Stuff your bringing to Carlisle to sell

randomZERO · Post by **randomZERO** » Thu Jun 18, 2009 6:40 pm

Forgot who made this thread but we are getting close to the show so what you selling?
I have front control arms with no bushings but fresh moot ball joints pressed in. Also a set of rear arms that will come with fresh prothane bushings to be pressed in. I also have some prothane swaybar bushings leftover from my kit up for grabs.

Haganracing · Post by **Haganracing** » Thu Jun 18, 2009 6:43 pm

Might bring up lowering springs that i had on my 02 neon.. and maybe a duel exhaust (rear wheel back)

-chris

Post by **Diablo0** » Thu Jun 18, 2009 6:46 pm

If someone wants to buy a damaged SRT wheel, I'll bring it... again, only if I receive payment for wheel first

2k1MotorSport · Post by **2k1MotorSport** » Thu Jun 18, 2009 6:57 pm

are you still selling that SRT wheel?

I have a nice list of neon randomness that i will be bringing. I will post it up later or tomorrow.

Wenuden · Post by **Wenuden** » Thu Jun 18, 2009 6:59 pm

Diablo0 wrote:If someone wants to buy a damaged SRT wheel, I'll bring it... again, only if I receive payment for wheel first

they're pretty heavy... i bet the scrap yard would give you $25 for it. i got $40 for 2 mangled aluminum thunderbird wheels a few years ago.

Post by **Diablo0** » Thu Jun 18, 2009 7:09 pm

I did have it sold but the person that bought it from wanted to return it since the damage was more than they wanted. It's not extremely bad, could be used for a full size spare...

randomZERO · Post by **randomZERO** » Thu Jun 18, 2009 7:16 pm

We should set up a little seperate swap meet tent near our main tent to put up sale signs and stuff

Post by **Diablo0** » Thu Jun 18, 2009 7:51 pm

I believe Carlisle sort of fowns upon things like that since it's the show field and not the swap meet area so you do so at your own risk. Better to do all the dealings at the Hotel.

randomZERO · Post by **randomZERO** » Thu Jun 18, 2009 8:32 pm

Ok didn't know that well if someone wants someones stuff just pm them and bring it. I will only be there saturday

2k1MotorSport · Post by **2k1MotorSport** » Sat Jun 20, 2009 11:26 am

My list of parts for carlisle is as follows...

2 - ATX Leather shift knobs
10 - 2.0L Injector Covers
2 - MTX leather shift knobs
5 - Trunk carpets (w/o clips)

One of the following...
USA Spec universal mp3 adapter, Prothane Suspension Shorter End Link set (brand new), Chrysler branded drivers airbag, Blaze Red HVAC cover, CD changer delete cover, CD changer bezel, neon branded mud flaps, basic rear speaker deck (no middle belt and no child restraints), stock R/T sway bars

That should be it for now...

Mat00ES · Post by **Mat00ES** » Sat Jun 20, 2009 11:45 am

I have a shale green trunk lid with hammerhead holes, a 00-02 radio install kit, and maybe a throttle body, not 100% sure what kind.

Adam G · Post by **Adam G** » Sat Jun 20, 2009 12:05 pm

I got a whole storage unit full of wheels and 1st gen stuff only minutes from the hotel

Danteneon · Post by **Danteneon** » Sat Jun 20, 2009 12:12 pm

I will be bringing many assorted bits and pieces with me. I don't even know the full extent of what I have in my inventory yet

teamliviD · Post by **teamliviD** » Sat Jun 20, 2009 7:03 pm

i have a set of 8.5:1 JE pistons and Eagle rods i might bring. $400 takes them home.

bone-yard-racing · Post by **bone-yard-racing** » Sat Jun 20, 2009 8:03 pm

Anybody have a mag intake?

randomZERO · Post by **randomZERO** » Sat Jun 20, 2009 8:08 pm

Yes Blair yes I do, but you can't has it.

Mat00ES · Post by **Mat00ES** » Sun Jun 21, 2009 12:34 am

ohh I also have a full 97 r/t motor and tranny, no sure how'd I'd get it down there.

