Sway bar part numbers and sizes..

Post Reply
User avatar
Canada
Junior Admin
Posts: 4815
Joined: Tue Jun 28, 2005 4:05 pm
Location: Island Grove, Ontario, Canada

Sway bar part numbers and sizes..

Post by Canada » Tue Jan 24, 2006 12:34 am

BRR or Diablo, could you please post the P/N's for the factory sway bars (with their diameters) to fit our cars :D

R/T=
SRT4=
SRT4 ACR=
PT GT=

User avatar
BlackRoseRacing
2009 Platinum Contributor
Posts: 12666
Joined: Sat Dec 25, 2004 8:58 am
Location: WNY
Contact:

Post by BlackRoseRacing » Wed Jan 25, 2006 6:11 am

part numbers are not a problem its the sizing that I cant help you with...
Image
Official "I'm Going to Drive My Neon till it Dies" Club #666

User avatar
Canada
Junior Admin
Posts: 4815
Joined: Tue Jun 28, 2005 4:05 pm
Location: Island Grove, Ontario, Canada

Post by Canada » Wed Feb 08, 2006 11:16 pm

bump for P/N's

neonpla
2GN Member
Posts: 2571
Joined: Tue Aug 03, 2004 2:27 am
Location: Killeen, TX

Post by neonpla » Tue Feb 28, 2006 6:45 am

www.moparsupercenter.com - go there and look.. your welcome
2008 Jeep Wrangler Unlimited
2005 Dodge Neon SRT4

User avatar
04sxt2.0
2GN Member
Posts: 640
Joined: Sun Apr 03, 2005 10:02 pm
Location: Chicopee, Ma

Post by 04sxt2.0 » Tue Feb 28, 2006 6:59 am

srt -4 sway bars for the rear i think are 17mm.. running on right now on my car. i think the front is 21mm not to surehave one but isn't in yet.

the PT cruiser and the PT GT have completely different suspension in the rear. the front setup is the same but the rear is a solid rear axle set up instead of the independent that the neons have.
Image

04 SXT- daily driver
93 GSX-16g turbo,dsmlink v3, bored 0.40 over 2g maf, ported head. Toy

CAI, lorenzo 60mm throttle body, B&m short shifter, SRT exhaust, 32" glass pack.

upcoming mods, RT manifold, UDP, and ODP,

Wisher2
2GN Member
Posts: 710
Joined: Wed Oct 12, 2005 12:35 pm
Location: CALIFORNIA

Post by Wisher2 » Tue Feb 28, 2006 10:18 am

Sport Suspension Specifics Spring Rate (Front) 150 lbs/in
Spring Rate (Rear) 120 lbs/in
Front Sway Bar 22 mm
Rear Sway Bar 16 mm
Steering Ratio 18:1 (firm feel power assist)
Struts Stiffer (Tokico)

Competition Suspension Specifics Spring Rate (Front) 150 lbs/in
Spring Rate (Rear) 120 lbs/in
Front Sway Bar 22 mm
Rear Sway Bar 19 mm
Steering Ratio 18:1 ( firm feel power assist)
Struts Very Stiff; Double Adjustable; inverted Dynamic Suspensions)

These are the dimensions for the R/T and ACR respectively....
I am not to sure about the SRT or PT but you can also look at this site for part #s

https://www.dodgeparts.com/oe_parts_cat ... f9e1f426a4

User avatar
dawm
2GN Member
Posts: 1867
Joined: Mon Dec 20, 2004 8:50 pm
Location: Wayne, MI
Contact:

Post by dawm » Sat Mar 04, 2006 7:20 pm

SRT-4
front 24mm
rear 17mm
12 Subaru WRX hatch - #notadowngrade
04 Neon - #base2SRT #24NAprojectgoneSRT
03 Subaru Forester 2.5XS - #gfscar #butiown
06 Subaru WRX STi - #traded4hatchback12WRX #gone
98 Neon R/T 2.4L Turbo Coupe - #7yearproject #SRTified #megasquirt
http://www.st1ck3rs.com
http://www.detroitneonowners.org

User avatar
tamadrumr88
2GN Member
Posts: 2318
Joined: Thu Nov 18, 2004 10:50 pm
Location: lehigh valley pa

Post by tamadrumr88 » Sat Mar 04, 2006 7:47 pm

srt spring rate: 175 front, 125 rear

User avatar
Diablo0
2GN.org Owner/Admin
Posts: 12564
Joined: Thu Apr 15, 2004 11:20 pm
Location: Greenville, SC
Contact:

Post by Diablo0 » Sat Mar 04, 2006 10:05 pm

Okay... here we go... all these parts are according to StarParts based on VINs I found on cars through eBay and my own R/T and SRT-4 donor car.

