Sway bar part numbers and sizes..
- Canada
- Junior Admin
- Posts: 4816
- Joined: Tue Jun 28, 2005 4:05 pm
- Location: Island Grove, Ontario, Canada
Sway bar part numbers and sizes..
BRR or Diablo, could you please post the P/N's for the factory sway bars (with their diameters) to fit our cars
R/T=
SRT4=
SRT4 ACR=
PT GT=
R/T=
SRT4=
SRT4 ACR=
PT GT=
- BlackRoseRacing
- 2009 Platinum Contributor
- Posts: 12737
- Joined: Sat Dec 25, 2004 8:58 am
www.moparsupercenter.com - go there and look.. your welcome
2008 Jeep Wrangler Unlimited
2005 Dodge Neon SRT4
2005 Dodge Neon SRT4
srt -4 sway bars for the rear i think are 17mm.. running on right now on my car. i think the front is 21mm not to surehave one but isn't in yet.
the PT cruiser and the PT GT have completely different suspension in the rear. the front setup is the same but the rear is a solid rear axle set up instead of the independent that the neons have.
the PT cruiser and the PT GT have completely different suspension in the rear. the front setup is the same but the rear is a solid rear axle set up instead of the independent that the neons have.
04 SXT- daily driver
93 GSX-16g turbo,dsmlink v3, bored 0.40 over 2g maf, ported head. Toy
CAI, lorenzo 60mm throttle body, B&m short shifter, SRT exhaust, 32" glass pack.
upcoming mods, RT manifold, UDP, and ODP,
Sport Suspension Specifics Spring Rate (Front) 150 lbs/in
Spring Rate (Rear) 120 lbs/in
Front Sway Bar 22 mm
Rear Sway Bar 16 mm
Steering Ratio 18:1 (firm feel power assist)
Struts Stiffer (Tokico)
Competition Suspension Specifics Spring Rate (Front) 150 lbs/in
Spring Rate (Rear) 120 lbs/in
Front Sway Bar 22 mm
Rear Sway Bar 19 mm
Steering Ratio 18:1 ( firm feel power assist)
Struts Very Stiff; Double Adjustable; inverted Dynamic Suspensions)
These are the dimensions for the R/T and ACR respectively....
I am not to sure about the SRT or PT but you can also look at this site for part #s
https://www.dodgeparts.com/oe_parts_cat ... f9e1f426a4
Spring Rate (Rear) 120 lbs/in
Front Sway Bar 22 mm
Rear Sway Bar 16 mm
Steering Ratio 18:1 (firm feel power assist)
Struts Stiffer (Tokico)
Competition Suspension Specifics Spring Rate (Front) 150 lbs/in
Spring Rate (Rear) 120 lbs/in
Front Sway Bar 22 mm
Rear Sway Bar 19 mm
Steering Ratio 18:1 ( firm feel power assist)
Struts Very Stiff; Double Adjustable; inverted Dynamic Suspensions)
These are the dimensions for the R/T and ACR respectively....
I am not to sure about the SRT or PT but you can also look at this site for part #s
https://www.dodgeparts.com/oe_parts_cat ... f9e1f426a4
SRT-4
front 24mm
rear 17mm
front 24mm
rear 17mm
12 Subaru WRX hatch - #notadowngrade
04 Neon - #base2SRT #24NAprojectgoneSRT
03 Subaru Forester 2.5XS - #gfscar #butiown
06 Subaru WRX STi - #traded4hatchback12WRX #gone
98 Neon R/T 2.4L Turbo Coupe - #7yearproject #SRTified #megasquirt
http://www.st1ck3rs.com
http://www.detroitneonowners.org
04 Neon - #base2SRT #24NAprojectgoneSRT
03 Subaru Forester 2.5XS - #gfscar #butiown
06 Subaru WRX STi - #traded4hatchback12WRX #gone
98 Neon R/T 2.4L Turbo Coupe - #7yearproject #SRTified #megasquirt
http://www.st1ck3rs.com
http://www.detroitneonowners.org
- tamadrumr88
- 2GN Member
- Posts: 2318
- Joined: Thu Nov 18, 2004 10:50 pm
- Location: lehigh valley pa
- Diablo0
- 2GN.org Owner/Admin
- Posts: 12576
- Joined: Thu Apr 15, 2004 11:20 pm
- Location: Greenville, SC
- Contact:
Okay... here we go... all these parts are according to StarParts based on VINs I found on cars through eBay and my own R/T and SRT-4 donor car.