Passt · Post by **Passt** » Sun Jun 21, 2009 6:03 am

Adam G wrote:I got a whole storage unit full of wheels and 1st gen stuff only minutes from the hotel

I'm interested in seeing all the 1gn stuff .....

JeffM · Post by **JeffM** » Sun Jun 21, 2009 6:39 am

2k1MotorSport wrote:2 - ATX Leather shift knobs

Ooo for how much?

2k1MotorSport · Post by **2k1MotorSport** » Sun Jun 21, 2009 12:40 pm

JeffM wrote:
2k1MotorSport wrote:2 - ATX Leather shift knobs
Ooo for how much?

$15 takes one

JeffM · Post by **JeffM** » Sun Jun 21, 2009 12:43 pm

Hmmmm...I guess I'll have to at least bring $15 to Carlisle

AllMotorWes · Post by **AllMotorWes** » Sun Jun 21, 2009 5:18 pm

I can bring: (if anyone want's it.)

SPW Polished Aluminum Front Strut Bar (1GN) :: $30.00

SRT 17" Rims w/ Riken Performance Tires (205/40/17) :: $250.00
Front 2 tires are pretty bald, and 1 rim has a 1.5" gash on the out lip. (Never leaked, been driving on them for over a year and never had any issues. Also the minor scratches and whatnot you'd expect from a DD Neon.)

Red 52mm (ATx) throttlebody (1GN) (mint condition) :: $30.00

Black Passenger Side MotorMount (1GN) practicially new :: $25.00

Mopar Pro 5 Performance Battery :: $35.00

Silver Powdercoated Passenger Motor Mount Bracket (no insert) (1GN) :: $20.00
*if you want the insert from the Black Motor Mount, it'll be an extra $5.00

Silver Powdercoated Transmission Motor Mount Bracket (no insert) (1GN) :: $20.00

Throttle Position Sensor (TPS) (1GN) :: $5.00

Idle Air Controller (IAC) (1GN) :: $5.00

**Sorry I don't have much for you 2gn guys. If anyone is pretty sure they want any of this, please PM me so I can make sure to bring it.

dodge_girl · Post by **dodge_girl** » Sun Jun 21, 2009 9:08 pm

i have 03-05 headlights and tail lights both are mint condition
factory 6 disc changer and radio
sxt wing graphite

Post by **Canada** » Sun Jun 21, 2009 9:08 pm

Passt wrote:
Adam G wrote:I got a whole storage unit full of wheels and 1st gen stuff only minutes from the hotel
I'm interested in seeing all the 1gn stuff .....

Guess you, me and my truck are going for a drive to Adams house Nate LOL

Adam G · Post by **Adam G** » Sun Jun 21, 2009 10:35 pm

hahahaha we can talk at the hotel

lilnicko11 · Post by **lilnicko11** » Mon Jun 22, 2009 12:43 am

anyone wanna buy an asian driver ???? =)

^kidding.......

Pocahontas · Post by **Pocahontas** » Mon Jun 22, 2009 11:13 am

2k1MotorSport wrote:
JeffM wrote:
2k1MotorSport wrote:2 - ATX Leather shift knobs
Ooo for how much?
$15 takes one

Same goes for the manual shift knob?

Trinity · Post by **Trinity** » Mon Jun 22, 2009 12:06 pm

ill be interested in aftermarket 1gn stuff... nothing stock.

ive got stock 1gn stuff and still plenty of 2gn crap laying around. most of it is very large however soooo I will not be bringing anything unless someone says they want it. ill take pics later to show things I got sitting around

2k1MotorSport · Post by **2k1MotorSport** » Mon Jun 22, 2009 12:29 pm

Pocahontas wrote:
2k1MotorSport wrote:
JeffM wrote: Ooo for how much?
$15 takes one
Same goes for the manual shift knob?

yup. i guess they fit a 1gn... not sure.

bone-yard-racing · Post by **bone-yard-racing** » Mon Jun 22, 2009 2:36 pm

You push the roll pin out of the 1gn shifter and use a bolt/nut to hold it on

2gn R/T shift knob in my acr: