How-To: Affordable exhaust options....

User avatar
neonjake27
2GN Member
Posts: 92
Joined: Thu Mar 18, 2010 8:31 am
Location: Wadstucky,ohio

Post by neonjake27 » Wed Jul 28, 2010 10:55 am

yeah i got a moroso spiralflow for 50 at summit ... got my whole exhaust done in 2.5" for 90 bucks at a local shop. sounds good and cheap
2.4 dohc head swap, boosted

mikeb818
2GN Member
Posts: 630
Joined: Wed Aug 19, 2009 7:19 pm
Location: SoCal

Post by mikeb818 » Wed Jul 28, 2010 1:23 pm

hmmm.....just get the 1gn piping with a moroso exhaust. have them put it in the middle. side exit exhaust maybe?? my srt-4 catback is too loud
| 94 BMW 325i Sedan |
| 04 MTX Flame Red SXT |- TOTALLED

User avatar
sidepipe87
2009 Silver Contributor
Posts: 9516
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Post by sidepipe87 » Wed Jul 28, 2010 2:10 pm

mikeb818 wrote:hmmm.....just get the 1gn piping with a moroso exhaust. have them put it in the middle. side exit exhaust maybe?? my srt-4 catback is too loud
did that with two and it was still ungodly loud and the drone was making me deaf.. I just had a real DynoMax Super Turbo muffler welded in the rear. It' super quiet now.


WARNING TO ALL: Dynomax part 52148 that goes from the intermediate pipe to the muffler is DISCONTINUED with no superceding part number so have fun making a piece to fit. It sucks...


As far as the sway and 2.5" piping... not even close to being a problem. I have a huge Hotchkis bar and there is still plenty of room.
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus

User avatar
Neon4Life
2009 Silver Contributor
Posts: 4250
Joined: Tue Sep 16, 2008 1:56 pm
Location: Indiana

Post by Neon4Life » Wed Jul 28, 2010 3:59 pm

Well since I want something that will last me a while..I'm going to go with the stainless steel 2.5" I showed in the link.

OD says his is still in good shape. So at least I know someone that has feedback on it.
Official "I'm Going to Drive My Neon till it Dies" Club #000048

NickKo
2009 Gold Contributor
Posts: 2248
Joined: Sun Jun 11, 2006 11:24 am
Location: IL./WI.border

Post by NickKo » Fri Jul 30, 2010 5:39 pm

occasional demons wrote:It cleared mine with no trouble. :thumbup:
sidepipe87 wrote: WARNING TO ALL: Dynomax part 52148 that goes from the intermediate pipe to the muffler is DISCONTINUED with no superceding part number so have fun making a piece to fit. It sucks...


As far as the sway and 2.5" piping... not even close to being a problem. I have a huge Hotchkis bar and there is still plenty of room.

Great to know..... THANKS for the updated info, Everyone !! :thumbup: :D


- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm

Official "I'm Going to Drive My Neon till it Dies" Club #000009

User avatar
stairmaster3001
2GN Member
Posts: 524
Joined: Wed Oct 13, 2010 11:17 am
Location: mooresville

Post by stairmaster3001 » Sun Feb 13, 2011 3:49 pm

the best exhaust and cheapest is probably srt4 exhaust. I got mine for $40 bucks

User avatar
sidepipe87
2009 Silver Contributor
Posts: 9516
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Post by sidepipe87 » Sun Feb 13, 2011 4:06 pm

no muffler...
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus

Post Reply

Return to “HT Engine”