R/T:
Front - 4656856AA
Rear - 4656855AA
Neon ACR:
Front - 5272327
Rear - 4656855AA
SRT-4:
Front - 5290874AA
Rear - 4656511AB
SRT-4 ACR:
Front - 5085656AA
Rear - No Part Number Shown
PT GT Convertible:
Front - 5272535AA
*This is where I get confused... people on SRTforums order the 5085656AA part number saying its for the PT which it is but doesnt' list under the GT Cruiser Conv VIN... only under the SDF and SDD package group and I can't find what that package is called *
R/T:
Front - 4656856AA
Rear - 4656855AA
Neon ACR:
Front - 5272327
Rear - 4656855AA
SRT-4:
Front - 5290874AA
Rear - 4656511AB
SRT-4 ACR:
Front - 5085656AA
Rear - No Part Number Shown
PT GT Convertible:
Front - 5272535AA
*This is where I get confused... people on SRTforums order the 5085656AA part number saying its for the PT which it is but doesnt' list under the GT Cruiser Conv VIN... only under the SDF and SDD package group and I can't find what that package is called *
-Jason
Black '02 Neon R/T | White '02 Neon R/T - SRT-4 Engine Swap
^^^ no, that isn't what I look like haha
Try not to become a man of success but rather to become a man of value. - Albert Einstein
Black '02 Neon R/T | White '02 Neon R/T - SRT-4 Engine Swap
^^^ no, that isn't what I look like haha
Try not to become a man of success but rather to become a man of value. - Albert Einstein
-
- Supporting Vendor
- Posts: 3324
- Joined: Fri Dec 09, 2005 3:40 pm
- BlackRoseRacing
- 2009 Platinum Contributor
- Posts: 12737
- Joined: Sat Dec 25, 2004 8:58 am
I could have done that myself, but the only problem is the actual sizing...MP has stage 1 kits that are based like so:
Neon - P4510457 - un posted diameters...
SRT-4 - P4510454 - 26mm front 19mm rear
PT Non-Turbo - P4510261 25.4 front 19mm rear
PT Turbo - P4510455 - 27mm front 19mm rear
All the above is found at mopar.com...
Neon - P4510457 - un posted diameters...
SRT-4 - P4510454 - 26mm front 19mm rear
PT Non-Turbo - P4510261 25.4 front 19mm rear
PT Turbo - P4510455 - 27mm front 19mm rear
All the above is found at mopar.com...
Suspension Codes:
SDB = Heavy Duty swaybar F/R 20mm/13mm
SDC = Touring swaybar F/R 22mm/NA
SDD = Performance PT-GT
SDE = Sport (R/T) swaybar F/R 22mm/19mm
SDF = Euro swaybar F/R 22mm/17mm
SDK = Competion (ACR non SRT) swaybar F/R 22mm/19mm
SDX = High Performance (SRT) swaybar F/R 24mm/17mm
SRT-ACR swaybar F/R 26mm/19mm
PT-GT Conv 26mm Front Bar for SDF suspension 5085656AA
PT-GT Conv 26mm Front Bar Bushing 2 needed 5272646AA
SDB = Heavy Duty swaybar F/R 20mm/13mm
SDC = Touring swaybar F/R 22mm/NA
SDD = Performance PT-GT
SDE = Sport (R/T) swaybar F/R 22mm/19mm
SDF = Euro swaybar F/R 22mm/17mm
SDK = Competion (ACR non SRT) swaybar F/R 22mm/19mm
SDX = High Performance (SRT) swaybar F/R 24mm/17mm
SRT-ACR swaybar F/R 26mm/19mm
PT-GT Conv 26mm Front Bar for SDF suspension 5085656AA
PT-GT Conv 26mm Front Bar Bushing 2 needed 5272646AA
05 Inferno Red SXT: SRT-Design,MTX,SRT Rear Disc,Mopar VC,K&N Filter
05 Orange Blast SXT: SRT-Design,ATX,SRT Rear Disc,K&N Filter
09 Challenger R/T Deep Water Blue: 24F Pkg, K&N Filter,Mopar Hood Scoop Ducts
-
- n00b
- Posts: 4
- Joined: Mon Mar 04, 2019 6:44 pm
Sway bar part numbers and sizes
I need to source a front sway bar bushing and link bushing kit. Would like to go with ac delco if possible