Part Number Request: SRT4 Caliper Bracket Bolts

dbesade · Post by **dbesade** » Sat Dec 18, 2010 7:23 pm

P/N and Price Please?
-Don't ask what happened

Post by **occasional demons** » Sat Dec 18, 2010 7:43 pm

Item 13: 6505832AA (4) BOLT, Hex Flange Head, Caliper
Bracket to Knuckle $1.85

dbesade · Post by **dbesade** » Sat Dec 18, 2010 8:42 pm

occasional demons wrote:Item 13: 6505832AA (4) BOLT, Hex Flange Head, Caliper
Bracket to Knuckle $1.85

By chance have a bolt size/pitch?

Post by **occasional demons** » Sat Dec 18, 2010 10:01 pm

Nope, that is the copied/pasted description. The older part catalogs would give that info.

If you have the remains? you could match it at a hardware, if you have one available. Not sure what the grade spec is tho. Prolly want 8.8 or higher tho.

dbesade · Post by **dbesade** » Sat Dec 18, 2010 11:32 pm

occasional demons wrote:Nope, that is the copied/pasted description. The older part catalogs would give that info.

If you have the remains? you could match it at a hardware, if you have one available. Not sure what the grade spec is tho. Prolly want 8.8 or higher tho.

I don't, it backed out while I was driving, almost caused a fatal accident at 70MPH ... amazing what happens to a caliper when it slams into the wheel ... I was lucky, on the offramp.

-Dave

sidepipe87 · Post by **sidepipe87** » Mon Jun 04, 2012 12:18 pm

I need to find the part number for the SRT front caliper support bolts. There are 2 per side and somehow I have 3... must've used that bolt elsewhere. Oops

Danteneon · Post by **Danteneon** » Mon Jun 04, 2012 12:20 pm

Are you talking about this one?

viewtopic.php?t=54579

sidepipe87 · Post by **sidepipe87** » Mon Jun 04, 2012 12:43 pm

Item 13: 6505832AA (4) BOLT, Hex Flange Head, Caliper
Bracket to Knuckle $1.85

That is it! I searched caliper support bolt, that's why I didn't find it. You are a savior!

sidepipe87 · Post by **sidepipe87** » Fri Jul 13, 2012 10:45 am

FYI - I ordered 6505832AA from the dealer and installed in the caliper support. Right before Carlisle I had a bad front wheel bearing so I replaced them both. When I took the pass side caliper support off, the new bolts tip looked like it was sheared off... wtf?, I thought. I pulled the brand new rotor off and the inside edge was BADLY gouged from where the bolt was too long and rubbed against the rotor

After investigating, the new bolt had part of the shank and the tip without threads whereas the original did not so it was longer. I cut the rest off with a grinder. So I'm not sure if they gave me the wrong bolt or the PN is wrong but I just wanted to post up and let people know

Post by **occasional demons** » Fri Jul 13, 2012 11:54 am

Possible the wrong bolt was packaged. They should stop flush/below with the rotor side.

I guess check the rotor clearance before driving. I'm surprised it didn't make enough noise to hear it. Kinda scary.

r/tguy02 · Post by **r/tguy02** » Wed Jan 23, 2013 7:31 am

can someone tell me the part number/price for #11 on that diagram please?

Post by **occasional demons** » Wed Jan 23, 2013 9:24 am

5104757AA BRACKET, Brake Caliper, [BR3] List Price: $128.00

r/tguy02 · Post by **r/tguy02** » Wed Jan 23, 2013 10:55 am

thanks bill

Post by **occasional demons** » Wed Jan 23, 2013 12:17 pm