R/T:
Front - 4656856AA
Rear - 4656855AA

Neon ACR:
Front - 5272327
Rear - 4656855AA

SRT-4:
Front - 5290874AA
Rear - 4656511AB

SRT-4 ACR:
Front - 5085656AA
Rear - No Part Number Shown

PT GT Convertible:
Front - 5272535AA
*This is where I get confused... people on SRTforums order the 5085656AA part number saying its for the PT which it is but doesnt' list under the GT Cruiser Conv VIN... only under the SDF and SDD package group and I can't find what that package is called :-? *
-Jason
Black '02 Neon R/T | White '02 Neon R/T - SRT-4 Engine Swap
Image
^^^ no, that isn't what I look like haha
Try not to become a man of success but rather to become a man of value. - Albert Einstein

User avatar
Canada
Junior Admin
Posts: 4815
Joined: Tue Jun 28, 2005 4:05 pm
Location: Island Grove, Ontario, Canada

Post by Canada » Sat Mar 11, 2006 2:59 pm

Thanks Very Much Jason!

esteinmaier
Supporting Vendor
Posts: 3324
Joined: Fri Dec 09, 2005 3:40 pm

Post by esteinmaier » Tue Apr 04, 2006 4:45 pm

Can ya sticky this pls?
ASP - First NGC SOHC in the 13s and the 12s. First SOHC neon over 500whp. First NGC Neon on MS.
Winston Churchill wrote:Yes, Madam, I am drunk, but in the morning I shall be sober and you will still be ugly.

User avatar
BlackRoseRacing
2009 Platinum Contributor
Posts: 12666
Joined: Sat Dec 25, 2004 8:58 am
Location: WNY
Contact:

Post by BlackRoseRacing » Tue Apr 04, 2006 6:53 pm

I could have done that myself, but the only problem is the actual sizing...MP has stage 1 kits that are based like so:

Neon - P4510457 - un posted diameters...
SRT-4 - P4510454 - 26mm front 19mm rear
PT Non-Turbo - P4510261 25.4 front 19mm rear
PT Turbo - P4510455 - 27mm front 19mm rear

All the above is found at mopar.com...
Image
Official "I'm Going to Drive My Neon till it Dies" Club #666

User avatar
jmr
2GN Member
Posts: 227
Joined: Thu Feb 01, 2007 11:04 pm
Location: STL, MO

Post by jmr » Mon Apr 28, 2008 10:24 pm

Suspension Codes:

SDB = Heavy Duty swaybar F/R 20mm/13mm
SDC = Touring swaybar F/R 22mm/NA
SDD = Performance PT-GT
SDE = Sport (R/T) swaybar F/R 22mm/19mm
SDF = Euro swaybar F/R 22mm/17mm
SDK = Competion (ACR non SRT) swaybar F/R 22mm/19mm
SDX = High Performance (SRT) swaybar F/R 24mm/17mm
SRT-ACR swaybar F/R 26mm/19mm

PT-GT Conv 26mm Front Bar for SDF suspension 5085656AA
PT-GT Conv 26mm Front Bar Bushing 2 needed 5272646AA
Image
05 Inferno Red SXT: SRT-Design,MTX,SRT Rear Disc,Mopar VC,K&N Filter
05 Orange Blast SXT: SRT-Design,ATX,SRT Rear Disc,K&N Filter
09 Challenger R/T Deep Water Blue: 24F Pkg, K&N Filter,Mopar Hood Scoop Ducts

User avatar
nerox
2011 Silver Contributor
Posts: 939
Joined: Sun Dec 20, 2009 10:51 am
Location: United Kingdom

Post by nerox » Tue Oct 02, 2012 2:27 pm

i wonder if UK R/T's would fall under:

SDE = Sport (R/T) swaybar F/R 22mm/19mm

Or ..

SDF = Euro swaybar F/R 22mm/17mm
Official "I'm gonna drive my Neon until it dies" Club Member UK#1

Image

Post Reply

Return to “PN Chassis”