Part Number Request: Subframe/Crossmember/K frame
-
- n00b
- Posts: 2
- Joined: Thu Jul 12, 2012 3:00 pm
Part Number Request: Subframe/Crossmember/K frame
I need the part number for a 2000 Neon subframe. Unless anyone knows if I can use a 2003 subframe in a 2000 without major modifications.
The part number for a 2003 is different, but As Far As I Know, it will bolt right up, like it grew there.
Chrysler 'superseded' the older K-frame p/n's with newer, 'revised' versions.
I thought I read somewhere here, that the 'revised' newer part numbers are either stronger or have better corrosion protection.
I'll wait for Bill to chime in......
- Nick
Chrysler 'superseded' the older K-frame p/n's with newer, 'revised' versions.
I thought I read somewhere here, that the 'revised' newer part numbers are either stronger or have better corrosion protection.
I'll wait for Bill to chime in......
- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Mopar's correct name is "Crossmember"occasional demons wrote:They are all the same fit wise. The differences are in the bracing underneath.
2.0
5272341AA '00/'01 $582.00 superceded from 5272238AE ('00)5272238AG ('01)
5272341AB '02 $757.00
5272341AC '03 $352.00
5272341AF '04/'05 $407.00
2.4
5290203AB '03/'04 $752.00
5290203AC '05 $814.00
Prices may not be current.... OK most likely Not.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
the revised version is basically the same except for the webbing that goes across the bottom of the k frame (where it would usually rust out). the revised newer version just hase a couple web pieces welded to the bottom, unlike the older versions which had an intricate plate with holes there that would retain water and rust out easily.NickKo wrote:The part number for a 2003 is different, but As Far As I Know, it will bolt right up, like it grew there.
Chrysler 'superseded' the older K-frame p/n's with newer, 'revised' versions.
I thought I read somewhere here, that the 'revised' newer part numbers are either stronger or have better corrosion protection.
I'll wait for Bill to chime in......
- Nick
Justin
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823
That's it. I just couldn't remember what it was.r/tguy02 wrote:
the revised version is basically the same except for the webbing that goes across the bottom of the k frame (where it would usually rust out). the revised newer version just hase a couple web pieces welded to the bottom, unlike the older versions which had an intricate plate with holes there that would retain water and rust out easily.
Thanks for the info !
- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Psh, they rust anyways. I put a zillion coats of paint on the new one I bought, and it is rusting through that.
Damn things must have been rusting when they painted them.
Even the newer cars have the same problem. My Mom's 2007 Caliber's cross member is rusting very nicely.
Damn things must have been rusting when they painted them.
Even the newer cars have the same problem. My Mom's 2007 Caliber's cross member is rusting very nicely.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
This is a good place to use POR-15.occasional demons wrote:Psh, they rust anyways. I put a zillion coats of paint on the new one I bought, and it is rusting through that.
Damn things must have been rusting when they painted them.
Even the newer cars have the same problem. My Mom's 2007 Caliber's cross member is rusting very nicely.
I will have to do mine soon, while I still have a K-frame to paint.......
http://www.por15.com/POR-15-Rust-Preven ... roducts/1/
- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
anyone know the actual purpose of said webbing?r/tguy02 wrote: the revised version is basically the same except for the webbing that goes across the bottom of the k frame (where it would usually rust out). the revised newer version just hase a couple web pieces welded to the bottom, unlike the older versions which had an intricate plate with holes there that would retain water and rust out easily.
Official "I'm gonna drive my Neon until it dies" Club Member UK#1
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
For reinforcement; keeps it from deflecting in or out.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester