Part Number Request: Neon only STS (Not SRT version)

Post Reply
mrgto68
2GN Member
Posts: 428
Joined: Tue Feb 10, 2009 6:48 pm
Location: Bethesda, MD

Part Number Request: Neon only STS (Not SRT version)

Post by mrgto68 » Sun Nov 07, 2010 10:50 pm

Want to Buy - I am looking for the part number for the Neon only STS. I don't want the version for the SRT-4 but the one that works with the stock Neon shift knob. I know it exists because I already have one in my 02 ACR. Looking to locate another one and a part # would be very helpful.
Last edited by mrgto68 on Wed Nov 10, 2010 6:49 pm, edited 1 time in total.
Feedback Thread:

viewtopic.php?t=44701

occasional demons
Junior Admin
Posts: 20097
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Sun Nov 07, 2010 11:16 pm

4668261AC is the only oem shifter listed for non SRT. Aftermarket would be the only option that would be there.

And whether or not there is one that fits the oem knob (other than Maddog), you will have to wait for someone else to chime in.
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap

mrgto68
2GN Member
Posts: 428
Joined: Tue Feb 10, 2009 6:48 pm
Location: Bethesda, MD

Post by mrgto68 » Wed Nov 17, 2010 2:32 pm

occasional demons wrote:4668261AC is the only oem shifter listed for non SRT. Aftermarket would be the only option that would be there.

And whether or not there is one that fits the oem knob (other than Maddog), you will have to wait for someone else to chime in.
I wonder if that is the same unit used for the 1GN cars? What years does it list as applicable to? and price?
Feedback Thread:

viewtopic.php?t=44701

r/tguy02
2GN Member
Posts: 3644
Joined: Sat Jul 07, 2007 11:42 pm
Location: carlisle, pa.

Post by r/tguy02 » Wed Nov 17, 2010 3:37 pm

the bases are different but you can midify the 2gn one to fit a 1gn
Justin
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823

occasional demons
Junior Admin
Posts: 20097
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Wed Nov 17, 2010 5:13 pm

4668261AC $104.00
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap

mrgto68
2GN Member
Posts: 428
Joined: Tue Feb 10, 2009 6:48 pm
Location: Bethesda, MD

Post by mrgto68 » Fri Nov 19, 2010 6:08 pm

occasional demons wrote:4668261AC $104.00
Is this the same as the following part #- P5007391

Needs to accomdate the stock base Neon shift knob.
Feedback Thread:

viewtopic.php?t=44701

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Sat Nov 20, 2010 8:47 am

Wow...$220.00 more for the stock knob to fit? I know you are trying to keep a stock apearance, but damn!
If I could just figure out how to meld the Outback and the Neon into one car...

Image

occasional demons
Junior Admin
Posts: 20097
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Sat Nov 20, 2010 9:49 am

They are obviously not the same part. The one that you posted is a MP part. The one I posted is the standard replacement.

I would just exchange the current one for one of Maddog's.

Your stock knob will fit if you specify that's what you want.

http://www.maddogsts.com/pricing.php
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap

mrgto68
2GN Member
Posts: 428
Joined: Tue Feb 10, 2009 6:48 pm
Location: Bethesda, MD

Post by mrgto68 » Thu Nov 25, 2010 5:01 pm

Danteneon wrote:Wow...$220.00 more for the stock knob to fit? I know you are trying to keep a stock apearance, but damn!
This is for a SCCA Club Racing car running in Showroom Stock C. I have another 02 ACR and it has the non SRT (regular Neon) short throw with the stock knob. The shifter is just like the SRT one with the spacer plate but has the rod to accomdate the leather wrapped shift knob and OEM boot.
Feedback Thread:

viewtopic.php?t=44701

r/tguy02
2GN Member
Posts: 3644
Joined: Sat Jul 07, 2007 11:42 pm
Location: carlisle, pa.

Post by r/tguy02 » Fri Nov 26, 2010 12:08 am

I'm thinking they took a mopar sts apart and used the spacer in a regular neon shifter
Justin
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823

sneakers O'toole
2GN Member
Posts: 871
Joined: Fri Jan 13, 2006 7:11 pm
Location: The grimey ass 610

Post by sneakers O'toole » Fri Nov 26, 2010 6:21 pm

before the srt4 came out ('02 and earlier) the mopar short throw was made to use the stock knob/spring set up of the r/t (or base model, obviously) like the one on your acr. i'm not sure if they make that style anymore though. if you can find one i'm sure it'll be overpriced. i'd just get the maddog, he gives you a choice in throw reduction and a bunch of other options, it'd be cheaper too.... and it will still look stock :wink:
Official "I'm Going to Drive My Neon till it Dies" Club #000004... or not..
Image

mrgto68
2GN Member
Posts: 428
Joined: Tue Feb 10, 2009 6:48 pm
Location: Bethesda, MD

Post by mrgto68 » Fri Nov 26, 2010 6:40 pm

sneakers O'toole wrote:before the srt4 came out ('02 and earlier) the mopar short throw was made to use the stock knob/spring set up of the r/t (or base model, obviously) like the one on your acr. i'm not sure if they make that style anymore though. if you can find one i'm sure it'll be overpriced. i'd just get the maddog, he gives you a choice in throw reduction and a bunch of other options, it'd be cheaper too.... and it will still look stock :wink:
I agree completely and I will investigate that option as well. Maybe someone out there still has one of the 02 and earlier Mopar STS versions hanging around. Thanks
Feedback Thread:

viewtopic.php?t=44701

mrgto68
2GN Member
Posts: 428
Joined: Tue Feb 10, 2009 6:48 pm
Location: Bethesda, MD

Post by mrgto68 » Wed Dec 01, 2010 9:27 am

Anyone got a 00-02 Neon STS for sale?
Feedback Thread:

viewtopic.php?t=44701

occasional demons
Junior Admin
Posts: 20097
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Wed Dec 01, 2010 9:55 am

That would be better posted in the WTB section. If anyone has an older MP catalog that has the old PN for it, it may help in a web search. Prolly not, but it wouldn't hurt. Unfortunately, the "P" numbers are not included in the regular parts books.

I'd bet that even if you had the correct PN, the chances of there being one still in stock somewhere will be slim, but you never know...

This might eventually get you a pn if no one has an '00 - '02 MP Catalog: http://shop.ebay.com/i.html?_kw=mopar&_ ... kw=catalog
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap

User avatar
sidepipe87
2009 Silver Contributor
Posts: 9507
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Post by sidepipe87 » Wed Dec 01, 2010 11:23 am

couldn't you just drill a hole through the shaft of the SRT STS for the roll pin, then put the spring over it and use the stock shift knob?
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus

mrgto68
2GN Member
Posts: 428
Joined: Tue Feb 10, 2009 6:48 pm
Location: Bethesda, MD

Post by mrgto68 » Wed Dec 01, 2010 11:45 am

sidepipe87 wrote:couldn't you just drill a hole through the shaft of the SRT STS for the roll pin, then put the spring over it and use the stock shift knob?
That isn't a bad idea!!! I have a spare SRT STS I could modify for this purpose. You are correct in identifying this as the only real difference between the two units. Outstanding suggestion!
Feedback Thread:

viewtopic.php?t=44701

User avatar
sidepipe87
2009 Silver Contributor
Posts: 9507
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Post by sidepipe87 » Wed Dec 01, 2010 1:59 pm

I just took my stock shifter out to throw in an SRT shifter, and that was the only difference other than the cut out on the top of the SRT shifter for the ball. I guess you'd just have to measure down to the roll pin and drill a hole in the same location on the SRT STS. In theory, it should work.
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus

r/tguy02
2GN Member
Posts: 3644
Joined: Sat Jul 07, 2007 11:42 pm
Location: carlisle, pa.

Post by r/tguy02 » Wed Dec 01, 2010 2:44 pm

r/tguy02 wrote:I'm thinking they took a mopar sts apart and used the spacer in a regular neon shifter
or do the suggestion i said earlier ^^^ and save yourself the drilling. All you have to do is swap over the spacer block as far as i know
Justin
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823

User avatar
sidepipe87
2009 Silver Contributor
Posts: 9507
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Post by sidepipe87 » Wed Dec 01, 2010 2:49 pm

won't the rod be longer though?
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus

mrgto68
2GN Member
Posts: 428
Joined: Tue Feb 10, 2009 6:48 pm
Location: Bethesda, MD

Post by mrgto68 » Thu Mar 31, 2011 3:24 pm

Made my own... Cut the top portion of the rod off the Neon shifter and welded onto the SRT STS.
Feedback Thread:

viewtopic.php?t=44701

Post Reply

Return to “PN Interior”