear disc brake setup and need a few part numbers.....


The 4 bolts that hold the Caliper Bracket to the spindle

The 4 small bolts that hold the dust cover on

Ebrake shoes adjuster (has the gear that manually adjusts the shoes)

Ebrake cable holder (the assy that holds the ebrake end and moves the shoes believe its two parts)

Thanks
Image

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Re: Srt-4 rear Disc parts

Post by Danteneon » Thu Feb 11, 2010 12:56 pm

Caraudioholic24 wrote:Ok so I am trying to put together an 05 Srt-4 rear disc brake setup and need a few part numbers.....


The 4 bolts that hold the Caliper Bracket to the spindle
Part #6503579...MSRP $1.85 each

The 4 small bolts that hold the dust cover on
Part #4723981...MSRP $6.45 each

Ebrake shoes adjuster (has the gear that manually adjusts the shoes)
Part #5015001AA...MSRP $5.10 each

Ebrake cable holder (the assy that holds the ebrake end and moves the shoes believe its two parts)
If by this you mean the lever that the cable clips into and is rivited to the shoe, then that isn't available by itself. It is part of the parking prake shoe.

Thanks
If I could just figure out how to meld the Outback and the Neon into one car...

Image

Caraudioholic24
2GN Member
Posts: 4137
Joined: Sat Mar 22, 2008 1:56 am
Location: Cumberland R.I.

Post by Caraudioholic24 » Thu Feb 11, 2010 1:15 pm

thats weird as it unclips from the shoes. I lied its one piece here is a pic of one that I have

Image
Image

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Thu Feb 11, 2010 1:20 pm

Is that off the drum brake set-up?
If I could just figure out how to meld the Outback and the Neon into one car...

Image

Caraudioholic24
2GN Member
Posts: 4137
Joined: Sat Mar 22, 2008 1:56 am
Location: Cumberland R.I.

Post by Caraudioholic24 » Thu Feb 11, 2010 1:24 pm

No thats off the srt setup. It slides into the parking brake shoes and when the cable pulls the lever it moves the shoes in and out. Its part of the parking brake
Image

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Thu Feb 11, 2010 1:41 pm

Well, here is what I found...

Image
1 - SHOE ACTUATOR LEVER
2 - SHIELD MOUNTING SCREWS
3 - REAR PARKING BRAKE CABLE

That picture is from the FSM. The parts catalog pictureis completely wrong. The only other part that it could be is...

Lever, Parking Brake Adjust
Passenger Side, Part #5073645AA...MSRP $21.95
Drivers Side, Part #5073648AA...MSRP $21.95
If I could just figure out how to meld the Outback and the Neon into one car...

Image

Caraudioholic24
2GN Member
Posts: 4137
Joined: Sat Mar 22, 2008 1:56 am
Location: Cumberland R.I.

Post by Caraudioholic24 » Thu Feb 11, 2010 1:54 pm

that would be it sir. Thanks a ton
Image

ZeroChad
2009 Gold Contributor
Posts: 3165
Joined: Sat Sep 01, 2007 11:08 pm
Location: Austin, Tx
Contact:

Post by ZeroChad » Thu Feb 11, 2010 2:28 pm

Rock auto sells a nice kit with new hardware for the parking brake too.

WAGNER Part # H7220 $13
Old Neon Log | Feedback

2000 - Corvette Coupe
2002 - Neon SE Fully Built (scrapped)

Caraudioholic24
2GN Member
Posts: 4137
Joined: Sat Mar 22, 2008 1:56 am
Location: Cumberland R.I.

Post by Caraudioholic24 » Thu Jan 20, 2011 2:09 am

ok i need to add...

part number for the "piston" itself. not sure if they sell a kit with all the gaskets and everything together to do the rebuild. the one i have managed to crack. Thanks
Image

occasional demons
Junior Admin
Posts: 20304
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Thu Jan 20, 2011 8:56 pm

Caraudioholic24 wrote:ok i need to add...

part number for the "piston" itself. not sure if they sell a kit with all the gaskets and everything together to do the rebuild. the one i have managed to crack. Thanks
4383878 1 PISTON, Brake, [BRD] [BRF] $50.20
4383879 1 BOOT, Brake Piston, [BRD] [BRF] $10.20
4383880 1 SEAL, Caliper Piston, [BRD] [BRF] $4.70


5011948AA PISTON PACKAGE, Disc Brake,[BR3] Contains; Piston, Boot, Seal 36mm $14.30 :tardbang:

There are three sales codes listed: [BRF]=ANTI-LOCK 4-WHEEL-DISC
[BR3]=ANTI-LOCK 4-WHEEL DISC [BRD]= 4-WHEEL DISC

Not sure which applies.



http://starparts.chrysler.com/starlibra ... brakes.pdf
Bill
Olha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
2021 Forester

Adi21
Fresh Fish
Posts: 1
Joined: Sat Sep 17, 2011 1:45 am

Post by Adi21 » Sat Sep 17, 2011 1:49 am

Thanks for share good posting!!!

Post Reply

Return to “PN Chassis”