How-To: Cam Install

nerox · Post by **nerox** » Tue Mar 27, 2012 8:46 am

Anyone know if those 3 bolts screw into that block or do they just pass through and Bolt into the engine?

And what thread they are?

Post by **occasional demons** » Tue Mar 27, 2012 12:32 pm

Which three bolts?

nerox · Post by **nerox** » Tue Mar 27, 2012 1:19 pm

Sorry I mean the 3 on that big plate on the left side of the engine, that you have to jack the engine up to get to

Post by **occasional demons** » Tue Mar 27, 2012 1:39 pm

They go into the engine block.

Prolly 10 mm x 1.50 but just guessing. I will attempt to find them in the parts to see if they have detailed info.

nerox · Post by **nerox** » Sun Apr 01, 2012 2:33 pm

quicksilvr wrote:25. Take the positioning magnet out of the old cam and put it in the new one. It's a Torx head screw holding it in, I forget which size.

Its a T30, for whoever is interested

Yellow04r/t · Post by **Yellow04r/t** » Thu Oct 04, 2012 3:04 pm

Awesome write up! Will definatly use for when I replace my timing belt and drop a conp 400 in this winter

2GN.ORG

How-To: Cam Install

Re: How-To: Cam Install