Sway bar part numbers and sizes..

Post by **Canada** » Tue Jan 24, 2006 12:34 am

BRR or Diablo, could you please post the P/N's for the factory sway bars (with their diameters) to fit our cars

R/T=
SRT4=
SRT4 ACR=
PT GT=

BlackRoseRacing · Post by **BlackRoseRacing** » Wed Jan 25, 2006 6:11 am

part numbers are not a problem its the sizing that I cant help you with...

Post by **Canada** » Wed Feb 08, 2006 11:16 pm

bump for P/N's

neonpla · Post by **neonpla** » Tue Feb 28, 2006 6:45 am

www.moparsupercenter.com - go there and look.. your welcome

04sxt2.0 · Post by **04sxt2.0** » Tue Feb 28, 2006 6:59 am

srt -4 sway bars for the rear i think are 17mm.. running on right now on my car. i think the front is 21mm not to surehave one but isn't in yet.

the PT cruiser and the PT GT have completely different suspension in the rear. the front setup is the same but the rear is a solid rear axle set up instead of the independent that the neons have.

Wisher2 · Post by **Wisher2** » Tue Feb 28, 2006 10:18 am

Sport Suspension Specifics Spring Rate (Front) 150 lbs/in
Spring Rate (Rear) 120 lbs/in
Front Sway Bar 22 mm
Rear Sway Bar 16 mm
Steering Ratio 18:1 (firm feel power assist)
Struts Stiffer (Tokico)

Competition Suspension Specifics Spring Rate (Front) 150 lbs/in
Spring Rate (Rear) 120 lbs/in
Front Sway Bar 22 mm
Rear Sway Bar 19 mm
Steering Ratio 18:1 ( firm feel power assist)
Struts Very Stiff; Double Adjustable; inverted Dynamic Suspensions)

These are the dimensions for the R/T and ACR respectively....
I am not to sure about the SRT or PT but you can also look at this site for part #s

https://www.dodgeparts.com/oe_parts_cat ... f9e1f426a4

dawm · Post by **dawm** » Sat Mar 04, 2006 7:20 pm

SRT-4
front 24mm
rear 17mm

tamadrumr88 · Post by **tamadrumr88** » Sat Mar 04, 2006 7:47 pm

srt spring rate: 175 front, 125 rear

Post by **Diablo0** » Sat Mar 04, 2006 10:05 pm

Okay... here we go... all these parts are according to StarParts based on VINs I found on cars through eBay and my own R/T and SRT-4 donor car.

R/T:
Front - 4656856AA
Rear - 4656855AA

Neon ACR:
Front - 5272327
Rear - 4656855AA

SRT-4:
Front - 5290874AA
Rear - 4656511AB

SRT-4 ACR:
Front - 5085656AA
Rear - No Part Number Shown

PT GT Convertible:
Front - 5272535AA
*This is where I get confused... people on SRTforums order the 5085656AA part number saying its for the PT which it is but doesnt' list under the GT Cruiser Conv VIN... only under the SDF and SDD package group and I can't find what that package is called

*

Post by **Canada** » Sat Mar 11, 2006 2:59 pm

Thanks Very Much Jason!

esteinmaier · Post by **esteinmaier** » Tue Apr 04, 2006 4:45 pm

Can ya sticky this pls?

BlackRoseRacing · Post by **BlackRoseRacing** » Tue Apr 04, 2006 6:53 pm

I could have done that myself, but the only problem is the actual sizing...MP has stage 1 kits that are based like so:

Neon - P4510457 - un posted diameters...
SRT-4 - P4510454 - 26mm front 19mm rear
PT Non-Turbo - P4510261 25.4 front 19mm rear
PT Turbo - P4510455 - 27mm front 19mm rear

All the above is found at mopar.com...

jmr · Post by **jmr** » Mon Apr 28, 2008 10:24 pm

Suspension Codes:

SDB = Heavy Duty swaybar F/R 20mm/13mm
SDC = Touring swaybar F/R 22mm/NA
SDD = Performance PT-GT
SDE = Sport (R/T) swaybar F/R 22mm/19mm
SDF = Euro swaybar F/R 22mm/17mm
SDK = Competion (ACR non SRT) swaybar F/R 22mm/19mm
SDX = High Performance (SRT) swaybar F/R 24mm/17mm
SRT-ACR swaybar F/R 26mm/19mm

PT-GT Conv 26mm Front Bar for SDF suspension 5085656AA
PT-GT Conv 26mm Front Bar Bushing 2 needed 5272646AA

nerox · Post by **nerox** » Tue Oct 02, 2012 2:27 pm

i wonder if UK R/T's would fall under:

SDE = Sport (R/T) swaybar F/R 22mm/19mm

Or ..

SDF = Euro swaybar F/R 22mm/17mm

HenryEasef · Post by **HenryEasef** » Mon Mar 18, 2019 8:02 am

I need to source a front sway bar bushing and link bushing kit. Would like to go with ac delco if possible