2GN.ORG

Posted: **Tue Aug 10, 2010 12:00 am**

So I came across these swiss cheese wheels on a vw passat and an integra. that crowd incorrectly refers to these as the "pepperoni" wheels, when they mean pizza, and in fact these aren't even them. but anyway... thought it was interesting. I'd never seen anyone run these before

http://i109.photobucket.com/albums/n62/ ... 1271783750

Posted: **Tue Aug 10, 2010 12:01 am**

hmm, not a fan but they do look better on a slammed car.

Posted: **Tue Aug 10, 2010 12:08 am**

I'd rock em. Painted a nice, "dirty green cheese" color.

Posted: **Tue Aug 10, 2010 12:10 am**

^no... polished up is when they look the best!

Posted: **Tue Aug 10, 2010 12:11 am**

Oh yeah. That's what I meant. My keyboard is bruk.

Posted: **Tue Aug 10, 2010 12:16 am**

not my cup of tea.

Posted: **Tue Aug 10, 2010 12:39 am**

that guys balls are hangin a lil far to the left

Posted: **Tue Aug 10, 2010 6:30 pm**

Look like the old Shelby Lancer wheels from the 80's...

Posted: **Tue Aug 10, 2010 7:37 pm**

grambo wrote:Look like the old Shelby Lancer wheels from the 80's...

They are!

Posted: **Tue Aug 10, 2010 8:10 pm**

Ntyvirus1 wrote:not my cup of tea.

Posted: **Tue Aug 10, 2010 8:44 pm**

grambo wrote:Look like the old Shelby Lancer wheels from the 80's...

They're from an Omni actually.

Shelby Charger

Posted: **Tue Aug 10, 2010 8:45 pm**

yeah only looked good on the shelby's IMHO

Posted: **Tue Aug 10, 2010 8:46 pm**

i'd rock the shit out of those on the box

Posted: **Tue Aug 10, 2010 9:27 pm**

You stole this from the turbo forum lmao.

Posted: **Tue Aug 10, 2010 9:30 pm**

smallblockfreak wrote:You stole this from the turbo forum lmao.

huh?

I googled something and saw them on the vw. The rest of the pics I found on various forums. I didn't take it from anywhere.

Posted: **Tue Aug 10, 2010 9:54 pm**

http://www.turbo-mopar.com/forums/showt ... hp?t=51471

I thought you were on one of the turbo forums be it turbododge or turbo-mopar. When you had the spirit.

Posted: **Tue Aug 10, 2010 11:04 pm**

Yeah I was on turbododge. still have the account. Never saw that thread though. I can't see it anyway. It says I have to log in.

Posted: **Tue Aug 10, 2010 11:54 pm**

the wheels on the shelby arent the same as the ones on all the cars in the original post

Posted: **Wed Aug 11, 2010 2:26 am**

not a fan

Posted: **Wed Aug 11, 2010 9:22 am**

The pizza wheel was accompanied for the 1984 model year by a similar wheel known most commonly as the swiss cheese wheel because of its numerous holes of different sizes that are scattered all over the wheel's surface. This wheel was used on various vehicles, but only for a short time. It was introduced in the 1984 model year, wherein it could be attached to just about every high-performance and/or turbocharged car made by Dodge and Chrysler - standard on the Daytona turbo, Lazer turbo, and Omni GLH (but not the Shelby Charger); it was also optionally used (when 15" wheels were called for) on some K-car based vehicles (400 and 600, etc). As it turns out, swiss cheese wheels were used on at least a few cars into the 1985 model year until it was phased out completely; thus there are 4-lug and 5-lug versions of it in existence. All swiss cheese wheels had 40 holes (count 'em!) and measured 6.0" wide.

http://www.dempseybowling.com/shelby/wheel101.htm

Posted: **Wed Aug 11, 2010 9:50 am**

I had a couple of those. They were on the LZE44 (Omni)

Basically a no name pre turbo version of the GLH.

Not sure if they are still around or not. Didn't have the full set, as the car was severely abused when I bought it.

Posted: **Wed Aug 11, 2010 10:20 am**

sidepipe87 wrote:
grambo wrote:Look like the old Shelby Lancer wheels from the 80's...
They're from an Omni actually.

Shelby Charger

http://www.dempseybowling.com/shelby/wheel101.htm

My dad owned, both a Shelby Lancer and a Lancer Pacifica. Both cars had the swiss cheese wheels. I remember vividly helping him to hand-paint the insides of the circles/bubbles/cheese holes black with Testor's Model paint.

Posted: **Wed Aug 11, 2010 2:04 pm**

DOSneons wrote:the wheels on the shelby arent the same as the ones on all the cars in the original post

Oops! That's what happens when I'm tired. I accidentally posted Pizza wheels

grambo wrote:
sidepipe87 wrote:
grambo wrote: My dad owned, both a Shelby Lancer and a Lancer Pacifica. Both cars had the swiss cheese wheels. I remember vividly helping him to hand-paint the insides of the circles/bubbles/cheese holes black with Testor's Model paint.

Lancers had either lace wheels or painted crabs. The Pacifica had crab-style wheels

Posted: **Wed Aug 11, 2010 2:08 pm**

sidepipe87 wrote:
DOSneons wrote:the wheels on the shelby arent the same as the ones on all the cars in the original post
Oops! That's what happens when I'm tired. I accidentally posted Pizza wheels

grambo wrote:
sidepipe87 wrote: Lancers had either lace wheels or painted crabs. The Pacifica had crab-style wheels

He must have purchased them off of a wreck or something then. Or maybe they were spares floating around the house. He had a couple of GLHS Omni's and some Chargers and Daytona's too. I lived in a used car lot apparently...lolz

Posted: **Wed Aug 11, 2010 2:19 pm**

^haha apparently so

Posted: **Wed Aug 11, 2010 2:22 pm**

sidepipe87 wrote:^haha apparently so

His current yard:

2006 SRT8 300C
2005 Magnum R/T Katrina car
2005 Magnum R/T burn victim
2001 Dodge Dakota SLT Club Cab or wtf they call it
2009 Chrysler Aspen LOADED
1969 Dodge Dart built 383 4bbl Mad Max Track car

Its comical.

Posted: **Wed Aug 11, 2010 2:24 pm**

Well shit at least they are newer, quality cars.

Everyone's JY front yards around here are old ass Turcels and whatnot. Rusted through, and will NEVER move as long as the trailor is staying on that lot.

Posted: **Wed Aug 11, 2010 2:24 pm**

Posted: **Wed Aug 11, 2010 2:27 pm**

The two maggies are parts whores. He wants to do a modern R/T engine and driveline swap into the Dart for fun.

2GN.ORG

swiss cheese wheels on dubs and hondas??

swiss cheese wheels on dubs and hondas??